charts/bitnami/nginx

Bitnami package for NGINX Open Source

NGINX Open Source is a web server that can be also used as a reverse proxy, load balancer, and HTTP cache. Recommended for high-demanding sites due to its ability to provide faster content.

Overview of NGINX Open Source

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://registry-1.docker.io/bitnamicharts/nginx

Looking to use NGINX Open Source in production? Try VMware Tanzu Application Catalog, the commercial edition of the Bitnami catalog.

Introduction

Bitnami charts for Helm are carefully engineered, actively maintained and are the quickest and easiest way to deploy containers on a Kubernetes cluster that are ready to handle production workloads.

This chart bootstraps a NGINX Open Source deployment on a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/nginx

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

These commands deploy NGINX Open Source on the Kubernetes cluster in the default configuration.

Tip

: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcesPreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Prometheus metrics

This chart can be integrated with Prometheus by setting metrics.enabled to true. This will deploy a sidecar container with nginx-prometheus-exporter in all pods and will expose it via the Nginx service. This service will be have the necessary annotations to be automatically scraped by Prometheus.

Prometheus requirements

It is necessary to have a working installation of Prometheus or Prometheus Operator for the integration to work. Install the Bitnami Prometheus helm chart or the Bitnami Kube Prometheus helm chart to easily have a working Prometheus in your cluster.

Integration with Prometheus Operator

The chart can deploy ServiceMonitor objects for integration with Prometheus Operator installations. To do so, set the value metrics.serviceMonitor.enabled=true. Ensure that the Prometheus Operator CustomResourceDefinitions are installed in the cluster or it will fail with the following error:

no matches for kind "ServiceMonitor" in version "monitoring.coreos.com/v1"

Install the Bitnami Kube Prometheus helm chart for having the necessary CRDs and the Prometheus Operator.

Securing traffic using TLS

Nginx can encrypt communications by setting tls.enabled=true. The chart allows two configuration options:

• Provide your own secret using the tls.certificatesSecret value. Also set the correct name of the certificate files using the tls.certFilename, tls.certKeyFilename and tls.certCAFilename values.
• Have the chart auto-generate the certificates using tls.autoGenerated=true.

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Use a different NGINX version

To modify the application version used in this chart, specify a different version of the image using the image.tag parameter and/or a different repository using the image.repository parameter.

Backup and restore

To back up and restore Helm chart deployments on Kubernetes, you need to back up the persistent volumes from the source deployment and attach them to a new deployment using Velero, a Kubernetes backup/restore tool. Find the instructions for using Velero in this guide.

Deploying your custom web application

The NGINX chart allows you to deploy a custom web application using one of the following methods:

• Cloning from a git repository: Set cloneStaticSiteFromGit.enabled to true and set the repository and branch using the cloneStaticSiteFromGit.repository and cloneStaticSiteFromGit.branch parameters. A sidecar will also pull the latest changes in an interval set by cloneStaticSitesFromGit.interval.
• Providing a ConfigMap: Set the staticSiteConfigmap value to mount a ConfigMap in the NGINX html folder.
• Using an existing PVC: Set the staticSitePVC value to mount an PersistentVolumeClaim with the static site content.

You can deploy a example web application using git deploying the chart with the following parameters:

cloneStaticSiteFromGit.enabled=true
cloneStaticSiteFromGit.repository=https://github.com/mdn/beginner-html-site-styled.git
cloneStaticSiteFromGit.branch=master

Providing a custom server block

This helm chart supports using custom custom server block for NGINX to use.

You can use the serverBlock or streamServerBlock value to provide a custom server block for NGINX to use. To do this, create a values files with your server block and install the chart using it:

serverBlock: |-
  server {
    listen 0.0.0.0:8080;
    location / {
      return 200 "hello!";
    }
  }

Warning: The above example is not compatible with enabling Prometheus metrics since it affects the /status endpoint.

In addition, you can also set an external ConfigMap with the configuration file. This is done by setting the existingServerBlockConfigmap parameter. Note that this will override the previous option.

