charts/bitnami/victoriametrics

Bitnami package for VictoriaMetrics

VictoriaMetrics is a fast, cost-effective, and scalable monitoring solution and time series database, compatible with Prometheus and Graphite

Overview of VictoriaMetrics

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://registry-1.docker.io/bitnamicharts/victoriametrics

Looking to use VictoriaMetrics in production? Try VMware Tanzu Application Catalog, the commercial edition of the Bitnami catalog.

Introduction

This chart bootstraps a VictoriaMetrics deployment on a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/victoriametrics

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The command deploys VictoriaMetrics on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip

: List all releases using helm list

Configuration and installation details

Available VictoriaMetrics components

The VictoriaMetrics chart always deploys the vminsert, vmstorage and vmselect components, as part of the basic open-source VictoriaMetrics cluster installation. Additionally, it is possible to deploy the vmauth, vmalert or vmagent components by setting vmauth.enabled=true, vmagent.enabled=true or vmalert.enabled=true.

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcesPreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Backup and restore

To back up and restore Helm chart deployments on Kubernetes, you need to back up the persistent volumes from the source deployment and attach them to a new deployment using Velero, a Kubernetes backup/restore tool. Find the instructions for using Velero in this guide.

Prometheus metrics

This chart can be integrated with Prometheus by setting *.metrics.enabled (under the vminsert, vmselect, vmstorage, vmagent, vmalert and vmauth sections) to true. This will expose VictoriaMetrics native Prometheus ports in the containers. Additionally, it will deploy several metrics services, which can be configured under the *.metrics.service section (under the vminsert, vmselect, vmstorage, vmagent, vmalert and vmauth sections). These metrics services will have the necessary annotations to be automatically scraped by Prometheus.

Prometheus requirements

It is necessary to have a working installation of Prometheus or Prometheus Operator for the integration to work. Install the Bitnami Prometheus helm chart or the Bitnami Kube Prometheus helm chart to easily have a working Prometheus in your cluster.

Integration with Prometheus Operator

The chart can deploy ServiceMonitor objects for integration with Prometheus Operator installations. To do so, set the value *.metrics.serviceMonitor.enabled=true (vminsert, vmselect, vmstorage, vmagent, vmalert and vmauth). Ensure that the Prometheus Operator CustomResourceDefinitions are installed in the cluster or it will fail with the following error:

no matches for kind "ServiceMonitor" in version "monitoring.coreos.com/v1"

Install the Bitnami Kube Prometheus helm chart for having the necessary CRDs and the Prometheus Operator.

Ingress

This chart provides support for Ingress resources. If you have an ingress controller installed on your cluster, such as nginx-ingress-controller or contour you can utilize the ingress controller to serve your application.To enable Ingress integration, set *.ingress.enabled (under the vmselect, vmauth and vmselect sections) to true.

The most common scenario is to have one host name mapped to the deployment. In this case, the *.ingress.hostname (under the vmselect, vmauth and vmselect sections) property can be used to set the host name. The *.ingress.tls parameter can be used to add the TLS configuration for this host.

However, it is also possible to have more than one host. To facilitate this, the *.ingress.extraHosts parameter (if available) can be set with the host names specified as an array. The *.ingress.extraTLS (under the vmselect, vmauth and vmselect sections) parameter (if available) can also be used to add the TLS configuration for extra hosts.

NOTE: For each host specified in the *.ingress.extraHosts (under the vmselect, vmauth and vmselect sections) parameter, it is necessary to set a name, path, and any annotations that the Ingress controller should know about. Not all annotations are supported by all Ingress controllers, but this annotation reference document lists the annotations supported by many popular Ingress controllers.

Adding the TLS parameter (where available) will cause the chart to generate HTTPS URLs, and the application will be available on port 443. The actual TLS secrets do not have to be generated by this chart. However, if TLS is enabled, the Ingress record will not work until the TLS secret exists.

Learn more about Ingress controllers.

