## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
## @param global.storageClass Global StorageClass for Persistent Volume(s)
##
global:
  imageRegistry:
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  storageClass:

## @section Common parameters

## @param kubeVersion Override Kubernetes version
##
kubeVersion:
## @param nameOverride String to partially override common.names.fullname
##
nameOverride:
## @param fullnameOverride String to fully override common.names.fullname
##
fullnameOverride:
## @param commonLabels Labels to add to all deployed objects
##
commonLabels: {}
## @param commonAnnotations Annotations to add to all deployed objects
##
commonAnnotations: {}
## @param extraDeploy Array of extra objects to deploy with the release
##
extraDeploy: []
## @param enableIPv6 Enable IPv6 configuration
##
enableIPv6: false

## @section Traffic Exposure Parameters

## Configure the ingress resource that allows you to access the Kubeapps installation
## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/
##
ingress:
  ## @param ingress.enabled Enable ingress record generation for Kubeapps
  ##
  enabled: false
  ## @param ingress.apiVersion Force Ingress API version (automatically detected if not set)
  ##
  apiVersion:
  ## @param ingress.hostname Default host for the ingress record
  ##
  hostname: kubeapps.local
  ## @param ingress.path Default path for the ingress record
  ## NOTE: You may need to set this to '/*' in order to use this with ALB ingress controllers
  ##
  path: /
  ## @param ingress.pathType Ingress path type
  ##
  pathType: ImplementationSpecific
  ## @param ingress.annotations [object] Additional custom annotations for the ingress record
  ## NOTE: If `ingress.certManager=true`, annotation `kubernetes.io/tls-acme: "true"` will automatically be added
  ##
  annotations:
    nginx.ingress.kubernetes.io/proxy-read-timeout: "600"
  ## @param ingress.tls Enable TLS configuration for the host defined at `ingress.hostname` parameter
  ## TLS certificates will be retrieved from a TLS secret with name: `{{- printf "%s-tls" .Values.ingress.hostname }}`
  ## You can:
  ##   - Use the `ingress.secrets` parameter to create this TLS secret
  ##   - Relay on cert-manager to create it by setting `ingress.certManager=true`
  ##   - Relay on Helm to create self-signed certificates by setting `ingress.selfSigned=true`
  ##
  tls: false
  ## @param ingress.certManager Add the corresponding annotations for cert-manager integration
  ##
  certManager: false
  ## @param ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
  ##
  selfSigned: false
  ## @param ingress.extraHosts An array with additional hostname(s) to be covered with the ingress record
  ## e.g:
  ## extraHosts:
  ##   - name: kubeapps.local
  ##     path: /
  ##
  extraHosts: []
  ## @param ingress.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host
  ## e.g:
  ## extraPaths:
  ## - path: /*
  ##   backend:
  ##     serviceName: ssl-redirect
  ##     servicePort: use-annotation
  ##
  extraPaths: []
  ## @param ingress.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record
  ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
  ## e.g:
  ## extraTls:
  ## - hosts:
  ##     - kubeapps.local
  ##   secretName: kubeapps.local-tls
  ##
  extraTls: []
  ## @param ingress.secrets Custom TLS certificates as secrets
  ## NOTE: 'key' and 'certificate' are expected in PEM format
  ## NOTE: 'name' should line up with a 'secretName' set further up
  ## If it is not set and you're using cert-manager, this is unneeded, as it will create a secret for you with valid certificates
  ## If it is not set and you're NOT using cert-manager either, self-signed certificates will be created valid for 365 days
  ## It is also possible to create and manage the certificates outside of this helm chart
  ## Please see README.md for more information
  ## e.g:
  ## secrets:
  ##   - name: kubeapps.local-tls
  ##     key: |-
  ##       -----BEGIN RSA PRIVATE KEY-----
  ##       ...
  ##       -----END RSA PRIVATE KEY-----
  ##     certificate: |-
  ##       -----BEGIN CERTIFICATE-----
  ##       ...
  ##       -----END CERTIFICATE-----
  ##
  secrets: []