Adding extra environment variables

In case you want to add extra environment variables (useful for advanced operations like custom init scripts), you can use the extraEnvVars property.

extraEnvVars:
  - name: LOG_LEVEL
    value: error

Alternatively, you can use a ConfigMap or a Secret with the environment variables. To do so, use the extraEnvVarsCM or the extraEnvVarsSecret values.

Setting Pod's affinity

This chart allows you to set your custom affinity using the affinity parameter. Find more information about Pod's affinity in the kubernetes documentation.

As an alternative, you can use of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the podAffinityPreset, podAntiAffinityPreset, or nodeAffinityPreset parameters.

Deploying extra resources

There are cases where you may want to deploy extra objects, such a ConfigMap containing your app's configuration or some extra deployment with a micro service used by your app. For covering this case, the chart allows adding the full specification of other objects using the extraDeploy parameter.

Ingress

This chart provides support for ingress resources. If you have an ingress controller installed on your cluster, such as nginx-ingress-controller or contour you can utilize the ingress controller to serve your application.

To enable ingress integration, please set ingress.enabled to true.

Hosts

Most likely you will only want to have one hostname that maps to this NGINX installation. If that's your case, the property ingress.hostname will set it. However, it is possible to have more than one host. To facilitate this, the ingress.extraHosts object can be specified as an array. You can also use ingress.extraTLS to add the TLS configuration for extra hosts.

For each host indicated at ingress.extraHosts, please indicate a name, path, and any annotations that you may want the ingress controller to know about.

For annotations, please see this document. Not all annotations are supported by all ingress controllers, but this document does a good job of indicating which annotation is supported by many popular ingress controllers.

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.security.allowInsecureImages	Allows skipping image verification	false
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common parameters

Name	Description	Value
nameOverride	String to partially override nginx.fullname template (will maintain the release name)	""
fullnameOverride	String to fully override nginx.fullname template	""
namespaceOverride	String to fully override common.names.namespace	""
kubeVersion	Force target Kubernetes version (using Helm capabilities if not set)	""
clusterDomain	Kubernetes Cluster Domain	cluster.local
extraDeploy	Extra objects to deploy (value evaluated as a template)	[]
commonLabels	Add labels to all the deployed resources	{}
commonAnnotations	Add annotations to all the deployed resources	{}
diagnosticMode.enabled	Enable diagnostic mode (all probes will be disabled and the command will be overridden)	false
diagnosticMode.command	Command to override all containers in the the deployment(s)/statefulset(s)	["sleep"]
diagnosticMode.args	Args to override all containers in the the deployment(s)/statefulset(s)	["infinity"]

NGINX parameters

Name	Description	Value
image.registry	NGINX image registry	REGISTRY_NAME
image.repository	NGINX image repository	REPOSITORY_NAME/nginx
image.digest	NGINX image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag	""
image.pullPolicy	NGINX image pull policy	IfNotPresent
image.pullSecrets	Specify docker-registry secret names as an array	[]
image.debug	Set to true if you would like to see extra information on logs	false
enableDefaultInitContainers	If set to false, disable all init containers except user-defined at initContainer.	true
automountServiceAccountToken	Mount Service Account token in pod	false
hostAliases	Deployment pod host aliases	[]
command	Override default container command (useful when using custom images)	[]
args	Override default container args (useful when using custom images)	[]
extraEnvVars	Extra environment variables to be set on NGINX containers	[]
extraEnvVarsCM	ConfigMap with extra environment variables	""
extraEnvVarsSecret	Secret with extra environment variables	""

