charts/bitnami/thanos

Thanos

Thanos is a highly available metrics system that can be added on top of existing Prometheus deployments, providing a global query view across all Prometheus installations.

TL;DR

helm repo add bitnami https://charts.bitnami.com/bitnami
helm install my-release bitnami/thanos

Introduction

This chart bootstraps a Thanos deployment on a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.12+
• Helm 3.1.0
• PV provisioner support in the underlying infrastructure

Installing the Chart

To install the chart with the release name my-release:

helm repo add bitnami https://charts.bitnami.com/bitnami
helm install my-release bitnami/thanos

These commands deploy Thanos on the Kubernetes cluster with the default configuration. The configuration section lists the parameters that can be configured during installation.

Tip

: List all releases using helm list

Uninstalling the Chart

To uninstall/delete the my-release chart:

helm uninstall my-release

Architecture

This charts allows you install several Thanos components, so you deploy an architecture as the one below:

                       ┌──────────────┐                  ┌──────────────┐      ┌──────────────┐
                       │ Thanos       │───────────┬────▶ │ Thanos Store │      │ Thanos       │
                       │ Query        │           │      │ Gateway      │      │ Compactor    │
                       └──────────────┘           │      └──────────────┘      └──────────────┘
                   push                           │             │                     │
┌──────────────┐   alerts   ┌──────────────┐      │             │ storages            │ Downsample &
│ Alertmanager │ ◀──────────│ Thanos       │ ◀────┤             │ query metrics       │ compact blocks
│ (*)          │            │ Ruler        │      │             │                     │
└──────────────┘            └──────────────┘      │             ▼                     │
      ▲                            │              │      ┌────────────────┐           │
      │ push alerts                └──────────────│────▶ │ MinIO® (*) │ ◀─────────┘
      │                                           │      │                │
┌ ── ── ── ── ── ── ── ── ── ──┐                  │      └────────────────┘
│┌────────────┐  ┌────────────┐│                  │             ▲
││ Prometheus │─▶│ Thanos     ││ ◀────────────────┘             │
││ (*)        │◀─│ Sidecar (*)││    query                       │ inspect
│└────────────┘  └────────────┘│    metrics                     │ blocks
└ ── ── ── ── ── ── ── ── ── ──┘                                │
                                                         ┌──────────────┐
                                                         │ Thanos       │
                                                         │ Bucket Web   │
                                                         └──────────────┘

Note: Components marked with (*) are provided by subchart(s) (such as the Bitnami MinIO® chart) or external charts (such as the Bitnami kube-prometheus chart).

Check the section Integrate Thanos with Prometheus and Alertmanager for detailed instructions to deploy this architecture.

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.storageClass	Global StorageClass for Persistent Volume(s)	""

Common parameters

Name	Description	Value
kubeVersion	Force target Kubernetes version (using Helm capabilities if not set)	""
nameOverride	String to partially override common.names.fullname template (will maintain the release name)	""
fullnameOverride	String to fully override common.names.fullname template	""
commonLabels	Add labels to all the deployed resources	{}
clusterDomain	Kubernetes Cluster Domain	cluster.local

Thanos common parameters

Name	Description	Value
image.registry	Thanos image registry	docker.io
image.repository	Thanos image repository	bitnami/thanos
image.tag	Thanos image tag (immutable tags are recommended)	0.22.0-scratch-r2
image.pullPolicy	Thanos image pull policy	IfNotPresent
image.pullSecrets	Specify docker-registry secret names as an array	[]
objstoreConfig	The objstore configuration	""
indexCacheConfig	The index cache configuration	""
bucketCacheConfig	The bucket cache configuration	""
existingObjstoreSecret	Secret with Objstore Configuration	""
existingObjstoreSecretItems	Optional item list for specifying a custom Secret key. If so, path should be objstore.yml	[]
existingServiceAccount	Provide a common service account to be shared with all components	""

Thanos Query parameters

Name	Description	Value
query.enabled	Set to true to enable Thanos Query component	true
query.logLevel	Thanos Query log level	info
query.logFormat	Thanos Query log format	logfmt
query.serviceAccount.annotations	Annotations for Thanos Query Service Account	{}
query.serviceAccount.existingServiceAccount	Provide an existing service account for query	""
query.hostAliases	Deployment pod host aliases	[]
query.replicaLabel	Replica indicator(s) along which data is deduplicated	[]
query.dnsDiscovery.enabled	Enable store APIs discovery via DNS	true
query.dnsDiscovery.sidecarsService	Sidecars service name to discover them using DNS discovery	""
query.dnsDiscovery.sidecarsNamespace	Sidecars namespace to discover them using DNS discovery	""
query.stores	Statically configure store APIs to connect with Thanos Query	[]
query.sdConfig	Query Service Discovery Configuration	""
query.existingSDConfigmap	Name of existing ConfigMap with Ruler configuration	""
query.extraContainers	Extra containers running as sidecars to Thanos query	[]
query.extraEnv	Extra environment variables for Thanos query container	[]
query.extraVolumes	Extra volumes to add to Thanos Query	[]
query.extraVolumeMounts	Extra volume mounts to add to the query container	[]
query.extraFlags	Extra Flags to passed to Thanos Query	[]
query.replicaCount	Number of Thanos Query replicas to deploy	1
query.strategyType	Deployment Strategy Type, can be set to RollingUpdate or Recreate by default	RollingUpdate
query.podAffinityPreset	Thanos Query pod affinity preset	""
query.podAntiAffinityPreset	Thanos Query pod anti-affinity preset. Ignored if query.affinity is set. Allowed values: soft or hard	soft
query.nodeAffinityPreset.type	Thanos Query node affinity preset type. Ignored if query.affinity is set. Allowed values: soft or hard	""
query.nodeAffinityPreset.key	Thanos Query node label key to match Ignored if query.affinity is set.	""
query.nodeAffinityPreset.values	Thanos Query node label values to match. Ignored if query.affinity is set.	[]
query.affinity	Thanos Query affinity for pod assignment	{}
query.nodeSelector	Thanos Query node labels for pod assignment	{}
query.tolerations	Thanos Query tolerations for pod assignment	[]
query.podLabels	Thanos Query pod labels	{}
query.podAnnotations	Annotations for Thanos Query pods	{}
query.priorityClassName	Controller priorityClassName	""
query.podSecurityContext.enabled	Enable security context for the Thanos Query pod	true
query.podSecurityContext.fsGroup	Group ID for the filesystem used by Query container	1001
query.podSecurityContext.runAsUser	User ID for the service user running the Query pod	1001
query.containerSecurityContext.enabled	Enable container security context for Query container	true
query.containerSecurityContext.runAsNonRoot	Force the container Query to run as a non root user	true
query.containerSecurityContext.allowPrivilegeEscalation	Switch privilegeEscalation possiblity on or off for Query	false
query.containerSecurityContext.readOnlyRootFilesystem	mount / (root) as a readonly filesystem of Query container	false
query.rbac.create	Create ClusterRole and ClusterRolebing for the Service account	false
query.pspEnabled	Create PodSecurity Policy	false
query.resources.limits	The resources limits for the Thanos Query container	{}
query.resources.requests	The requested resources for the Thanos Query container	{}
query.livenessProbe.enabled	Enable livenessProbe	true
query.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
query.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
query.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
query.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
query.livenessProbe.successThreshold	Success threshold for livenessProbe	1
query.readinessProbe.enabled	Enable readinessProbe	true
query.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
query.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
query.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
query.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
query.readinessProbe.successThreshold	Success threshold for readinessProbe	1
query.grpcTLS.server.secure	Enable TLS for GRPC server	false
query.grpcTLS.server.autoGenerated	Create self-signed TLS certificates. Currently only supports PEM certificates.	false
query.grpcTLS.server.cert	TLS Certificate for gRPC server, leave blank to disable TLS - ignored if existingSecret is provided	""
query.grpcTLS.server.key	TLS Key for the gRPC server, leave blank to disable TLS - ignored if existingSecret is provided	""
query.grpcTLS.server.ca	TLS CA to verify clients against	""
query.grpcTLS.server.existingSecret	Existing secret containing your own TLS certificates.	{}
query.grpcTLS.client.secure	Use TLS when talking to the gRPC server	false
query.grpcTLS.client.autoGenerated	Create self-signed TLS certificates. Currently only supports PEM certificates.	false
query.grpcTLS.client.cert	TLS Certificates to use to identify this client to the server - ignored if existingSecret is provided	""
query.grpcTLS.client.key	TLS Key for the client's certificate - ignored if existingSecret is provided	""
query.grpcTLS.client.ca	TLS CA Certificates to use to verify gRPC servers - ignored if existingSecret is provided	""
query.grpcTLS.client.servername	Server name to verify the hostname on the returned gRPC certificates. See https://tools.ietf.org/html/rfc4366#section-3.1	""
query.grpcTLS.client.existingSecret	Existing secret containing your own TLS certificates.	{}
query.service.type	Kubernetes service type	ClusterIP
query.service.clusterIP	Thanos Query service clusterIP IP	""
query.service.http.port	Service HTTP port	9090
query.service.http.nodePort	Service HTTP node port	""
query.service.targetPort	Service targetPort override	http
query.service.grpc.port	Service GRPC port	10901
query.service.grpc.nodePort	Service GRPC node port	""
query.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
query.service.loadBalancerSourceRanges	Address that are allowed when service is LoadBalancer	[]
query.service.externalTrafficPolicy	Thanos Query service externalTrafficPolicy	Cluster
query.service.annotations	Annotations for Thanos Query service	{}
query.service.labelSelectorsOverride	Selector for Thanos query service	{}
query.autoscaling.enabled	Enable autoscaling for Thanos Query	false
query.autoscaling.minReplicas	Minimum number of Thanos Query replicas	""
query.autoscaling.maxReplicas	Maximum number of Thanos Query replicas	""
query.autoscaling.targetCPU	Target CPU utilization percentage	""
query.autoscaling.targetMemory	Target Memory utilization percentage	""
query.pdb.create	Enable/disable a Pod Disruption Budget creation	false
query.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	1
query.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
query.ingress.enabled	Enable ingress controller resource	false
query.ingress.certManager	Set this to true in order to add the corresponding annotations for cert-manager	false
query.ingress.hostname	Default host for the ingress resource	thanos.local
query.ingress.annotations	Ingress annotations	{}
query.ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
query.ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
query.ingress.secrets	If you're providing your own certificates, please use this to add the certificates as secrets	[]
query.ingress.tls	Create ingress TLS section	false
query.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
query.ingress.path	Ingress path	/
query.ingress.pathType	Ingress path type	ImplementationSpecific
query.ingress.grpc.enabled	Enable ingress controller resource (GRPC)	false
query.ingress.grpc.certManager	Add annotations for cert-manager (GRPC)	false
query.ingress.grpc.hostname	Default host for the ingress resource (GRPC)	thanos-grpc.local
query.ingress.grpc.annotations	Ingress annotations (GRPC)	{}
query.ingress.grpc.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
query.ingress.grpc.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
query.ingress.grpc.secrets	If you're providing your own certificates, please use this to add the certificates as secrets	[]
query.ingress.grpc.apiVersion	Override API Version (automatically detected if not set)	""
query.ingress.grpc.path	Ingress Path	/
query.ingress.grpc.pathType	Ingress Path type	ImplementationSpecific