## @section Frontend parameters

## Frontend parameters
##
frontend:
  ## Bitnami NGINX image
  ## ref: https://hub.docker.com/r/bitnami/nginx/tags/
  ## @param frontend.image.registry NGINX image registry
  ## @param frontend.image.repository NGINX image repository
  ## @param frontend.image.tag NGINX image tag (immutable tags are recommended)
  ## @param frontend.image.pullPolicy NGINX image pull policy
  ## @param frontend.image.pullSecrets NGINX image pull secrets
  ## @param frontend.image.debug Enable image debug mode
  ##
  image:
    registry: docker.io
    repository: bitnami/nginx
    tag: 1.21.1-debian-10-r4
    ## Specify a imagePullPolicy
    ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
    ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
    ## Enable debug mode
    ##
    debug: false
  ## @param frontend.proxypassAccessTokenAsBearer Use access_token as the Bearer when talking to the k8s api server
  ## NOTE: Some K8s distributions such as GKE requires it
  ##
  proxypassAccessTokenAsBearer: false
  ## @param frontend.proxypassExtraSetHeader Set an additional proxy header for all requests proxied via NGINX
  ## Authorization header(s) set in this way will be included with the request from kubeops to the k8s service API URL.
  ## ref: https://github.com/kubeapps/kubeapps/blob/7e31d0e7241f826aa365856c134cf901d40890e7/pkg/http-handler/http-handler.go#L247
  ## e.g:
  ## proxypassExtraSetHeader: Authorization "Bearer $cookie_sessionid";
  ##
  proxypassExtraSetHeader:
  ## @param frontend.largeClientHeaderBuffers  Set large_client_header_buffers in NGINX config
  ## NOTE: Can be required when using OIDC or LDAP due to large cookies
  ##
  largeClientHeaderBuffers: "4 32k"
  ## @param frontend.replicaCount Number of frontend replicas to deploy
  ##
  replicaCount: 2
  ## Frontend containers' resource requests and limits
  ## ref: http://kubernetes.io/docs/user-guide/compute-resources/
  ## @param frontend.resources.limits.cpu The CPU limits for the NGINX container
  ## @param frontend.resources.limits.memory The memory limits for the NGINX container
  ## @param frontend.resources.requests.cpu The requested CPU for the NGINX container
  ## @param frontend.resources.requests.memory The requested memory for the NGINX container
  ##
  resources:
    limits:
      cpu: 250m
      memory: 128Mi
    requests:
      cpu: 25m
      memory: 32Mi
  ## @param frontend.extraEnvVars Array with extra environment variables to add to the NGINX container
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param frontend.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for the NGINX container
  ##
  extraEnvVarsCM:
  ## @param frontend.extraEnvVarsSecret Name of existing Secret containing extra env vars for the NGINX container
  ##
  extraEnvVarsSecret:
  ## @param frontend.containerPort NGINX HTTP container port
  ##
  containerPort: 8080
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param frontend.podSecurityContext.enabled Enabled frontend pods' Security Context
  ## @param frontend.podSecurityContext.fsGroup Set frontend pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroup: 1001
  ## Configure Container Security Context (only main container)
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param frontend.containerSecurityContext.enabled Enabled NGINX containers' Security Context
  ## @param frontend.containerSecurityContext.runAsUser Set NGINX container's Security Context runAsUser
  ## @param frontend.containerSecurityContext.runAsNonRoot Set NGINX container's Security Context runAsNonRoot
  ##
  containerSecurityContext:
    enabled: true
    runAsUser: 1001
    runAsNonRoot: true
  ## Configure extra options for frontend containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param frontend.livenessProbe.enabled Enable livenessProbe
  ## @skip frontend.livenessProbe.httpGet
  ## @param frontend.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param frontend.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param frontend.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param frontend.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param frontend.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    httpGet:
      path: /healthz
      port: 8080
    initialDelaySeconds: 60
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 6
    successThreshold: 1
  ## @param frontend.readinessProbe.enabled Enable readinessProbe
  ## @skip frontend.readinessProbe.httpGet
  ## @param frontend.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param frontend.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param frontend.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param frontend.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param frontend.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    httpGet:
      path: /
      port: 8080
    initialDelaySeconds: 0
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 6
    successThreshold: 1
  ## @param frontend.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param frontend.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## @param frontend.lifecycleHooks Custom lifecycle hooks for frontend containers
  ##
  lifecycleHooks: {}
  ## @param frontend.podLabels Extra labels for frontend pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param frontend.podAnnotations Annotations for frontend pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param frontend.podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param frontend.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## nodeAffinityPreset Node affinity preset
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param frontend.nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param frontend.nodeAffinityPreset.key Node label key to match. Ignored if `affinity` is set
    ##
    key: ""
    ## @param frontend.nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param frontend.affinity Affinity for pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: frontend.podAffinityPreset, frontend.podAntiAffinityPreset, and frontend.nodeAffinityPreset will be ignored when it's set
  ##
  affinity: {}
  ## @param frontend.nodeSelector Node labels for pod assignment
  ## ref: https://kubernetes.io/docs/user-guide/node-selection/
  ##
  nodeSelector: {}
  ## @param frontend.tolerations Tolerations for pod assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param frontend.priorityClassName Priority class name for frontend pods
  ##
  priorityClassName:
  ## @param frontend.hostAliases Custom host aliases for frontend pods
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param frontend.extraVolumes Optionally specify extra list of additional volumes for frontend pods
  ##
  extraVolumes: []
  ## @param frontend.extraVolumeMounts Optionally specify extra list of additional volumeMounts for frontend container(s)
  ##
  extraVolumeMounts: []
  ## @param frontend.sidecars Add additional sidecar containers to the frontend pod
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: {}
  ## @param frontend.initContainers Add additional init containers to the frontend pods
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: {}
  ## Frontend service parameters
  ##
  service:
    ## @param frontend.service.type Frontend service type
    ##
    type: ClusterIP
    ## @param frontend.service.port Frontend service HTTP port
    ##
    port: 80
    ## @param frontend.service.nodePort Node port for HTTP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#nodeport
    ##
    nodePort:
    ## @param frontend.service.clusterIP Frontend service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP:
    ## @param frontend.service.loadBalancerIP Frontend service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP:
    ## @param frontend.service.loadBalancerSourceRanges Frontend service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param frontend.service.externalTrafficPolicy Frontend service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param frontend.service.annotations Additional custom annotations for frontend service
    ##
    annotations: {}