NGINX deployment parameters

Name	Description	Value
replicaCount	Number of NGINX replicas to deploy	1
revisionHistoryLimit	The number of old history to retain to allow rollback	10
updateStrategy.type	NGINX deployment strategy type	RollingUpdate
updateStrategy.rollingUpdate	NGINX deployment rolling update configuration parameters	{}
podLabels	Additional labels for NGINX pods	{}
podAnnotations	Annotations for NGINX pods	{}
podAffinityPreset	Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
podAntiAffinityPreset	Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	soft
nodeAffinityPreset.type	Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
nodeAffinityPreset.key	Node label key to match Ignored if affinity is set.	""
nodeAffinityPreset.values	Node label values to match. Ignored if affinity is set.	[]
affinity	Affinity for pod assignment	{}
hostNetwork	Specify if host network should be enabled for NGINX pod	false
hostIPC	Specify if host IPC should be enabled for NGINX pod	false
dnsPolicy	Specifies the DNS policy for the NGINX pod	""
dnsConfig	Allows users more control on the DNS settings for a Pod. Required if dnsPolicy is set to None	{}
nodeSelector	Node labels for pod assignment. Evaluated as a template.	{}
tolerations	Tolerations for pod assignment. Evaluated as a template.	[]
priorityClassName	NGINX pods' priorityClassName	""
schedulerName	Name of the k8s scheduler (other than default)	""
terminationGracePeriodSeconds	In seconds, time the given to the NGINX pod needs to terminate gracefully	""
topologySpreadConstraints	Topology Spread Constraints for pod assignment	[]
tls.enabled	Enable TLS transport	true
tls.autoGenerated	Auto-generate self-signed certificates	true
tls.existingSecret	Name of a secret containing the certificates	""
tls.certFilename	Path of the certificate file when mounted as a secret	tls.crt
tls.certKeyFilename	Path of the certificate key file when mounted as a secret	tls.key
tls.certCAFilename	Path of the certificate CA file when mounted as a secret	ca.crt
tls.cert	Content of the certificate to be added to the secret	""
tls.key	Content of the certificate key to be added to the secret	""
tls.ca	Content of the certificate CA to be added to the secret	""
podSecurityContext.enabled	Enabled NGINX pods' Security Context	true
podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
podSecurityContext.fsGroup	Set NGINX pod's Security Context fsGroup	1001
podSecurityContext.sysctls	sysctl settings of the NGINX pods	[]
containerSecurityContext.enabled	Enabled containers' Security Context	true
containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
containerSecurityContext.runAsUser	Set containers' Security Context runAsUser	1001
containerSecurityContext.runAsGroup	Set containers' Security Context runAsGroup	1001
containerSecurityContext.runAsNonRoot	Set container's Security Context runAsNonRoot	true
containerSecurityContext.privileged	Set container's Security Context privileged	false
containerSecurityContext.readOnlyRootFilesystem	Set container's Security Context readOnlyRootFilesystem	true
containerSecurityContext.allowPrivilegeEscalation	Set container's Security Context allowPrivilegeEscalation	false
containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
containerSecurityContext.seccompProfile.type	Set container's Security Context seccomp profile	RuntimeDefault
containerPorts.http	Sets http port inside NGINX container	8080
containerPorts.https	Sets https port inside NGINX container	8443
extraContainerPorts	Array of additional container ports for the Nginx container	[]
resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).	nano
resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
lifecycleHooks	Optional lifecycleHooks for the NGINX container	{}
startupProbe.enabled	Enable startupProbe	false
startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
startupProbe.periodSeconds	Period seconds for startupProbe	10
startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
startupProbe.failureThreshold	Failure threshold for startupProbe	6
startupProbe.successThreshold	Success threshold for startupProbe	1
livenessProbe.enabled	Enable livenessProbe	true
livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
livenessProbe.periodSeconds	Period seconds for livenessProbe	10
livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
livenessProbe.successThreshold	Success threshold for livenessProbe	1
readinessProbe.enabled	Enable readinessProbe	true
readinessProbe.path	Request path for livenessProbe	/
readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
readinessProbe.periodSeconds	Period seconds for readinessProbe	5
readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	3
readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
readinessProbe.successThreshold	Success threshold for readinessProbe	1
customStartupProbe	Custom liveness probe for the Web component	{}
customLivenessProbe	Override default liveness probe	{}
customReadinessProbe	Override default readiness probe	{}
autoscaling.enabled	Enable autoscaling for NGINX deployment	false
autoscaling.minReplicas	Minimum number of replicas to scale back	""
autoscaling.maxReplicas	Maximum number of replicas to scale out	""
autoscaling.targetCPU	Target CPU utilization percentage	""
autoscaling.targetMemory	Target Memory utilization percentage	""
extraVolumes	Array to add extra volumes	[]
extraVolumeMounts	Array to add extra mount	[]
serviceAccount.create	Enable creation of ServiceAccount for nginx pod	true
serviceAccount.name	The name of the ServiceAccount to use.	""
serviceAccount.annotations	Annotations for service account. Evaluated as a template.	{}
serviceAccount.automountServiceAccountToken	Auto-mount the service account token in the pod	false
sidecars	Sidecar parameters	[]
sidecarSingleProcessNamespace	Enable sharing the process namespace with sidecars	false
initContainers	Extra init containers	[]
pdb.create	Created a PodDisruptionBudget	true
pdb.minAvailable	Min number of pods that must still be available after the eviction.	""
pdb.maxUnavailable	Max number of pods that can be unavailable after the eviction.	""