Thanos Query Frontend parameters

Name	Description	Value
queryFrontend.enabled	Enable/disable Thanos Query Frontend component	true
queryFrontend.logLevel	Thanos Query Frontend log level	info
queryFrontend.logFormat	Thanos Query Frontend log format	logfmt
queryFrontend.serviceAccount.annotations	Annotations for Thanos Query Frontend Service Account	{}
queryFrontend.serviceAccount.existingServiceAccount	Provide an existing service account for Query Frontend	""
queryFrontend.hostAliases	Deployment pod host aliases	[]
queryFrontend.extraContainers	Extra containers running as sidecars to Thanos Query Frontend container	[]
queryFrontend.extraEnv	Extra environment variables for Thanos Query Frontend container	[]
queryFrontend.extraVolumes	Extra volumes to add to Thanos Query Frontend	[]
queryFrontend.extraVolumeMounts	Extra volume mounts to add to the query-frontend container	[]
queryFrontend.extraFlags	Extra Flags to passed to Thanos Query Frontend	[]
queryFrontend.config	Thanos Query Frontend cache configuration	""
queryFrontend.existingConfigmap	Name of existing ConfigMap with Thanos Query Frontend cache configuration	""
queryFrontend.replicaCount	Number of Thanos Query Frontend replicas to deploy	1
queryFrontend.strategyType	Deployment Strategy Type, can be set to RollingUpdate or Recreate by default	RollingUpdate
queryFrontend.podAffinityPreset	Thanos Query Frontend pod affinity preset	""
queryFrontend.podAntiAffinityPreset	Thanos Query Frontend pod anti-affinity preset. Ignored if queryFrontend.affinity is set. Allowed values: soft or hard	soft
queryFrontend.nodeAffinityPreset.type	Thanos Query Frontend node affinity preset type. Ignored if queryFrontend.affinity is set. Allowed values: soft or hard	""
queryFrontend.nodeAffinityPreset.key	Thanos Query Frontend node label key to match Ignored if queryFrontend.affinity is set.	""
queryFrontend.nodeAffinityPreset.values	Thanos Query Frontend node label values to match. Ignored if queryFrontend.affinity is set.	[]
queryFrontend.affinity	Thanos Query Frontend affinity for pod assignment	{}
queryFrontend.nodeSelector	Thanos Query Frontend node labels for pod assignment	{}
queryFrontend.tolerations	Thanos Query Frontend tolerations for pod assignment	[]
queryFrontend.podLabels	Thanos Query Frontend pod labels	{}
queryFrontend.podAnnotations	Annotations for Thanos Query Frontend pods	{}
queryFrontend.priorityClassName	Controller priorityClassName	""
queryFrontend.podSecurityContext.enabled	Enable security context for the Thanos Queryfrontend pod	true
queryFrontend.podSecurityContext.fsGroup	Group ID for the filesystem used by Queryfrontend container	1001
queryFrontend.podSecurityContext.runAsUser	User ID for the service user running the Queryfrontend pod	1001
queryFrontend.containerSecurityContext.enabled	Enable container security context for Queryfrontend container	true
queryFrontend.containerSecurityContext.runAsNonRoot	Force the container Queryfrontend to run as a non root user	true
queryFrontend.containerSecurityContext.allowPrivilegeEscalation	Switch privilegeEscalation possiblity on or off for Queryfrontend	false
queryFrontend.containerSecurityContext.readOnlyRootFilesystem	mount / (root) as a readonly filesystem of Queryfrontend container	false
queryFrontend.rbac.create	Create ClusterRole and ClusterRolebing for the Service account	false
queryFrontend.pspEnabled	Create PodSecurity Policy	false
queryFrontend.resources.limits	The resources limits for the Thanos Query Frontend container	{}
queryFrontend.resources.requests	The requested resources for the Thanos Query Frontend container	{}
queryFrontend.livenessProbe.enabled	Enable livenessProbe	true
queryFrontend.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
queryFrontend.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
queryFrontend.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
queryFrontend.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
queryFrontend.livenessProbe.successThreshold	Success threshold for livenessProbe	1
queryFrontend.readinessProbe.enabled	Enable readinessProbe	true
queryFrontend.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
queryFrontend.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
queryFrontend.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
queryFrontend.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
queryFrontend.readinessProbe.successThreshold	Success threshold for readinessProbe	1
queryFrontend.service.type	Kubernetes service type	ClusterIP
queryFrontend.service.clusterIP	Thanos Query Frontend service clusterIP IP	""
queryFrontend.service.http.port	Service HTTP port	9090
queryFrontend.service.http.nodePort	Service HTTP node port	""
queryFrontend.service.targetPort	Service targetPort override	http
queryFrontend.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
queryFrontend.service.loadBalancerSourceRanges	Address that are allowed when service is LoadBalancer	[]
queryFrontend.service.externalTrafficPolicy	Thanos Query Frontend service externalTrafficPolicy	Cluster
queryFrontend.service.annotations	Annotations for Thanos Query Frontend service	{}
queryFrontend.service.labelSelectorsOverride	Selector for Thanos query service	{}
queryFrontend.autoscaling.enabled	Enable autoscaling for Thanos Query Frontend	false
queryFrontend.autoscaling.minReplicas	Minimum number of Thanos Query Frontend replicas	""
queryFrontend.autoscaling.maxReplicas	Maximum number of Thanos Query Frontend replicas	""
queryFrontend.autoscaling.targetCPU	Target CPU utilization percentage	""
queryFrontend.autoscaling.targetMemory	Target Memory utilization percentage	""
queryFrontend.pdb.create	Enable/disable a Pod Disruption Budget creation	false
queryFrontend.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	1
queryFrontend.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
queryFrontend.ingress.enabled	Enable ingress controller resource	false
queryFrontend.ingress.certManager	Set this to true in order to add the corresponding annotations for cert-manager	false
queryFrontend.ingress.hostname	Default host for the ingress resource	thanos.local
queryFrontend.ingress.annotations	Ingress annotations	{}
queryFrontend.ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
queryFrontend.ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
queryFrontend.ingress.secrets	If you're providing your own certificates, please use this to add the certificates as secrets	[]
queryFrontend.ingress.tls	Create ingress TLS section	false
queryFrontend.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
queryFrontend.ingress.path	Ingress path	/
queryFrontend.ingress.pathType	Ingress path type	ImplementationSpecific