## @section Dashboard parameters

## Dashboard parameters
##
dashboard:
  ## Bitnami Kubeapps Dashboard image
  ## ref: https://hub.docker.com/r/bitnami/kubeops/tags/
  ## @param dashboard.image.registry Dashboard image registry
  ## @param dashboard.image.repository Dashboard image repository
  ## @param dashboard.image.tag Dashboard image tag (immutable tags are recommended)
  ## @param dashboard.image.pullPolicy Dashboard image pull policy
  ## @param dashboard.image.pullSecrets Dashboard image pull secrets
  ## @param dashboard.image.debug Enable image debug mode
  ##
  image:
    registry: docker.io
    repository: bitnami/kubeapps-dashboard
    tag: 2.3.3-debian-10-r2
    ## Specify a imagePullPolicy
    ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
    ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
    ## Enable debug mode
    ##
    debug: false
  ## @param dashboard.customStyle Custom CSS injected to the Dashboard to customize Kubeapps look and feel
  ## e.g:
  ##  customStyle: |-
  ##    .header.header-7 {
  ##      background-color: #991700;
  ##    }
  ##
  customStyle: ""
  ## @param dashboard.customComponents Custom Form components injected into the BasicDeploymentForm
  ## ref: https://github.com/kubeapps/kubeapps/blob/master/docs/developer/custom-form-component-support.md
  ##
  customComponents: ""
  ## @param dashboard.customLocale Custom translations injected to the Dashboard to customize the strings used in Kubeapps
  ## ref: https://github.com/kubeapps/kubeapps/blob/master/docs/developer/translate-kubeapps.md
  ## e.g:
  ## customLocale:
  ##   "Kubeapps": "My Dashboard"
  ##   "login-oidc": "Login with my company SSO"
  ##
  customLocale: ""
  ## @param dashboard.replicaCount Number of Dashboard replicas to deploy
  ##
  replicaCount: 2
  ## @param dashboard.extraEnvVars Array with extra environment variables to add to the Dashboard container
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param dashboard.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for the Dashboard container
  ##
  extraEnvVarsCM:
  ## @param dashboard.extraEnvVarsSecret Name of existing Secret containing extra env vars for the Dashboard container
  ##
  extraEnvVarsSecret:
  ## @param dashboard.containerPort Dashboard HTTP container port
  ##
  containerPort: 8080
  ## Dashboard containers' resource requests and limits
  ## ref: http://kubernetes.io/docs/user-guide/compute-resources/
  ## @param dashboard.resources.limits.cpu The CPU limits for the Dashboard container
  ## @param dashboard.resources.limits.memory The memory limits for the Dashboard container
  ## @param dashboard.resources.requests.cpu The requested CPU for the Dashboard container
  ## @param dashboard.resources.requests.memory The requested memory for the Dashboard container
  ##
  resources:
    limits:
      cpu: 250m
      memory: 128Mi
    requests:
      cpu: 25m
      memory: 32Mi
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param dashboard.podSecurityContext.enabled Enabled Dashboard pods' Security Context
  ## @param dashboard.podSecurityContext.fsGroup Set Dashboard pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroup: 1001
  ## Configure Container Security Context (only main container)
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param dashboard.containerSecurityContext.enabled Enabled Dashboard containers' Security Context
  ## @param dashboard.containerSecurityContext.runAsUser Set Dashboard container's Security Context runAsUser
  ## @param dashboard.containerSecurityContext.runAsNonRoot Set Dashboard container's Security Context runAsNonRoot
  ##
  containerSecurityContext:
    enabled: true
    runAsUser: 1001
    runAsNonRoot: true
  ## Configure extra options for Dashboard containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param dashboard.livenessProbe.enabled Enable livenessProbe
  ## @skip dashboard.livenessProbe.httpGet
  ## @param dashboard.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param dashboard.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param dashboard.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param dashboard.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param dashboard.livenessProbe.successThreshold Success threshold for livenessProbe
  ## Dashboard containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ##
  livenessProbe:
    enabled: true
    httpGet:
      path: /
      port: 8080
    initialDelaySeconds: 60
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 6
    successThreshold: 1
  ## @param dashboard.readinessProbe.enabled Enable readinessProbe
  ## @skip dashboard.readinessProbe.httpGet
  ## @param dashboard.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param dashboard.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param dashboard.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param dashboard.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param dashboard.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    httpGet:
      path: /
      port: 8080
    initialDelaySeconds: 0
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 6
    successThreshold: 1
  ## @param dashboard.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param dashboard.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## @param dashboard.lifecycleHooks Custom lifecycle hooks for Dashboard containers
  ##
  lifecycleHooks: {}
  ## @param dashboard.podLabels Extra labels for Dasbhoard pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param dashboard.podAnnotations Annotations for Dasbhoard pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param dashboard.podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param dashboard.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Node affinity preset
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param dashboard.nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param dashboard.nodeAffinityPreset.key Node label key to match. Ignored if `affinity` is set
    ##
    key: ""
    ## @param dashboard.nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param dashboard.affinity Affinity for pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: dashboard.podAffinityPreset, dashboard.podAntiAffinityPreset, and dashboard.nodeAffinityPreset will be ignored when it's set
  ##
  affinity: {}
  ## @param dashboard.nodeSelector Node labels for pod assignment
  ## ref: https://kubernetes.io/docs/user-guide/node-selection/
  ##
  nodeSelector: {}
  ## @param dashboard.tolerations Tolerations for pod assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param dashboard.priorityClassName Priority class name for Dashboard pods
  ##
  priorityClassName:
  ## @param dashboard.hostAliases Custom host aliases for Dashboard pods
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param dashboard.extraVolumes Optionally specify extra list of additional volumes for Dasbhoard pods
  ##
  extraVolumes: []
  ## @param dashboard.extraVolumeMounts Optionally specify extra list of additional volumeMounts for Dasbhoard container(s)
  ##
  extraVolumeMounts: []
  ## @param dashboard.sidecars Add additional sidecar containers to the Dasbhoard pod
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: {}
  ## @param dashboard.initContainers Add additional init containers to the Dasbhoard pods
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: {}
  ## Dasbhoard service parameters
  ##
  service:
    ## @param dashboard.service.port Dasbhoard service HTTP port
    ##
    port: 8080
    ## @param dashboard.service.annotations Additional custom annotations for Dasbhoard service
    ##
    annotations: {}