Custom NGINX application parameters

Name	Description	Value
cloneStaticSiteFromGit.enabled	Get the server static content from a Git repository	false
cloneStaticSiteFromGit.image.registry	Git image registry	REGISTRY_NAME
cloneStaticSiteFromGit.image.repository	Git image repository	REPOSITORY_NAME/git
cloneStaticSiteFromGit.image.digest	Git image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag	""
cloneStaticSiteFromGit.image.pullPolicy	Git image pull policy	IfNotPresent
cloneStaticSiteFromGit.image.pullSecrets	Specify docker-registry secret names as an array	[]
cloneStaticSiteFromGit.repository	Git Repository to clone static content from	""
cloneStaticSiteFromGit.branch	Git branch to checkout	""
cloneStaticSiteFromGit.interval	Interval for sidecar container pull from the Git repository	60
cloneStaticSiteFromGit.gitClone.command	Override default container command for git-clone-repository	[]
cloneStaticSiteFromGit.gitClone.args	Override default container args for git-clone-repository	[]
cloneStaticSiteFromGit.gitSync.command	Override default container command for git-repo-syncer	[]
cloneStaticSiteFromGit.gitSync.args	Override default container args for git-repo-syncer	[]
cloneStaticSiteFromGit.gitSync.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if cloneStaticSiteFromGit.gitSync.resources is set (cloneStaticSiteFromGit.gitSync.resources is recommended for production).	nano
cloneStaticSiteFromGit.gitSync.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
cloneStaticSiteFromGit.extraEnvVars	Additional environment variables to set for the in the containers that clone static site from git	[]
cloneStaticSiteFromGit.extraEnvVarsSecret	Secret with extra environment variables	""
cloneStaticSiteFromGit.extraVolumeMounts	Add extra volume mounts for the Git containers	[]
serverBlock	Custom server block to be added to NGINX configuration	""
streamServerBlock	Custom stream server block to be added to NGINX configuration	""
existingServerBlockConfigmap	ConfigMap with custom server block to be added to NGINX configuration	""
existingStreamServerBlockConfigmap	ConfigMap with custom stream server block to be added to NGINX configuration	""
staticSiteConfigmap	Name of existing ConfigMap with the server static site content	""
staticSitePVC	Name of existing PVC with the server static site content	""