Thanos Bucket Web parameters

Name	Description	Value
bucketweb.enabled	Enable/disable Thanos Bucket Web component	false
bucketweb.logLevel	Thanos Bucket Web log level	info
bucketweb.logFormat	Thanos Bucket Web log format	logfmt
bucketweb.serviceAccount.annotations	Annotations for Thanos Bucket Web Service Account	{}
bucketweb.serviceAccount.existingServiceAccount	Name for an existing Thanos Bucket Web Service Account	""
bucketweb.refresh	Refresh interval to download metadata from remote storage	30m
bucketweb.hostAliases	Deployment pod host aliases	[]
bucketweb.timeout	Timeout to download metadata from remote storage	5m
bucketweb.extraContainers	Extra containers running as sidecars to Thanos Bucket Web container	[]
bucketweb.extraEnv	Extra environment variables for Thanos Bucket Web container	[]
bucketweb.extraVolumes	Extra volumes to add to Bucket Web	[]
bucketweb.extraVolumeMounts	Extra volume mounts to add to the bucketweb container	[]
bucketweb.extraFlags	Extra Flags to passed to Thanos Bucket Web	[]
bucketweb.replicaCount	Number of Thanos Bucket Web replicas to deploy	1
bucketweb.strategyType	Deployment Strategy Type, can be set to RollingUpdate or Recreate by default	RollingUpdate
bucketweb.podAffinityPreset	Thanos Bucket Web pod affinity preset	""
bucketweb.podAntiAffinityPreset	Thanos Bucket Web pod anti-affinity preset. Ignored if bucketweb.affinity is set. Allowed values: soft or hard	soft
bucketweb.nodeAffinityPreset.type	Thanos Bucket Web node affinity preset type. Ignored if bucketweb.affinity is set. Allowed values: soft or hard	""
bucketweb.nodeAffinityPreset.key	Thanos Bucket Web node label key to match Ignored if bucketweb.affinity is set.	""
bucketweb.nodeAffinityPreset.values	Thanos Bucket Web node label values to match. Ignored if bucketweb.affinity is set.	[]
bucketweb.affinity	Thanos Bucket Web affinity for pod assignment	{}
bucketweb.nodeSelector	Thanos Bucket Web node labels for pod assignment	{}
bucketweb.tolerations	Thanos Bucket Web tolerations for pod assignment	[]
bucketweb.podLabels	Thanos Bucket Web pod labels	{}
bucketweb.podAnnotations	Annotations for Thanos Bucket Web pods	{}
bucketweb.priorityClassName	Controller priorityClassName	""
bucketweb.podSecurityContext.enabled	Enable security context for the Thanos Bucketweb pod	true
bucketweb.podSecurityContext.fsGroup	Group ID for the filesystem used by Bucketweb container	1001
bucketweb.podSecurityContext.runAsUser	User ID for the service user running the Bucketweb pod	1001
bucketweb.containerSecurityContext.enabled	Enable container security context for Bucketweb container	true
bucketweb.containerSecurityContext.runAsNonRoot	Force the container Bucketweb to run as a non root user	true
bucketweb.containerSecurityContext.allowPrivilegeEscalation	Switch privilegeEscalation possiblity on or off for Bucketweb	false
bucketweb.containerSecurityContext.readOnlyRootFilesystem	mount / (root) as a readonly filesystem of Bucketweb container	false
bucketweb.resources.limits	The resources limits for the Thanos Bucket Web container	{}
bucketweb.resources.requests	The requested resources for the Thanos Bucket Web container	{}
bucketweb.livenessProbe.enabled	Enable livenessProbe	true
bucketweb.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
bucketweb.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
bucketweb.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
bucketweb.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
bucketweb.livenessProbe.successThreshold	Success threshold for livenessProbe	1
bucketweb.readinessProbe.enabled	Enable readinessProbe	true
bucketweb.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
bucketweb.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
bucketweb.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
bucketweb.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
bucketweb.readinessProbe.successThreshold	Success threshold for readinessProbe	1
bucketweb.service.type	Kubernetes service type	ClusterIP
bucketweb.service.clusterIP	Thanos Bucket Web service clusterIP IP	""
bucketweb.service.http.port	Service HTTP port	8080
bucketweb.service.http.nodePort	Service HTTP node port	""
bucketweb.service.targetPort	Service targetPort override	http
bucketweb.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
bucketweb.service.loadBalancerSourceRanges	Address that are allowed when service is LoadBalancer	[]
bucketweb.service.externalTrafficPolicy	Thanos Bucket Web service externalTrafficPolicy	Cluster
bucketweb.service.annotations	Annotations for Thanos Bucket Web service	{}
bucketweb.service.labelSelectorsOverride	Selector for Thanos query service	{}
bucketweb.pdb.create	Enable/disable a Pod Disruption Budget creation	false
bucketweb.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	1
bucketweb.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
bucketweb.ingress.enabled	Enable ingress controller resource	false
bucketweb.ingress.certManager	Add annotations for cert-manager	false
bucketweb.ingress.hostname	Default host for the ingress resource	thanos-bucketweb.local
bucketweb.ingress.annotations	Ingress annotations	{}
bucketweb.ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
bucketweb.ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
bucketweb.ingress.secrets	If you're providing your own certificates, please use this to add the certificates as secrets	[]
bucketweb.ingress.tls	Create ingress TLS section	false
bucketweb.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
bucketweb.ingress.path	Ingress path	/
bucketweb.ingress.pathType	Ingress path type	ImplementationSpecific