## @section AppRepository Controller parameters

## AppRepository Controller parameters
##
apprepository:
  ## Bitnami Kubeapps AppRepository Controller image
  ## ref: https://hub.docker.com/r/bitnami/kubeapps-apprepository-controller/tags/
  ## @param apprepository.image.registry Kubeapps AppRepository Controller image registry
  ## @param apprepository.image.repository Kubeapps AppRepository Controller image repository
  ## @param apprepository.image.tag Kubeapps AppRepository Controller image tag (immutable tags are recommended)
  ## @param apprepository.image.pullPolicy Kubeapps AppRepository Controller image pull policy
  ## @param apprepository.image.pullSecrets Kubeapps AppRepository Controller image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/kubeapps-apprepository-controller
    tag: 2.3.3-scratch-r0
    ## Specify a imagePullPolicy
    ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
    ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## Bitnami Kubeapps Asset Syncer image
  ## ref: https://hub.docker.com/r/bitnami/kubeapps-asset-syncer/tags/
  ## @param apprepository.syncImage.registry Kubeapps Asset Syncer image registry
  ## @param apprepository.syncImage.repository Kubeapps Asset Syncer image repository
  ## @param apprepository.syncImage.tag Kubeapps Asset Syncer image tag (immutable tags are recommended)
  ## @param apprepository.syncImage.pullPolicy Kubeapps Asset Syncer image pull policy
  ## @param apprepository.syncImage.pullSecrets Kubeapps Asset Syncer image pull secrets
  ##
  syncImage:
    registry: docker.io
    repository: bitnami/kubeapps-asset-syncer
    tag: 2.3.3-scratch-r0
    ## Specify a imagePullPolicy
    ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
    ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param apprepository.initialRepos [array] Initial chart repositories to configure
  ## e.g:
  ## initialRepos:
  ## - name: chartmuseum
  ##   url: https://chartmuseum.default:8080
  ##   nodeSelector:
  ##     somelabel: somevalue
  ##   # Specify an Authorization Header if you are using an authentication method.
  ##   authorizationHeader: "Bearer xrxNC..."
  ##   # If you're providing your own certificates, please use this to add the certificates as secrets.
  ##   # It should start with -----BEGIN CERTIFICATE----- or
  ##   # -----BEGIN RSA PRIVATE KEY-----
  ##   caCert:
  ##   # Create this apprepository in a custom namespace
  ##   namespace:
  ##   # In case of an OCI registry, specify the type
  ##   type: oci
  ##   # And specify the list of repositories
  ##   ociRepositories:
  ##     - nginx
  ##     - jenkins
  ##
  initialRepos:
    - name: bitnami
      url: https://charts.bitnami.com/bitnami
  ## @param apprepository.initialReposProxy [object] Proxy configuration to access chart repositories
  ##
  initialReposProxy:
    enabled: false
    httpProxy:
    httpsProxy:
    noProxy:
  ## @param apprepository.crontab Schedule for syncing App repositories (default to 10 minutes)
  ## e.g:
  ## crontab: "*/10 * * * *"
  ##
  crontab:
  ## @param apprepository.watchAllNamespaces Watch all namespaces to support separate AppRepositories per namespace
  ## Switch this off only if you require running multiple instances of Kubeapps in different namespaces
  ## without each instance watching AppRepositories of each other
  ##
  watchAllNamespaces: true
  ## @param apprepository.replicaCount Number of AppRepository Controller replicas to deploy
  ## Running a single controller replica to avoid sync job duplication
  ##
  replicaCount: 1
  ## AppRepository Controller containers' resource requests and limits
  ## ref: http://kubernetes.io/docs/user-guide/compute-resources/
  ## @param apprepository.resources.limits.cpu The CPU limits for the AppRepository Controller container
  ## @param apprepository.resources.limits.memory The memory limits for the AppRepository Controller container
  ## @param apprepository.resources.requests.cpu The requested CPU for the AppRepository Controller container
  ## @param apprepository.resources.requests.memory The requested memory for the AppRepository Controller container
  ##
  resources:
    limits:
      cpu: 250m
      memory: 128Mi
    requests:
      cpu: 25m
      memory: 32Mi
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param apprepository.podSecurityContext.enabled Enabled AppRepository Controller pods' Security Context
  ## @param apprepository.podSecurityContext.fsGroup Set AppRepository Controller pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroup: 1001
  ## Configure Container Security Context (only main container)
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param apprepository.containerSecurityContext.enabled Enabled AppRepository Controller containers' Security Context
  ## @param apprepository.containerSecurityContext.runAsUser Set AppRepository Controller container's Security Context runAsUser
  ## @param apprepository.containerSecurityContext.runAsNonRoot Set AppRepository Controller container's Security Context runAsNonRoot
  ##
  containerSecurityContext:
    enabled: true
    runAsUser: 1001
    runAsNonRoot: true
  ## @param apprepository.lifecycleHooks Custom lifecycle hooks for AppRepository Controller containers
  ##
  lifecycleHooks: {}
  ## @param apprepository.podLabels Extra labels for AppRepository Controller pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param apprepository.podAnnotations Annotations for AppRepository Controller pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param apprepository.podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param apprepository.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## nodeAffinityPreset Node affinity preset
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param apprepository.nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param apprepository.nodeAffinityPreset.key Node label key to match. Ignored if `affinity` is set
    ##
    key: ""
    ## @param apprepository.nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param apprepository.affinity Affinity for pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: apprepository.podAffinityPreset, apprepository.podAntiAffinityPreset, and apprepository.nodeAffinityPreset will be ignored when it's set
  ##
  affinity: {}
  ## @param apprepository.nodeSelector Node labels for pod assignment
  ## ref: https://kubernetes.io/docs/user-guide/node-selection/
  ##
  nodeSelector: {}
  ## @param apprepository.tolerations Tolerations for pod assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param apprepository.priorityClassName Priority class name for AppRepository Controller pods
  ##
  priorityClassName:
  ## @param apprepository.hostAliases Custom host aliases for AppRepository Controller pods
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []

## @section Kubeops parameters

## Kubeops parameters
##
kubeops:
  ## Bitnami Kubeops image
  ## ref: https://hub.docker.com/r/bitnami/kubeops/tags/
  ## @param kubeops.image.registry Kubeops image registry
  ## @param kubeops.image.repository Kubeops image repository
  ## @param kubeops.image.tag Kubeops image tag (immutable tags are recommended)
  ## @param kubeops.image.pullPolicy Kubeops image pull policy
  ## @param kubeops.image.pullSecrets Kubeops image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/kubeapps-kubeops
    tag: 2.3.3-scratch-r0
    ## Specify a imagePullPolicy
    ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
    ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param kubeops.namespaceHeaderName Additional header name for trusted namespaces
  ## e.g:
  ## namespaceHeaderName: X-Consumer-Groups
  ##
  namespaceHeaderName:
  ## @param kubeops.namespaceHeaderPattern Additional header pattern for trusted namespaces
  ## e.g:
  ## namespaceHeaderPattern: namespace:^([\w-]+):\w+$
  ##
  namespaceHeaderPattern:
  ## @param kubeops.qps Kubeops QPS (queries per second) rate
  ##
  qps:
  ## @param kubeops.burst Kubeops burst rate
  ##
  burst:
  ## @param kubeops.replicaCount Number of Kubeops replicas to deploy
  ##
  replicaCount: 2
  ## @param kubeops.terminationGracePeriodSeconds The grace time period for sig term
  ## ref: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#hook-handler-execution
  ##
  terminationGracePeriodSeconds: 300
  ## @param kubeops.extraEnvVars Array with extra environment variables to add to the Kubeops container
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param kubeops.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for the Kubeops container
  ##
  extraEnvVarsCM:
  ## @param kubeops.extraEnvVarsSecret Name of existing Secret containing extra env vars for the Kubeops container
  ##
  extraEnvVarsSecret:
  ## @param kubeops.containerPort Kubeops HTTP container port
  ##
  containerPort: 8080
  ## Kubeops containers' resource requests and limits
  ## ref: http://kubernetes.io/docs/user-guide/compute-resources/
  ## @param kubeops.resources.limits.cpu The CPU limits for the Kubeops container
  ## @param kubeops.resources.limits.memory The memory limits for the Kubeops container
  ## @param kubeops.resources.requests.cpu The requested CPU for the Kubeops container
  ## @param kubeops.resources.requests.memory The requested memory for the Kubeops container
  ##
  resources:
    limits:
      cpu: 250m
      memory: 256Mi
    requests:
      cpu: 25m
      memory: 32Mi
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param kubeops.podSecurityContext.enabled Enabled Kubeops pods' Security Context
  ## @param kubeops.podSecurityContext.fsGroup Set Kubeops pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroup: 1001
  ## Configure Container Security Context (only main container)
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param kubeops.containerSecurityContext.enabled Enabled Kubeops containers' Security Context
  ## @param kubeops.containerSecurityContext.runAsUser Set Kubeops container's Security Context runAsUser
  ## @param kubeops.containerSecurityContext.runAsNonRoot Set Kubeops container's Security Context runAsNonRoot
  ##
  containerSecurityContext:
    enabled: true
    runAsUser: 1001
    runAsNonRoot: true
  ## Configure extra options for Kubeops containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param kubeops.livenessProbe.enabled Enable livenessProbe
  ## @skip kubeops.livenessProbe.httpGet
  ## @param kubeops.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param kubeops.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param kubeops.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param kubeops.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param kubeops.livenessProbe.successThreshold Success threshold for livenessProbe
  ## Kubeops containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ##
  livenessProbe:
    enabled: true
    httpGet:
      path: /live
      port: 8080
    initialDelaySeconds: 60
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 6
    successThreshold: 1
  ## @param kubeops.readinessProbe.enabled Enable readinessProbe
  ## @skip kubeops.readinessProbe.httpGet
  ## @param kubeops.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param kubeops.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param kubeops.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param kubeops.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param kubeops.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    httpGet:
      path: /ready
      port: 8080
    initialDelaySeconds: 0
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 6
    successThreshold: 1
  ## @param kubeops.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param kubeops.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## @param kubeops.lifecycleHooks Custom lifecycle hooks for Kubeops containers
  ##
  lifecycleHooks: {}
  ## @param kubeops.podLabels Extra labels for Kubeops pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param kubeops.podAnnotations Annotations for Kubeops pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param kubeops.podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param kubeops.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## nodeAffinityPreset Node affinity preset
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param kubeops.nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param kubeops.nodeAffinityPreset.key Node label key to match. Ignored if `affinity` is set
    ##
    key: ""
    ## @param kubeops.nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param kubeops.affinity Affinity for pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: kubeops.podAffinityPreset, kubeops.podAntiAffinityPreset, and kubeops.nodeAffinityPreset will be ignored when it's set
  ##
  affinity: {}
  ## @param kubeops.nodeSelector Node labels for pod assignment
  ## ref: https://kubernetes.io/docs/user-guide/node-selection/
  ##
  nodeSelector: {}
  ## @param kubeops.tolerations Tolerations for pod assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param kubeops.priorityClassName Priority class name for Kubeops pods
  ##
  priorityClassName:
  ## @param kubeops.hostAliases Custom host aliases for Kubeops pods
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## Kubeops service parameters
  ##
  service:
    ## @param kubeops.service.port Kubeops service HTTP port
    ##
    port: 8080
    ## @param kubeops.service.annotations Additional custom annotations for Kubeops service
    ##
    annotations: {}