Traffic Exposure parameters

Name	Description	Value
service.type	Service type	LoadBalancer
service.ports.http	Service HTTP port	80
service.ports.https	Service HTTPS port	443
service.nodePorts	Specify the nodePort(s) value(s) for the LoadBalancer and NodePort service types.	{}
service.targetPort	Target port reference value for the Loadbalancer service types can be specified explicitly.	{}
service.clusterIP	NGINX service Cluster IP	""
service.loadBalancerIP	LoadBalancer service IP address	""
service.loadBalancerSourceRanges	NGINX service Load Balancer sources	[]
service.loadBalancerClass	service Load Balancer class if service type is LoadBalancer (optional, cloud specific)	""
service.extraPorts	Extra ports to expose (normally used with the sidecar value)	[]
service.sessionAffinity	Session Affinity for Kubernetes service, can be "None" or "ClientIP"	None
service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
service.annotations	Service annotations	{}
service.externalTrafficPolicy	Enable client source IP preservation	Cluster
networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
networkPolicy.allowExternal	Don't require server label for connections	true
networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy (ignored if allowExternalEgress=true)	[]
networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
ingress.enabled	Set to true to enable ingress record generation	false
ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
ingress.pathType	Ingress path type	ImplementationSpecific
ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
ingress.hostname	Default host for the ingress resource	nginx.local
ingress.path	The Path to Nginx. You may need to set this to '/*' in order to use this with ALB ingress controllers.	/
ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
ingress.ingressClassName	Set the ingerssClassName on the ingress record for k8s 1.18+	""
ingress.tls	Create TLS Secret	false
ingress.tlsWwwPrefix	Adds www subdomain to default cert	false
ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
ingress.extraPaths	Any additional arbitrary paths that may need to be added to the ingress under the main host.	[]
ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
ingress.secrets	If you're providing your own certificates, please use this to add the certificates as secrets	[]
ingress.extraRules	The list of additional rules to be added to this ingress record. Evaluated as a template	[]
healthIngress.enabled	Set to true to enable health ingress record generation	false
healthIngress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
healthIngress.pathType	Ingress path type	ImplementationSpecific
healthIngress.hostname	When the health ingress is enabled, a host pointing to this will be created	example.local
healthIngress.path	Default path for the ingress record	/
healthIngress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
healthIngress.tls	Enable TLS configuration for the hostname defined at healthIngress.hostname parameter	false
healthIngress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
healthIngress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
healthIngress.extraTls	TLS configuration for additional hostnames to be covered	[]
healthIngress.secrets	TLS Secret configuration	[]
healthIngress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
healthIngress.extraRules	The list of additional rules to be added to this ingress record. Evaluated as a template	[]

Metrics parameters

Name	Description	Value
metrics.enabled	Start a Prometheus exporter sidecar container	false
metrics.image.registry	NGINX Prometheus exporter image registry	REGISTRY_NAME
metrics.image.repository	NGINX Prometheus exporter image repository	REPOSITORY_NAME/nginx-exporter
metrics.image.digest	NGINX Prometheus exporter image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag	""
metrics.image.pullPolicy	NGINX Prometheus exporter image pull policy	IfNotPresent
metrics.image.pullSecrets	Specify docker-registry secret names as an array	[]
metrics.port	NGINX Container Status Port scraped by Prometheus Exporter	""
metrics.extraArgs	Extra arguments for Prometheus exporter	[]
metrics.containerPorts.metrics	Prometheus exporter container port	9113
metrics.podAnnotations	Additional annotations for NGINX Prometheus exporter pod(s)	{}
metrics.securityContext.enabled	Enabled NGINX Exporter containers' Security Context	false
metrics.securityContext.seLinuxOptions	Set SELinux options in container	{}
metrics.securityContext.runAsUser	Set NGINX Exporter container's Security Context runAsUser	1001
metrics.service.port	NGINX Prometheus exporter service port	9113
metrics.service.annotations	Annotations for the Prometheus exporter service	{}
metrics.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if metrics.resources is set (metrics.resources is recommended for production).	nano
metrics.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
metrics.serviceMonitor.enabled	Creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""
metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
metrics.serviceMonitor.labels	Additional labels that can be used so PodMonitor will be discovered by Prometheus	{}
metrics.serviceMonitor.relabelings	RelabelConfigs to apply to samples before scraping	[]
metrics.serviceMonitor.metricRelabelings	MetricRelabelConfigs to apply to samples before ingestion	[]
metrics.serviceMonitor.honorLabels	honorLabels chooses the metric's labels on collisions with target labels	false
metrics.prometheusRule.enabled	if true, creates a Prometheus Operator PrometheusRule (also requires metrics.enabled to be true and metrics.prometheusRule.rules)	false
metrics.prometheusRule.namespace	Namespace for the PrometheusRule Resource (defaults to the Release Namespace)	""
metrics.prometheusRule.additionalLabels	Additional labels that can be used so PrometheusRule will be discovered by Prometheus	{}
metrics.prometheusRule.rules	Prometheus Rule definitions	[]

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release \
  --set imagePullPolicy=Always \
    oci://REGISTRY_NAME/REPOSITORY_NAME/nginx

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command sets the imagePullPolicy to Always.

Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/nginx

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami's Helm charts in this troubleshooting guide.