Thanos Compactor parameters

Name	Description	Value
compactor.enabled	Enable/disable Thanos Compactor component	false
compactor.logLevel	Thanos Compactor log level	info
compactor.logFormat	Thanos Compactor log format	logfmt
compactor.serviceAccount.annotations	Annotations for Thanos Compactor Service Account	{}
compactor.serviceAccount.existingServiceAccount	Name for an existing Thanos Compactor Service Account	""
compactor.hostAliases	Deployment pod host aliases	[]
compactor.retentionResolutionRaw	Resolution and Retention flag	30d
compactor.retentionResolution5m	Resolution and Retention flag	30d
compactor.retentionResolution1h	Resolution and Retention flag	10y
compactor.consistencyDelay	Minimum age of fresh (non-compacted) blocks before they are being processed	30m
compactor.extraEnv	Extra environment variables for Thanos Compactor container	[]
compactor.extraVolumes	Extra volumes to add to Thanos Compactor	[]
compactor.extraVolumeMounts	Extra volume mounts to add to the compactor container	[]
compactor.extraFlags	Extra Flags to passed to Thanos Compactor	[]
compactor.strategyType	Deployment Strategy Type, can be set to RollingUpdate or Recreate by default	RollingUpdate
compactor.podAffinityPreset	Thanos Compactor pod affinity preset	""
compactor.podAntiAffinityPreset	Thanos Compactor pod anti-affinity preset. Ignored if compactor.affinity is set. Allowed values: soft or hard	soft
compactor.nodeAffinityPreset.type	Thanos Compactor node affinity preset type. Ignored if compactor.affinity is set. Allowed values: soft or hard	""
compactor.nodeAffinityPreset.key	Thanos Compactor node label key to match Ignored if compactor.affinity is set.	""
compactor.nodeAffinityPreset.values	Thanos Compactor node label values to match. Ignored if compactor.affinity is set.	[]
compactor.affinity	Thanos Compactor affinity for pod assignment	{}
compactor.nodeSelector	Thanos Compactor node labels for pod assignment	{}
compactor.tolerations	Thanos Compactor tolerations for pod assignment	[]
compactor.podLabels	Thanos Compactor pod labels	{}
compactor.podAnnotations	Annotations for Thanos Compactor pods	{}
compactor.priorityClassName	Controller priorityClassName	""
compactor.podSecurityContext.enabled	Enable security context for the Thanos Compactor pod	true
compactor.podSecurityContext.fsGroup	Group ID for the filesystem used by Compactor container	1001
compactor.podSecurityContext.runAsUser	User ID for the service user running the Compactor pod	1001
compactor.containerSecurityContext.enabled	Enable container security context for Compactor container	true
compactor.containerSecurityContext.runAsNonRoot	Force the container Compactor to run as a non root user	true
compactor.containerSecurityContext.allowPrivilegeEscalation	Switch privilegeEscalation possiblity on or off for Compactor	false
compactor.containerSecurityContext.readOnlyRootFilesystem	mount / (root) as a readonly filesystem of Compactor container	false
compactor.resources.limits	The resources limits for the Thanos Compactor container	{}
compactor.resources.requests	The requested resources for the Thanos Compactor container	{}
compactor.livenessProbe.enabled	Enable livenessProbe	true
compactor.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
compactor.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
compactor.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
compactor.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
compactor.livenessProbe.successThreshold	Success threshold for livenessProbe	1
compactor.readinessProbe.enabled	Enable readinessProbe	true
compactor.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
compactor.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
compactor.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
compactor.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
compactor.readinessProbe.successThreshold	Success threshold for readinessProbe	1
compactor.service.type	Kubernetes service type	ClusterIP
compactor.service.clusterIP	Thanos Compactor service clusterIP IP	""
compactor.service.http.port	Service HTTP port	9090
compactor.service.http.nodePort	Service HTTP node port	""
compactor.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
compactor.service.loadBalancerSourceRanges	Addresses that are allowed when service is LoadBalancer	[]
compactor.service.externalTrafficPolicy	Thanos Compactor service externalTrafficPolicy	Cluster
compactor.service.annotations	Annotations for Thanos Compactor service	{}
compactor.service.labelSelectorsOverride	Selector for Thanos query service	{}
compactor.persistence.enabled	Enable data persistence	true
compactor.persistence.existingClaim	Use a existing PVC which must be created manually before bound	""
compactor.persistence.storageClass	Specify the storageClass used to provision the volume	""
compactor.persistence.accessModes	Access modes of data volume	[]
compactor.persistence.size	Size of data volume	8Gi

Thanos Store Gateway parameters

Name	Description	Value
storegateway.enabled	Enable/disable Thanos Store Gateway component	false
storegateway.logLevel	Thanos Store Gateway log level	info
storegateway.logFormat	Thanos Store Gateway log format	logfmt
storegateway.serviceAccount.annotations	Annotations for Thanos Store Gateway Service Account	{}
storegateway.serviceAccount.existingServiceAccount	Name for an existing Thanos Store Gateway Service Account	""
storegateway.hostAliases	Deployment pod host aliases	[]
storegateway.extraEnv	Extra environment variables for Thanos Store Gateway container	[]
storegateway.extraVolumes	Extra volumes to add to Thanos Store Gateway	[]
storegateway.extraVolumeMounts	Extra volume mounts to add to the storegateway container	[]
storegateway.extraFlags	Extra Flags to passed to Thanos Store Gateway	[]
storegateway.config	Thanos Store Gateway cache configuration	""
storegateway.existingConfigmap	Name of existing ConfigMap with Thanos Store Gateway cache configuration	""
storegateway.grpc.tls.enabled	Enable TLS encryption in the GRPC server	false
storegateway.grpc.tls.autoGenerated	Create self-signed TLS certificates. Currently only supports PEM certificates.	false
storegateway.grpc.tls.cert	TLS Certificate for gRPC server, leave blank to disable TLS - ignored if existingSecret is provided	""
storegateway.grpc.tls.key	TLS Key for gRPC server, leave blank to disable TLS - ignored if existingSecret is provided	""
storegateway.grpc.tls.ca	TLS CA to verify clients against - ignored if existingSecret is provided	""
storegateway.grpc.tls.existingSecret	Existing secret containing your own TLS certificates.	{}
storegateway.replicaCount	Number of Thanos Store Gateway replicas to deploy	1
storegateway.updateStrategyType	Statefulset Update Strategy Type, can be set to RollingUpdate or OnDelete by default	RollingUpdate
storegateway.podManagementPolicy	Statefulset Pod management policy: OrderedReady (default) or Parallel	OrderedReady
storegateway.podAffinityPreset	Thanos Store Gateway pod affinity preset	""
storegateway.podAntiAffinityPreset	Thanos Store Gateway pod anti-affinity preset. Ignored if storegateway.affinity is set. Allowed values: soft or hard	soft
storegateway.nodeAffinityPreset.type	Thanos Store Gateway node affinity preset type. Ignored if storegateway.affinity is set. Allowed values: soft or hard	""
storegateway.nodeAffinityPreset.key	Thanos Store Gateway node label key to match Ignored if storegateway.affinity is set.	""
storegateway.nodeAffinityPreset.values	Thanos Store Gateway node label values to match. Ignored if storegateway.affinity is set.	[]
storegateway.affinity	Thanos Store Gateway affinity for pod assignment	{}
storegateway.nodeSelector	Thanos Store Gateway node labels for pod assignment	{}
storegateway.tolerations	Thanos Store Gateway tolerations for pod assignment	[]
storegateway.podLabels	Thanos Store Gateway pod labels	{}
storegateway.podAnnotations	Annotations for Thanos Store Gateway pods	{}
storegateway.priorityClassName	Controller priorityClassName	""
storegateway.podSecurityContext.enabled	Enable security context for the Thanos Storegateway pod	true
storegateway.podSecurityContext.fsGroup	Group ID for the filesystem used by Storegateway container	1001
storegateway.podSecurityContext.runAsUser	User ID for the service user running the Storegateway pod	1001
storegateway.containerSecurityContext.enabled	Enable container security context for Storegateway container	true
storegateway.containerSecurityContext.runAsNonRoot	Force the container Storegateway to run as a non root user	true
storegateway.containerSecurityContext.allowPrivilegeEscalation	Switch privilegeEscalation possiblity on or off for Storegateway	false
storegateway.containerSecurityContext.readOnlyRootFilesystem	mount / (root) as a readonly filesystem of Storegateway container	false
storegateway.resources.limits	The resources limits for the Thanos Store Gateway container	{}
storegateway.resources.requests	The requested resources for the Thanos Store Gateway container	{}
storegateway.livenessProbe.enabled	Enable livenessProbe	true
storegateway.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
storegateway.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
storegateway.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
storegateway.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
storegateway.livenessProbe.successThreshold	Success threshold for livenessProbe	1
storegateway.readinessProbe.enabled	Enable readinessProbe	true
storegateway.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
storegateway.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
storegateway.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
storegateway.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
storegateway.readinessProbe.successThreshold	Success threshold for readinessProbe	1
storegateway.service.type	Kubernetes service type	ClusterIP
storegateway.service.clusterIP	Thanos Store Gateway service clusterIP IP	""
storegateway.service.http.port	Service HTTP port	9090
storegateway.service.http.nodePort	Service HTTP node port	""
storegateway.service.grpc.port	Service GRPC port	10901
storegateway.service.grpc.nodePort	Service GRPC node port	""
storegateway.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
storegateway.service.loadBalancerSourceRanges	Addresses that are allowed when service is LoadBalancer	[]
storegateway.service.externalTrafficPolicy	Thanos Store Gateway service externalTrafficPolicy	Cluster
storegateway.service.annotations	Annotations for Thanos Store Gateway service	{}
storegateway.service.labelSelectorsOverride	Selector for Thanos query service	{}
storegateway.service.additionalHeadless	Additional Headless service	false
storegateway.persistence.enabled	Enable data persistence	true
storegateway.persistence.existingClaim	Use a existing PVC which must be created manually before bound	""
storegateway.persistence.storageClass	Specify the storageClass used to provision the volume	""
storegateway.persistence.accessModes	Access modes of data volume	[]
storegateway.persistence.size	Size of data volume	8Gi
storegateway.autoscaling.enabled	Enable autoscaling for Thanos Store Gateway	false
storegateway.autoscaling.minReplicas	Minimum number of Thanos Store Gateway replicas	""
storegateway.autoscaling.maxReplicas	Maximum number of Thanos Store Gateway replicas	""
storegateway.autoscaling.targetCPU	Target CPU utilization percentage	""
storegateway.autoscaling.targetMemory	Target Memory utilization percentage	""
storegateway.pdb.create	Enable/disable a Pod Disruption Budget creation	false
storegateway.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	1
storegateway.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
storegateway.sharded.enabled	Enable sharding for Thanos Store Gateway	false
storegateway.sharded.hashPartitioning.shards	Setting hashPartitioning will create multiple store statefulsets based on the number of shards specified using the hashmod of the blocks	""
storegateway.sharded.timePartitioning	Setting time timePartitioning will create multiple store deployments based on the number of partitions	[]
storegateway.sharded.service.clusterIPs	Array of cluster IPs for each Store Gateway service. Length must be the same as the number of shards	[]
storegateway.sharded.service.loadBalancerIPs	Array of load balancer IPs for each Store Gateway service. Length must be the same as the number of shards	[]
storegateway.sharded.service.http.nodePorts	Array of http node ports used for Store Gateway service. Length must be the same as the number of shards	[]
storegateway.sharded.service.grpc.nodePorts	Array of grpc node ports used for Store Gateway service. Length must be the same as the number of shards	[]