## @section Assetsvc parameters

## Assetsvc parameters
##
assetsvc:
  ## Bitnami Kubeapps Assetsvc image
  ## ref: https://hub.docker.com/r/bitnami/kubeapps-assetsvc/tags/
  ## @param assetsvc.image.registry Kubeapps Assetsvc image registry
  ## @param assetsvc.image.repository Kubeapps Assetsvc image repository
  ## @param assetsvc.image.tag Kubeapps Assetsvc image tag (immutable tags are recommended)
  ## @param assetsvc.image.pullPolicy Kubeapps Assetsvc image pull policy
  ## @param assetsvc.image.pullSecrets Kubeapps Assetsvc image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/kubeapps-assetsvc
    tag: 2.3.3-scratch-r0
    ## Specify a imagePullPolicy
    ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
    ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param assetsvc.replicaCount Number of Assetsvc replicas to deploy
  ##
  replicaCount: 2
  ## @param assetsvc.extraEnvVars Array with extra environment variables to add to the Assetsvc container
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param assetsvc.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for the Assetsvc container
  ##
  extraEnvVarsCM:
  ## @param assetsvc.extraEnvVarsSecret Name of existing Secret containing extra env vars for the Assetsvc container
  ##
  extraEnvVarsSecret:
  ## @param assetsvc.containerPort Assetsvc HTTP container port
  ##
  containerPort: 8080
  ## Assetsvc containers' resource requests and limits
  ## ref: http://kubernetes.io/docs/user-guide/compute-resources/
  ## @param assetsvc.resources.limits.cpu The CPU limits for the Assetsvc container
  ## @param assetsvc.resources.limits.memory The memory limits for the Assetsvc container
  ## @param assetsvc.resources.requests.cpu The requested CPU for the Assetsvc container
  ## @param assetsvc.resources.requests.memory The requested memory for the Assetsvc container
  ##
  resources:
    limits:
      cpu: 250m
      memory: 128Mi
    requests:
      cpu: 25m
      memory: 32Mi
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param assetsvc.podSecurityContext.enabled Enabled Assetsvc pods' Security Context
  ## @param assetsvc.podSecurityContext.fsGroup Set Assetsvc pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroup: 1001
  ## Configure Container Security Context (only main container)
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param assetsvc.containerSecurityContext.enabled Enabled Assetsvc containers' Security Context
  ## @param assetsvc.containerSecurityContext.runAsUser Set Assetsvc container's Security Context runAsUser
  ## @param assetsvc.containerSecurityContext.runAsNonRoot Set Assetsvc container's Security Context runAsNonRoot
  ##
  containerSecurityContext:
    enabled: true
    runAsUser: 1001
    runAsNonRoot: true
  ## Configure extra options for Assetsvc containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param assetsvc.livenessProbe.enabled Enable livenessProbe
  ## @skip assetsvc.livenessProbe.httpGet
  ## @param assetsvc.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param assetsvc.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param assetsvc.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param assetsvc.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param assetsvc.livenessProbe.successThreshold Success threshold for livenessProbe
  ## Assetsvc containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ##
  livenessProbe:
    enabled: true
    httpGet:
      path: /live
      port: 8080
    initialDelaySeconds: 60
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 6
    successThreshold: 1
  ## @param assetsvc.readinessProbe.enabled Enable readinessProbe
  ## @skip  assetsvc.readinessProbe.httpGet
  ## @param assetsvc.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param assetsvc.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param assetsvc.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param assetsvc.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param assetsvc.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    httpGet:
      path: /ready
      port: 8080
    initialDelaySeconds: 0
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 6
    successThreshold: 1
  ## @param assetsvc.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param assetsvc.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## @param assetsvc.lifecycleHooks Custom lifecycle hooks for Assetsvc containers
  ##
  lifecycleHooks: {}
  ## @param assetsvc.podLabels Extra labels for Assetsvc pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param assetsvc.podAnnotations Annotations for Assetsvc pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param assetsvc.podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param assetsvc.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## nodeAffinityPreset Node affinity preset
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param assetsvc.nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param assetsvc.nodeAffinityPreset.key Node label key to match. Ignored if `affinity` is set
    ##
    key: ""
    ## @param assetsvc.nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param assetsvc.affinity Affinity for pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: assetsvc.podAffinityPreset, assetsvc.podAntiAffinityPreset, and assetsvc.nodeAffinityPreset will be ignored when it's set
  ##
  affinity: {}
  ## @param assetsvc.nodeSelector Node labels for pod assignment
  ## ref: https://kubernetes.io/docs/user-guide/node-selection/
  ##
  nodeSelector: {}
  ## @param assetsvc.tolerations Tolerations for pod assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param assetsvc.priorityClassName Priority class name for Assetsvc pods
  ##
  priorityClassName:
  ## @param assetsvc.hostAliases Custom host aliases for Assetsvc pods
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## Assetsvc service parameters
  ##
  service:
    ## @param assetsvc.service.port Assetsvc service HTTP port
    ##
    port: 8080
    ## @param assetsvc.service.annotations Additional custom annotations for Assetsvc service
    ##
    annotations: {}