Upgrading

To 19.0.0

The module ngx_http_dav_module, WebDAV protocol, has been converted into a dynamic module under the /opt/bitnami/nginx/modules directory. It is necessary to include the directive load_module /opt/bitnami/nginx/modules/ngx_http_dav_module.so; to enable its functionality.

To 18.3.0

This version introduces image verification for security purposes. To disable it, set global.security.allowInsecureImages to true. More details at GitHub issue.

To 16.0.0

This major bump changes the following security defaults:

• runAsGroup is changed from 0 to 1001
• readOnlyRootFilesystem is set to true
• resourcesPreset is changed from none to the minimum size working in our test suites (NOTE: resourcesPreset is not meant for production usage, but resources adapted to your use case).
• global.compatibility.openshift.adaptSecurityContext is changed from disabled to auto.

This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.

To 11.0.0

This major release renames several values in this chart and adds missing features, in order to be aligned with the rest of the assets in the Bitnami charts repository.

Affected values:

• service.port was renamed as service.ports.http.
• service.httpsPort was deprecated. We recommend using service.ports.https.
• serviceAccount.autoMount was renamed as serviceAccount.automountServiceAccountToken
• metrics.serviceMonitor.additionalLabels was renamed as metrics.serviceMonitor.labels

To 10.0.0

This major release no longer uses the bitnami/nginx-ldap-auth-daemon container as a dependency since its upstream project is not actively maintained.

2022-04-12 edit:

Bitnami's reference implementation.

On 9 April 2022, security vulnerabilities in the NGINX LDAP reference implementation were publicly shared. Although the deprecation of this container from the Bitnami catalog was not related to this security issue, here you can find more information from the Bitnami security team.

To 8.0.0

On November 13, 2020, Helm v2 support was formally finished, this major version is the result of the required changes applied to the Helm Chart to be able to incorporate the different features added in Helm v3 and to be consistent with the Helm project itself regarding the Helm v2 EOL.

What changes were introduced in this major version?

• Previous versions of this Helm Chart use apiVersion: v1 (installable by both Helm 2 and 3), this Helm Chart was updated to apiVersion: v2 (installable by Helm 3 only). Here you can find more information about the apiVersion field.
• Move dependency information from the requirements.yaml to the Chart.yaml
• After running helm dependency update, a Chart.lock file is generated containing the same structure used in the previous requirements.lock
• The different fields present in the Chart.yaml file has been ordered alphabetically in a homogeneous way for all the Bitnami Helm Charts

Considerations when upgrading to this version

• If you want to upgrade to this version from a previous one installed with Helm v3, you shouldn't face any issues
• If you want to upgrade to this version using Helm v2, this scenario is not supported as this version doesn't support Helm v2 anymore
• If you installed the previous version with Helm v2 and wants to upgrade to this version with Helm v3, please refer to the official Helm documentation about migrating from Helm v2 to v3

Useful links

• https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-resolve-helm2-helm3-post-migration-issues-index.html
• https://helm.sh/docs/topics/v2_v3_migration/
• https://helm.sh/blog/migrate-from-helm-v2-to-helm-v3/

To 7.0.0

• This version also introduces bitnami/common, a library chart as a dependency. More documentation about this new utility could be found here. Please, make sure that you have updated the chart dependencies before executing any upgrade.
• Ingress configuration was also adapted to follow the Helm charts best practices.

Note: There is no backwards compatibility due to the above mentioned changes. It's necessary to install a new release of the chart, and migrate your existing application to the new NGINX instances.

To 5.6.0

Added support for the use of LDAP.

To 5.0.0

Backwards compatibility is not guaranteed unless you modify the labels used on the chart's deployments. Use the workaround below to upgrade from versions previous to 5.0.0. The following example assumes that the release name is nginx:

kubectl delete deployment nginx --cascade=false
helm upgrade nginx oci://REGISTRY_NAME/REPOSITORY_NAME/nginx

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

To 1.0.0

Backwards compatibility is not guaranteed unless you modify the labels used on the chart's deployments. Use the workaround below to upgrade from versions previous to 1.0.0. The following example assumes that the release name is nginx:

kubectl patch deployment nginx --type=json -p='[{"op": "remove", "path": "/spec/selector/matchLabels/chart"}]'

License

Copyright © 2025 Broadcom. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.