Thanos Ruler parameters

Name	Description	Value
ruler.enabled	Enable/disable Thanos Ruler component	false
ruler.logLevel	Thanos Ruler log level	info
ruler.logFormat	Thanos Ruler log format	logfmt
ruler.replicaLabel	Label to treat as a replica indicator along which data is deduplicated	replica
ruler.serviceAccount.annotations	Annotations for Thanos Ruler Service Account	{}
ruler.serviceAccount.existingServiceAccount	Name for an existing Thanos Ruler Service Account	""
ruler.hostAliases	Add deployment host aliases	[]
ruler.dnsDiscovery.enabled	Dynamically configure Query APIs using DNS discovery	true
ruler.alertmanagers	Alermanager URLs array	[]
ruler.alertmanagersConfig	Alertmanagers Configuration	""
ruler.evalInterval	The default evaluation interval to use	1m
ruler.clusterName	Used to set the 'ruler_cluster' label	""
ruler.extraContainers	Extra containers running as sidecars to Thanos Ruler container	[]
ruler.extraEnv	Extra environment variables for Thanos Ruler container	[]
ruler.extraVolumes	Extra volumes to add to Thanos Ruler	[]
ruler.extraVolumeMounts	Extra volume mounts to add to the ruler container	[]
ruler.extraFlags	Extra Flags to passed to Thanos Ruler	[]
ruler.config	Ruler configuration	""
ruler.existingConfigmap	Name of existing ConfigMap with Ruler configuration	""
ruler.replicaCount	Number of Thanos Ruler replicas to deploy	1
ruler.updateStrategyType	Statefulset Update Strategy Type	RollingUpdate
ruler.podManagementPolicy	Statefulset Pod Management Policy Type	OrderedReady
ruler.podAffinityPreset	Thanos Ruler pod affinity preset	""
ruler.podAntiAffinityPreset	Thanos Ruler pod anti-affinity preset. Ignored if ruler.affinity is set. Allowed values: soft or hard	soft
ruler.nodeAffinityPreset.type	Thanos Ruler node affinity preset type. Ignored if ruler.affinity is set. Allowed values: soft or hard	""
ruler.nodeAffinityPreset.key	Thanos Ruler node label key to match Ignored if ruler.affinity is set.	""
ruler.nodeAffinityPreset.values	Thanos Ruler node label values to match. Ignored if ruler.affinity is set.	[]
ruler.affinity	Thanos Ruler affinity for pod assignment	{}
ruler.nodeSelector	Thanos Ruler node labels for pod assignment	{}
ruler.tolerations	Thanos Ruler tolerations for pod assignment	[]
ruler.podLabels	Thanos Ruler pod labels	{}
ruler.podAnnotations	Annotations for Thanos Ruler pods	{}
ruler.priorityClassName	Controller priorityClassName	""
ruler.podSecurityContext.enabled	Enable security context for the Thanos Ruler pod	true
ruler.podSecurityContext.fsGroup	Group ID for the filesystem used by Ruler container	1001
ruler.podSecurityContext.runAsUser	User ID for the service user running the Ruler pod	1001
ruler.containerSecurityContext.enabled	Enable container security context for Ruler container	true
ruler.containerSecurityContext.runAsNonRoot	Force the container Ruler to run as a non root user	true
ruler.containerSecurityContext.allowPrivilegeEscalation	Switch privilegeEscalation possiblity on or off for Ruler	false
ruler.containerSecurityContext.readOnlyRootFilesystem	mount / (root) as a readonly filesystem of Ruler container	false
ruler.resources.limits	The resources limits for the Thanos Ruler container	{}
ruler.resources.requests	The requested resources for the Thanos Ruler container	{}
ruler.livenessProbe.enabled	Enable livenessProbe	true
ruler.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
ruler.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
ruler.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
ruler.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
ruler.livenessProbe.successThreshold	Success threshold for livenessProbe	1
ruler.readinessProbe.enabled	Enable readinessProbe	true
ruler.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
ruler.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
ruler.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
ruler.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
ruler.readinessProbe.successThreshold	Success threshold for readinessProbe	1
ruler.service.type	Kubernetes service type	ClusterIP
ruler.service.clusterIP	Thanos Ruler service clusterIP IP	""
ruler.service.http.port	Service HTTP port	9090
ruler.service.http.nodePort	Service HTTP node port	""
ruler.service.targetPort	Service targetPort override	http
ruler.service.grpc.port	Service GRPC port	10901
ruler.service.grpc.nodePort	Service GRPC node port	""
ruler.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
ruler.service.loadBalancerSourceRanges	Address that are allowed when service is LoadBalancer	[]
ruler.service.externalTrafficPolicy	Thanos Ruler service externalTrafficPolicy	Cluster
ruler.service.annotations	Annotations for Thanos Ruler service	{}
ruler.service.labelSelectorsOverride	Selector for Thanos query service	{}
ruler.service.additionalHeadless	Additional Headless service	false
ruler.persistence.enabled	Enable data persistence	true
ruler.persistence.existingClaim	Use a existing PVC which must be created manually before bound	""
ruler.persistence.storageClass	Specify the storageClass used to provision the volume	""
ruler.persistence.accessModes	Access modes of data volume	[]
ruler.persistence.size	Size of data volume	8Gi
ruler.pdb.create	Enable/disable a Pod Disruption Budget creation	false
ruler.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	1
ruler.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
ruler.ingress.enabled	Enable ingress controller resource	false
ruler.ingress.certManager	Add annotations for cert-manager	false
ruler.ingress.hostname	Default host for the ingress resource	thanos-ruler.local
ruler.ingress.annotations	Ingress annotations	{}
ruler.ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
ruler.ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
ruler.ingress.secrets	If you're providing your own certificates, please use this to add the certificates as secrets	[]
ruler.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
ruler.ingress.path	Ingress path	/
ruler.ingress.pathType	Ingress path type	ImplementationSpecific