## @section Auth Proxy parameters

## Auth Proxy configuration for OIDC support
## ref: https://github.com/kubeapps/kubeapps/blob/master/docs/user/using-an-OIDC-provider.md
##
authProxy:
  ## @param authProxy.enabled Specifies whether Kubeapps should configure OAuth login/logout
  ##
  enabled: false
  ## Bitnami OAuth2 Proxy image
  ## ref: https://hub.docker.com/r/bitnami/oauth2-proxy/tags/
  ## @param authProxy.image.registry OAuth2 Proxy image registry
  ## @param authProxy.image.repository OAuth2 Proxy image repository
  ## @param authProxy.image.tag OAuth2 Proxy image tag (immutable tags are recommended)
  ## @param authProxy.image.pullPolicy OAuth2 Proxy image pull policy
  ## @param authProxy.image.pullSecrets OAuth2 Proxy image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/oauth2-proxy
    tag: 7.1.3-debian-10-r63
    ## Specify a imagePullPolicy
    ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
    ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param authProxy.external Use an external Auth Proxy instead of deploying its own one
  ##
  external: false
  ## @param authProxy.oauthLoginURI OAuth Login URI to which the Kubeapps frontend redirects for authn
  ## @param authProxy.oauthLogoutURI OAuth Logout URI to which the Kubeapps frontend redirects for authn
  ##
  oauthLoginURI: /oauth2/start
  oauthLogoutURI: /oauth2/sign_out
  ## @param authProxy.skipKubeappsLoginPage Skip the Kubeapps login page when using OIDC and directly redirect to the IdP
  ##
  skipKubeappsLoginPage: false
  ## @param authProxy.provider OAuth provider
  ## @param authProxy.clientID OAuth Client ID
  ## @param authProxy.clientSecret OAuth Client secret
  ## NOTE: Mandatory parameters for the internal auth-proxy
  ##
  provider: ""
  clientID: ""
  clientSecret: ""
  ## @param authProxy.cookieSecret Secret used by oauth2-proxy to encrypt any credentials
  ## NOTE: It must be a particular number of bytes. It's recommended using the following
  ## script to generate a cookieSecret:
  ##   python -c 'import os,base64; print base64.urlsafe_b64encode(os.urandom(16))'
  ## ref: https://oauth2-proxy.github.io/oauth2-proxy/docs/configuration/overview#generating-a-cookie-secret
  ##
  cookieSecret: ""
  ## @param authProxy.cookieRefresh Duration after which to refresh the cookie
  ##
  cookieRefresh: 2m
  ## @param authProxy.scope OAuth scope specification
  ##
  scope: "openid email groups"
  ## @param authProxy.emailDomain Allowed email domains
  ## Use "example.com" to restrict logins to emails from example.com
  ##
  emailDomain: "*"
  ## @param authProxy.additionalFlags Additional flags for oauth2-proxy
  ## ref: https://oauth2-proxy.github.io/oauth2-proxy/docs/configuration/overview
  ## e.g:
  ## additionalFlags:
  ##   - --ssl-insecure-skip-verify
  ##   - --cookie-secure=false
  ##   - --oidc-issuer-url=https://accounts.google.com # Only needed if provider is oidc
  ##
  additionalFlags: []
  ## @param authProxy.containerPort Auth Proxy HTTP container port
  ##
  containerPort: 3000
  ## Configure Container Security Context for Auth Proxy
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param authProxy.containerSecurityContext.enabled Enabled Auth Proxy containers' Security Context
  ## @param authProxy.containerSecurityContext.runAsUser Set Auth Proxy container's Security Context runAsUser
  ## @param authProxy.containerSecurityContext.runAsNonRoot Set Auth Proxy container's Security Context runAsNonRoot
  ##
  containerSecurityContext:
    enabled: true
    runAsUser: 1001
    runAsNonRoot: true
  ## OAuth2 Proxy containers' resource requests and limits
  ## ref: http://kubernetes.io/docs/user-guide/compute-resources/
  ## @param authProxy.resources.limits.cpu The CPU limits for the OAuth2 Proxy container
  ## @param authProxy.resources.limits.memory The memory limits for the OAuth2 Proxy container
  ## @param authProxy.resources.requests.cpu The requested CPU for the OAuth2 Proxy container
  ## @param authProxy.resources.requests.memory The requested memory for the OAuth2 Proxy container
  ##
  resources:
    limits:
      cpu: 250m
      memory: 128Mi
    requests:
      cpu: 25m
      memory: 32Mi

## @section Pinniped Proxy parameters

## Pinniped Proxy configuration for converting user OIDC tokens to k8s client authorization certs
## NOTE: This component is alpha functionality in Kubeapps until we complete testing and documentation.
##
pinnipedProxy:
  ## @param pinnipedProxy.enabled Specifies whether Kubeapps should configure Pinniped Proxy
  ##
  enabled: false
  ## Bitnami Pinniped Proxy image
  ## ref: https://hub.docker.com/r/bitnami/kubeapps-pinniped-proxy/tags/
  ## @param pinnipedProxy.image.registry Pinniped Proxy image registry
  ## @param pinnipedProxy.image.repository Pinniped Proxy image repository
  ## @param pinnipedProxy.image.tag Pinniped Proxy image tag (immutable tags are recommended)
  ## @param pinnipedProxy.image.pullPolicy Pinniped Proxy image pull policy
  ## @param pinnipedProxy.image.pullSecrets Pinniped Proxy image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/kubeapps-pinniped-proxy
    tag: 2.3.3-debian-10-r2
    ## Specify a imagePullPolicy
    ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
    ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param pinnipedProxy.defaultPinnipedNamespace Specify the (default) namespace in which pinniped concierge is installed
  ##
  defaultPinnipedNamespace: pinniped-concierge
  ## @param pinnipedProxy.defaultAuthenticatorType Specify the (default) authenticator type
  ##
  defaultAuthenticatorType: JWTAuthenticator
  ## @param pinnipedProxy.defaultAuthenticatorName Specify the (default) authenticator name
  ##
  defaultAuthenticatorName: jwt-authenticator
  ## @param pinnipedProxy.defaultPinnipedAPISuffix Specify the (default) API suffix
  ##
  defaultPinnipedAPISuffix: pinniped.dev
  ## @param pinnipedProxy.containerPort Kubeops HTTP container port
  ##
  containerPort: 3333
  ## Configure Container Security Context for Pinniped Proxy
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param pinnipedProxy.containerSecurityContext.enabled Enabled Pinniped Proxy containers' Security Context
  ## @param pinnipedProxy.containerSecurityContext.runAsUser Set Pinniped Proxy container's Security Context runAsUser
  ## @param pinnipedProxy.containerSecurityContext.runAsNonRoot Set Pinniped Proxy container's Security Context runAsNonRoot
  ##
  containerSecurityContext:
    enabled: true
    runAsUser: 1001
    runAsNonRoot: true
  ## Pinniped Proxy containers' resource requests and limits
  ## ref: http://kubernetes.io/docs/user-guide/compute-resources/
  ## @param pinnipedProxy.resources.limits.cpu The CPU limits for the Pinniped Proxy container
  ## @param pinnipedProxy.resources.limits.memory The memory limits for the Pinniped Proxy container
  ## @param pinnipedProxy.resources.requests.cpu The requested CPU for the Pinniped Proxy container
  ## @param pinnipedProxy.resources.requests.memory The requested memory for the Pinniped Proxy container
  ##
  resources:
    limits:
      cpu: 250m
      memory: 128Mi
    requests:
      cpu: 25m
      memory: 32Mi