Thanos Receive parameters

Name	Description	Value
receive.enabled	Enable/disable Thanos Receive component	false
receive.logLevel	Thanos Receive log level	info
receive.logFormat	Thanos Receive log format	logfmt
receive.tsdbRetention	Thanos Receive TSDB retention period	15d
receive.replicationFactor	Thanos Receive replication-factor	1
receive.replicaLabel	Label to treat as a replica indicator along which data is deduplicated	replica
receive.serviceAccount.annotations	Annotations for Thanos Receive Service Account	{}
receive.serviceAccount.existingServiceAccount	Name for an existing Thanos Receive Service Account	""
receive.hostAliases	Deployment pod host aliases	[]
receive.config	Receive Hashring configuration	[]
receive.extraContainers	Extra containers running as sidecars to Thanos Receive container	[]
receive.extraEnv	Extra environment variables for Thanos Receive container	[]
receive.extraVolumes	Extra volumes to add to Thanos Receive	[]
receive.extraVolumeMounts	Extra volume mounts to add to the receive container	[]
receive.extraFlags	Extra Flags to passed to Thanos Receive	[]
receive.updateStrategyType	Statefulset Update Strategy Type, can be set to RollingUpdate or OnDelete by default	RollingUpdate
receive.replicaCount	Number of Thanos Receive replicas to deploy	1
receive.strategyType	StrategyType, can be set to RollingUpdate or Recreate by default.	RollingUpdate
receive.podAffinityPreset	Thanos Receive pod affinity preset	""
receive.podAntiAffinityPreset	Thanos Receive pod anti-affinity preset. Ignored if ruler.affinity is set. Allowed values: soft or hard	soft
receive.nodeAffinityPreset.type	Thanos Receive node affinity preset type. Ignored if ruler.affinity is set. Allowed values: soft or hard	""
receive.nodeAffinityPreset.key	Thanos Receive node label key to match Ignored if ruler.affinity is set.	""
receive.nodeAffinityPreset.values	Thanos Receive node label values to match. Ignored if ruler.affinity is set.	[]
receive.affinity	Thanos Receive affinity for pod assignment	{}
receive.nodeSelector	Thanos Receive node labels for pod assignment	{}
receive.tolerations	Thanos Receive tolerations for pod assignment	[]
receive.podLabels	Thanos Receive pod labels	{}
receive.podAnnotations	Annotations for Thanos Ruler pods	{}
receive.priorityClassName	Controller priorityClassName	""
receive.rbac.create	Create ClusterRole and ClusterRolebing for the Service account	false
receive.pspEnabled	Create PodSecurity Policy	false
receive.resources.limits	The resources limits for the Thanos Receive container	{}
receive.resources.requests	The requested resources for the Thanos Receive container	{}
receive.livenessProbe.enabled	Enable livenessProbe	true
receive.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
receive.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
receive.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
receive.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
receive.livenessProbe.successThreshold	Success threshold for livenessProbe	1
receive.readinessProbe.enabled	Enable readinessProbe	true
receive.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
receive.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
receive.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
receive.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
receive.readinessProbe.successThreshold	Success threshold for readinessProbe	1
receive.podSecurityContext.enabled	Enable security context for the Thanos Receive pod	true
receive.podSecurityContext.fsGroup	Group ID for the filesystem used by Receive container	1001
receive.podSecurityContext.runAsUser	User ID for the service user running the Receive pod	1001
receive.containerSecurityContext.enabled	Enable container security context for Receive container	true
receive.containerSecurityContext.runAsNonRoot	Force the container Receive to run as a non root user	true
receive.containerSecurityContext.allowPrivilegeEscalation	Switch privilegeEscalation possiblity on or off for Receive	false
receive.containerSecurityContext.readOnlyRootFilesystem	mount / (root) as a readonly filesystem of Receive container	false
receive.grpc.gracePeriod	Time to wait after an interrupt received for GRPC Server.	2m
receive.grpc.server.secure	enable TLS for GRPC server	false
receive.grpc.server.cert	TLS Certificate for gRPC server, leave blank to disable TLS	""
receive.grpc.server.key	TLS Key for the gRPC server, leave blank to disable TLS	""
receive.grpc.server.ca	TLS CA to verify clients against. If no client CA is specified, there is no client verification on server side. (tls.NoClientCert)	""
receive.service.type	Kubernetes service type	ClusterIP
receive.service.clusterIP	Thanos Ruler service clusterIP IP	""
receive.service.http.port	Service HTTP port	10902
receive.service.http.nodePort	Service HTTP node port	""
receive.service.targetPort	Service targetPort override	http
receive.service.grpc.port	Service GRPC port	10901
receive.service.grpc.nodePort	Service GRPC node port	""
receive.service.remoteWrite.port	Service remote write port	19291
receive.service.remoteWrite.nodePort	Service remote write node port	""
receive.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
receive.service.loadBalancerSourceRanges	Addresses that are allowed when service is LoadBalancer	[]
receive.service.externalTrafficPolicy	Thanos Ruler service externalTrafficPolicy	Cluster
receive.service.annotations	Annotations for Thanos Receive service	{}
receive.service.labelSelectorsOverride	Selector for Thanos receive service	{}
receive.service.additionalHeadless	Additional Headless service	false
receive.autoscaling.enabled	Enable autoscaling for Thanos Receive	false
receive.autoscaling.minReplicas	Minimum number of Thanos Receive replicas	""
receive.autoscaling.maxReplicas	Maximum number of Thanos Receive replicas	""
receive.autoscaling.targetCPU	Target CPU utilization percentage	""
receive.autoscaling.targetMemory	Target Memory utilization percentage	""
receive.persistence.enabled	Enable data persistence	true
receive.persistence.existingClaim	Use a existing PVC which must be created manually before bound	""
receive.persistence.storageClass	Specify the storageClass used to provision the volume	""
receive.persistence.accessModes	Access modes of data volume	[]
receive.persistence.size	Size of data volume	8Gi
receive.pdb.create	Enable/disable a Pod Disruption Budget creation	false
receive.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	1
receive.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
receive.ingress.enabled	Set to true to enable ingress record generation	false
receive.ingress.certManager	Set this to true in order to add the corresponding annotations for cert-manager	false
receive.ingress.hostname	When the ingress is enabled, a host pointing to this will be created	thanos-receive.local
receive.ingress.annotations	Ingress annotations done as key:value pairs	{}
receive.ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
receive.ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
receive.ingress.secrets	If you're providing your own certificates, please use this to add the certificates as secrets	[]
receive.ingress.tls	When specifying cert-manager.io/cluster-issuer: nameOfClusterIssuer annotation, enable tls for ingress	false
receive.ingress.apiVersion	Override API Version (automatically detected if not set)	""
receive.ingress.path	Ingress Path	/
receive.ingress.pathType	Ingress Path type	ImplementationSpecific

Metrics parameters

Name	Description	Value
metrics.enabled	Enable the export of Prometheus metrics	false
metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
metrics.serviceMonitor.labels	Additional labels for ServiceMonitor object	{}
metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
metrics.prometheusRule.enabled	If true, creates a Prometheus Operator PrometheusRule (also requires metrics.enabled to be true)	false
metrics.prometheusRule.namespace	Namespace in which the PrometheusRule CRD is created	""
metrics.prometheusRule.additionalLabels	Additional labels for the prometheusRule	{}
metrics.prometheusRule.rules	Prometheus Rules for Thanos components	[]

Volume Permissions parameters

Name	Description	Value
volumePermissions.enabled	Enable init container that changes the owner and group of the persistent volume(s) mountpoint to runAsUser:fsGroup	false
volumePermissions.image.registry	Init container volume-permissions image registry	docker.io
volumePermissions.image.repository	Init container volume-permissions image repository	bitnami/bitnami-shell
volumePermissions.image.tag	Init container volume-permissions image tag	10-debian-10-r159
volumePermissions.image.pullPolicy	Init container volume-permissions image pull policy	Always
volumePermissions.image.pullSecrets	Specify docker-registry secret names as an array	[]

MinIO® chart parameters

Name	Description	Value
minio.enabled	Enable/disable MinIO® chart installation	false
minio.accessKey.password	MinIO® Access Key	""
minio.secretKey.password	MinIO® Secret Key	""
minio.defaultBuckets	Comma, semi-colon or space separated list of MinIO® buckets to create	thanos

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release --set query.replicaCount=2 bitnami/thanos

The above command install Thanos chart with 2 Thanos Query replicas.

Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml bitnami/thanos

Tip

: You can use the default values.yaml

Configuration and installation details

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Adding extra flags

In case you want to add extra flags to any Thanos component, you can use XXX.extraFlags parameter(s), where XXX is placeholder you need to replace with the actual component(s). For instance, to add extra flags to Thanos Store Gateway, use:

storegateway:
  extraFlags:
    - --sync-block-duration=3m
    - --chunk-pool-size=2GB

This also works for multi-line flags. This can be useful when you want to configure caching for a particular component without using a configMap. For example, to configure the query-range response cache of the Thanos Query Frontend, use:

queryFrontend:
  extraFlags:
    - |
      --query-range.response-cache-config=
      type: MEMCACHED
      config:
        addresses:
          - <MEMCACHED_SERVER>:11211
        timeout: 500ms
        max_idle_connections: 100
        max_async_concurrency: 10
        max_async_buffer_size: 10000
        max_get_multi_concurrency: 100
        max_get_multi_batch_size: 0
        dns_provider_update_interval: 10s
        expiration: 24h

Using custom Objstore configuration

This helm chart supports using custom Objstore configuration.

You can specify the Objstore configuration using the objstoreConfig parameter.

In addition, you can also set an external Secret with the configuration file. This is done by setting the existingObjstoreSecret parameter. Note that this will override the previous option. If needed you can also provide a custom Secret Key with existingObjstoreSecretItems, please be aware that the Path of your Secret should be objstore.yml.

Using custom Query Service Discovery configuration

This helm chart supports using custom Service Discovery configuration for Query.

You can specify the Service Discovery configuration using the query.sdConfig parameter.

In addition, you can also set an external ConfigMap with the Service Discovery configuration file. This is done by setting the query.existingSDConfigmap parameter. Note that this will override the previous option.

Using custom Ruler configuration

This helm chart supports using custom Ruler configuration.

You can specify the Ruler configuration using the ruler.config parameter.

In addition, you can also set an external ConfigMap with the configuration file. This is done by setting the ruler.existingConfigmap parameter. Note that this will override the previous option.

Store time partitions

Thanos store supports partion based on time.

Setting time partitions will create N number of store statefulsets based on the number of items in the timePartitioning list. Each item must contain the min and max time for querying in the supported format (find more details at Thanos documentation).

Note: leaving the timePartitioning list empty ([]) will create a single store for all data.

For instance, to use 3 stores you can use a values.yaml like the one below:

timePartitioning:
  # One store for data older than 6 weeks
  - min: ""
    max: -6w
  # One store for data newer than 6 weeks and older than 2 weeks
  - min: -6w
    max: -2w
  # One store for data newer than 2 weeks
  - min: -2w
    max: ""

Integrate Thanos with Prometheus and Alertmanager

You can intregrate Thanos with Prometheus & Alertmanager using this chart and the Bitnami kube-prometheus chart following the steps below:

Note: in this example we will use MinIO® (subchart) as the Objstore. Every component will be deployed in the "monitoring" namespace.

• Create a values.yaml like the one below:

objstoreConfig: |-
  type: s3
  config:
    bucket: thanos
    endpoint: {{ include "thanos.minio.fullname" . }}.monitoring.svc.cluster.local:9000
    access_key: minio
    secret_key: minio123
    insecure: true
query:
  dnsDiscovery:
    sidecarsService: kube-prometheus-prometheus-thanos
    sidecarsNamespace: monitoring
bucketweb:
  enabled: true
compactor:
  enabled: true
storegateway:
  enabled: true
ruler:
  enabled: true
  alertmanagers:
    - http://kube-prometheus-alertmanager.monitoring.svc.cluster.local:9093
  config: |-
    groups:
      - name: "metamonitoring"
        rules:
          - alert: "PrometheusDown"
            expr: absent(up{prometheus="monitoring/kube-prometheus"})
metrics:
  enabled: true
  serviceMonitor:
    enabled: true
minio:
  enabled: true
  accessKey:
    password: "minio"
  secretKey:
    password: "minio123"
  defaultBuckets: "thanos"

• Install Prometheus Operator and Thanos charts:

For Helm 3:

kubectl create namespace monitoring
helm install kube-prometheus \
    --set prometheus.thanos.create=true \
    --namespace monitoring \
    bitnami/kube-prometheus
helm install thanos \
    --values values.yaml \
    --namespace monitoring \
    bitnami/thanos

That's all! Now you have Thanos fully integrated with Prometheus and Alertmanager.

Persistence

The data is persisted by default using PVC(s) on Thanos components. You can disable the persistence setting the XXX.persistence.enabled parameter(s) to false. A default StorageClass is needed in the Kubernetes cluster to dynamically provision the volumes. Specify another StorageClass in the XXX.persistence.storageClass parameter(s) or set XXX.persistence.existingClaim if you have already existing persistent volumes to use.

Note: you need to substitute the XXX placeholders above with the actual component(s) you want to configure.

Adjust permissions of persistent volume mountpoint

As the images run as non-root by default, it is necessary to adjust the ownership of the persistent volumes so that the containers can write data into it.

By default, the chart is configured to use Kubernetes Security Context to automatically change the ownership of the volumes. However, this feature does not work in all Kubernetes distributions. As an alternative, this chart supports using an initContainer to change the ownership of the volumes before mounting it in the final destination.

You can enable this initContainer by setting volumePermissions.enabled to true.

Setting Pod's affinity

This chart allows you to set your custom affinity using the XXX.affinity parameter(s). Find more information about Pod's affinity in the kubernetes documentation.

As an alternative, you can use of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the XXX.podAffinityPreset, XXX.podAntiAffinityPreset, or XXX.nodeAffinityPreset parameters.

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

Upgrading

To 5.3.0

This version introduces hash and time partitioning for the store gateway.

To 5.0.0

This major update changes the securityContext interface in the values.yaml file.

Please note if you have changes in the securityContext fields those need to be migrated to podSecurityContext.

# ...
- securityContext:
+ podSecurityContext:
# ...

Other than that a new securityContext interface for containers got introduced containerSecurityContext. It's default is enabled so if you do not need it you need to opt out of it.

# ...
+ containerSecurityContext
+   enabled: true  # opt out by enabled: false
+   capabilities:
+     drop:
+     - ALL
+   runAsNonRoot: true
+   allowPrivilegeEscalation: false
+   readOnlyRootFilesystem: false
# ...

To 4.0.0

This major updates the MinIO subchart to its newest major, 7.0.0, which removes previous configuration of securityContext and moves to podSecurityContext and containerSecurityContext.

To 3.3.0

This version introduces bitnami/common, a library chart as a dependency. More documentation about this new utility could be found here. Please, make sure that you have updated the chart dependencies before executing any upgrade.

To 3.1.0

The querier component and its settings have been renamed to query. Configuration of the query component by using keys under querier in your values.yaml will continue to work. Support for keys under querier will be dropped in a future release.

querier.enabled                               -> query.enabled
querier.logLevel                              -> query.logLevel
querier.replicaLabel                          -> query.replicaLabel
querier.dnsDiscovery.enabled                  -> query.dnsDiscovery.enabled
querier.dnsDiscovery.sidecarsService          -> query.dnsDiscovery.sidecarsService
querier.dnsDiscovery.sidecarsNamespace        -> query.dnsDiscovery.sidecarsNamespace
querier.stores                                -> query.stores
querier.sdConfig                              -> query.sdConfig
querier.existingSDConfigmap                   -> query.existingSDConfigmap
querier.extraFlags                            -> query.extraFlags
querier.replicaCount                          -> query.replicaCount
querier.strategyType                          -> query.strategyType
querier.affinity                              -> query.affinity
querier.nodeSelector                          -> query.nodeSelector
querier.tolerations                           -> query.tolerations
querier.podLabels                             -> query.podLabels
querier.priorityClassName                     -> query.priorityClassName
querier.securityContext.enabled               -> query.securityContext.enabled
querier.securityContext.fsGroup               -> query.securityContext.fsGroup
querier.securityContext.runAsUser             -> query.securityContext.runAsUser
querier.resources.limits                      -> query.resources.limits
querier.resources.requests                    -> query.resources.requests
querier.podAnnotations                        -> query.podAnnotations
querier.livenessProbe                         -> query.livenessProbe
querier.readinessProbe                        -> query.readinessProbe
querier.grpcTLS.server.secure                 -> query.grpcTLS.server.secure
querier.grpcTLS.server.cert                   -> query.grpcTLS.server.cert
querier.grpcTLS.server.key                    -> query.grpcTLS.server.key
querier.grpcTLS.server.ca                     -> query.grpcTLS.server.ca
querier.grpcTLS.client.secure                 -> query.grpcTLS.client.secure
querier.grpcTLS.client.cert                   -> query.grpcTLS.client.cert
querier.grpcTLS.client.key                    -> query.grpcTLS.client.key
querier.grpcTLS.client.ca                     -> query.grpcTLS.client.ca
querier.grpcTLS.client.servername             -> query.grpcTLS.client.servername
querier.service.type                          -> query.service.type
querier.service.clusterIP                     -> query.service.clusterIP
querier.service.http.port                     -> query.service.http.port
querier.service.http.nodePort                 -> query.service.http.nodePort
querier.service.grpc.port                     -> query.service.grpc.port
querier.service.grpc.nodePort                 -> query.service.grpc.nodePort
querier.service.loadBalancerIP                -> query.service.loadBalancerIP
querier.service.loadBalancerSourceRanges      -> query.service.loadBalancerSourceRanges
querier.service.annotations                   -> query.service.annotations
querier.service.labelSelectorsOverride        -> query.service.labelSelectorsOverride
querier.serviceAccount.annotations            -> query.serviceAccount.annotations
querier.rbac.create                           -> query.rbac.create
querier.pspEnabled                            -> query.pspEnabled
querier.autoscaling.enabled                   -> query.autoscaling.enabled
querier.autoscaling.minReplicas               -> query.autoscaling.minReplicas
querier.autoscaling.maxReplicas               -> query.autoscaling.maxReplicas
querier.autoscaling.targetCPU                 -> query.autoscaling.targetCPU
querier.autoscaling.targetMemory              -> query.autoscaling.targetMemory
querier.pdb.create                            -> query.pdb.create
querier.pdb.minAvailable                      -> query.pdb.minAvailable
querier.pdb.maxUnavailable                    -> query.pdb.maxUnavailable
querier.ingress.enabled                       -> query.ingress.enabled
querier.ingress.certManager                   -> query.ingress.certManager
querier.ingress.hostname                      -> query.ingress.hostname
querier.ingress.annotations                   -> query.ingress.annotations
querier.ingress.tls                           -> query.ingress.tls
querier.ingress.extraHosts[0].name            -> query.ingress.extraHosts[0].name
querier.ingress.extraHosts[0].path            -> query.ingress.extraHosts[0].path
querier.ingress.extraTls[0].hosts[0]          -> query.ingress.extraTls[0].hosts[0]
querier.ingress.extraTls[0].secretName        -> query.ingress.extraTls[0].secretName
querier.ingress.secrets[0].name               -> query.ingress.secrets[0].name
querier.ingress.secrets[0].certificate        -> query.ingress.secrets[0].certificate
querier.ingress.secrets[0].key                -> query.ingress.secrets[0].key
querier.ingress.grpc.enabled                  -> query.ingress.grpc.enabled
querier.ingress.grpc.certManager              -> query.ingress.grpc.certManager
querier.ingress.grpc.hostname                 -> query.ingress.grpc.hostname
querier.ingress.grpc.annotations              -> query.ingress.grpc.annotations
querier.ingress.grpc.extraHosts[0].name       -> query.ingress.grpc.extraHosts[0].name
querier.ingress.grpc.extraHosts[0].path       -> query.ingress.grpc.extraHosts[0].path
querier.ingress.grpc.extraTls[0].hosts[0]     -> query.ingress.grpc.extraTls[0].hosts[0]
querier.ingress.grpc.extraTls[0].secretName   -> query.ingress.grpc.extraTls[0].secretName
querier.ingress.grpc.secrets[0].name          -> query.ingress.grpc.secrets[0].name
querier.ingress.grpc.secrets[0].certificate   -> query.ingress.grpc.secrets[0].certificate
querier.ingress.grpc.secrets[0].key           -> query.ingress.grpc.secrets[0].key

To 3.0.0

On November 13, 2020, Helm v2 support was formally finished, this major version is the result of the required changes applied to the Helm Chart to be able to incorporate the different features added in Helm v3 and to be consistent with the Helm project itself regarding the Helm v2 EOL.

What changes were introduced in this major version?

• Previous versions of this Helm Chart use apiVersion: v1 (installable by both Helm 2 and 3), this Helm Chart was updated to apiVersion: v2 (installable by Helm 3 only). Here you can find more information about the apiVersion field.
• Move dependency information from the requirements.yaml to the Chart.yaml
• After running helm dependency update, a Chart.lock file is generated containing the same structure used in the previous requirements.lock
• The different fields present in the Chart.yaml file has been ordered alphabetically in a homogeneous way for all the Bitnami Helm Charts

Considerations when upgrading to this version

• If you want to upgrade to this version from a previous one installed with Helm v3, you shouldn't face any issues
• If you want to upgrade to this version using Helm v2, this scenario is not supported as this version doesn't support Helm v2 anymore
• If you installed the previous version with Helm v2 and wants to upgrade to this version with Helm v3, please refer to the official Helm documentation about migrating from Helm v2 to v3

Useful links

• https://docs.bitnami.com/tutorials/resolve-helm2-helm3-post-migration-issues/
• https://helm.sh/docs/topics/v2_v3_migration/
• https://helm.sh/blog/migrate-from-helm-v2-to-helm-v3/

To 2.4.0

The Ingress API object name for Querier changes from:

{{ include "common.names.fullname" . }}

Note

: Which in most cases (depending on any set values in fullnameOverride or nameOverride) resolves to the used Helm release name (.Release.Name).

To:

{{ include "common.names.fullname" . }}-querier

To 2.0.0

The format of the chart's extraFlags option has been updated to be an array (instead of an object), to support passing multiple flags with the same name to Thanos.

Now you need to specify the flags in the following way in your values file (where component is one of querier/bucketweb/compactor/storegateway/ruler):

component:
  ...
  extraFlags
    - --sync-block-duration=3m
    - --chunk-pool-size=2GB

To specify the values via CLI::

--set 'component.extraFlags[0]=--sync-block-duration=3m' --set 'ruler.extraFlags[1]=--chunk-pool-size=2GB'

To 1.0.0

If you are upgrading from a <1.0.0 release you need to move your Querier Ingress information to the new values settings:

ingress.enabled -> querier.ingress.enabled
ingress.certManager -> querier.ingress.certManager
ingress.hostname -> querier.ingress.hostname
ingress.annotations -> querier.ingress.annotations
ingress.extraHosts[0].name -> querier.ingress.extraHosts[0].name
ingress.extraHosts[0].path -> querier.ingress.extraHosts[0].path
ingress.extraHosts[0].hosts[0] -> querier.ingress.extraHosts[0].hosts[0]
ingress.extraHosts[0].secretName -> querier.ingress.extraHosts[0].secretName
ingress.secrets[0].name -> querier.ingress.secrets[0].name
ingress.secrets[0].certificate -> querier.ingress.secrets[0].certificate
ingress.secrets[0].key -> querier.ingress.secrets[0].key