## @section Other Parameters

## @param allowNamespaceDiscovery Allow users to discover available namespaces (only the ones they have access)
## NOTE: When set to true, Kubeapps creates a ClusterRole to be able to list namespaces.
##
allowNamespaceDiscovery: true
## @param clusters [array] List of clusters that Kubeapps can target for deployments
## When populated with a single cluster (as it is by default), Kubeapps will not allow users to
## change the target cluster. When populated with multiple clusters, Kubeapps will present the clusters to
## the user as potential targets for install or browsing.
## - Note that you can define a single cluster without an apiServiceURL and the chart will assume this is
##   the name you are assigning to the cluster on which Kubeapps is itself installed. Specifying more than
##   one cluster without an apiServiceURL will cause the chart display an error.
## - The base64-encoded certificateAuthorityData can be obtained from the additional cluster's kube config
##   file, for example, to get the ca data for the 0th cluster in your config (adjust the index 0 as necessary):
##   kubectl --kubeconfig ~/.kube/kind-config-kubeapps-additional config view --raw -o jsonpath='{.clusters[0].cluster.certificate-authority-data}'
## - serviceToken is an optional token configured to allow LIST namespaces and package manifests (operators) only on the additional cluster
##   so that the UI can present a list of (only) those namespaces to which the user has access and the available operators.
## - isKubeappsCluster is an optional parameter that allows defining the cluster in which Kubeapps is installed;
##   this param is useful when every cluster is using an apiServiceURL (e.g., when using the Pinniped Impersonation Proxy)
##   as the chart cannot infer the cluster on which Kubeapps is installed in that case.
## e.g.:
## clusters:
## - name: default
##   domain: cluster.local
## - name: second-cluster
##   domain: cluster.local
##   apiServiceURL: https://second-cluster:6443
##   certificateAuthorityData: LS0tLS1CRUdJ...
##   serviceToken: ...
##   isKubeappsCluster: true
##
clusters:
  - name: default
    domain: cluster.local
## @param featureFlags [object] Feature flags (used to switch on development features)
##
featureFlags:
  invalidateCache: true
## RBAC configuration
##
rbac:
  ## @param rbac.create Specifies whether RBAC resources should be created
  ##
  create: true
## Image used for the tests
## Bitnami NGINX image
## ref: https://hub.docker.com/r/bitnami/nginx/tags/
## @param testImage.registry NGINX image registry
## @param testImage.repository NGINX image repository
## @param testImage.tag NGINX image tag (immutable tags are recommended)
## @param testImage.pullPolicy NGINX image pull policy
## @param testImage.pullSecrets NGINX image pull secrets
##
testImage:
  registry: docker.io
  repository: bitnami/nginx
  tag: 1.21.1-debian-10-r4
  ## Specify a imagePullPolicy
  ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
  ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## e.g:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []

## @section Database Parameters

## PostgreSQL chart configuration
## ref: https://github.com/bitnami/charts/blob/master/bitnami/postgresql/values.yaml
##
postgresql:
  ## @param postgresql.enabled Deploy a PostgreSQL server to satisfy the applications database requirements
  ##
  enabled: true
  ## @param postgresql.replication.enabled Enable replication for high availability
  ##
  replication:
    enabled: true
  ## @param postgresql.postgresqlDatabase Database name for Kubeapps to be created on the first run
  ##
  postgresqlDatabase: assets
  ## @param postgresql.postgresqlPassword Password for 'postgres' user
  ## ref: https://github.com/bitnami/bitnami-docker-postgresql/blob/master/README.md#setting-the-root-password-on-first-run
  ##
  postgresqlPassword: ""
  ## PostgreSQL Persistence parameters
  ## ref: http://kubernetes.io/docs/user-guide/persistent-volumes/
  ## @param postgresql.persistence.enabled Enable persistence on PostgreSQL using PVC(s)
  ## @param postgresql.persistence.size Persistent Volume size
  ##
  persistence:
    enabled: false
    size: 8Gi
  ## @param postgresql.securityContext.enabled Enabled PostgreSQL replicas pods' Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
  ##
  securityContext:
    enabled: false
  ## PostreSQL containers' resource requests and limits
  ## ref: http://kubernetes.io/docs/user-guide/compute-resources/
  ## @param postgresql.resources.limits The resources limits for the PostreSQL container
  ## @param postgresql.resources.requests.cpu The requested CPU for the PostreSQL container
  ## @param postgresql.resources.requests.memory The requested memory for the PostreSQL container
  ##
  resources:
    limits: {}
    requests:
      memory: 256Mi
      cpu: 250m