Securing traffic using TLS

This chart facilitates the creation of TLS secrets for use with the Ingress controller (although this is not mandatory). There are several common use cases:

• Generate certificate secrets based on chart parameters.
• Enable externally generated certificates.
• Manage application certificates via an external service (like cert-manager).
• Create self-signed certificates within the chart (if supported).

In the first two cases, a certificate and a key are needed. Files are expected in .pem format.

Here is an example of a certificate file:

NOTE: There may be more than one certificate if there is a certificate chain.

-----BEGIN CERTIFICATE-----
MIID6TCCAtGgAwIBAgIJAIaCwivkeB5EMA0GCSqGSIb3DQEBCwUAMFYxCzAJBgNV
...
jScrvkiBO65F46KioCL9h5tDvomdU1aqpI/CBzhvZn1c0ZTf87tGQR8NK7v7
-----END CERTIFICATE-----

Here is an example of a certificate key:

-----BEGIN RSA PRIVATE KEY-----
MIIEogIBAAKCAQEAvLYcyu8f3skuRyUgeeNpeDvYBCDcgq+LsWap6zbX5f8oLqp4
...
wrj2wDbCDCFmfqnSJ+dKI3vFLlEz44sAV8jX/kd4Y6ZTQhlLbYc=
-----END RSA PRIVATE KEY-----

• If using Helm to manage the certificates based on the parameters, copy these values into the certificate and key values for a given *.ingress.secrets (under the vmselect, vmauth and vmselect sections) entry.
• If managing TLS secrets separately, it is necessary to create a TLS secret with name INGRESS_HOSTNAME-tls (where INGRESS_HOSTNAME is a placeholder to be replaced with the hostname you set using the *.ingress.hostname (under the vmselect, vmauth and vmselect sections) parameter).
• If your cluster has a cert-manager add-on to automate the management and issuance of TLS certificates, add to *.ingress.annotations (under the vmselect, vmauth and vmselect sections) the corresponding ones for cert-manager.
• If using self-signed certificates created by Helm, set both *.ingress.tls and *.ingress.selfSigned (under the vmselect, vmauth and vmselect sections) to true.

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.defaultStorageClass	Global default StorageClass for Persistent Volume(s)	""
global.security.allowInsecureImages	Allows skipping image verification	false
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common parameters

Name	Description	Value
kubeVersion	Override Kubernetes version	""
apiVersions	Override Kubernetes API versions reported by .Capabilities	[]
nameOverride	String to partially override common.names.name	""
fullnameOverride	String to fully override common.names.fullname	""
namespaceOverride	String to fully override common.names.namespace	""
commonLabels	Labels to add to all deployed objects	{}
commonAnnotations	Annotations to add to all deployed objects	{}
clusterDomain	Kubernetes cluster domain name	cluster.local
extraDeploy	Array of extra objects to deploy with the release	[]

VictoriaMetrics common parameters

Name	Description	Value
envflagEnable	Enable envflag	true
envflagPrefix	Prefix used for the envflag entries	VM_
loggerFormat	Set format of the logs	json

VictoriaMetrics Select Parameters

Name	Description	Value
vmselect.image.registry	VictoriaMetrics Select image registry	REGISTRY_NAME
vmselect.image.repository	VictoriaMetrics Select image repository	REPOSITORY_NAME/victoriametrics-vmselect
vmselect.image.digest	VictoriaMetrics Select image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)	""
vmselect.image.pullPolicy	VictoriaMetrics Select image pull policy	IfNotPresent
vmselect.image.pullSecrets	VictoriaMetrics Select image pull secrets	[]
vmselect.replicaCount	Number of VictoriaMetrics Select replicas to deploy	1
vmselect.containerPorts.http	VictoriaMetrics Select http container port	8481
vmselect.livenessProbe.enabled	Enable livenessProbe on VictoriaMetrics Select containers	true
vmselect.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
vmselect.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
vmselect.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
vmselect.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
vmselect.livenessProbe.successThreshold	Success threshold for livenessProbe	1
vmselect.readinessProbe.enabled	Enable readinessProbe on VictoriaMetrics Select containers	true
vmselect.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
vmselect.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
vmselect.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
vmselect.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
vmselect.readinessProbe.successThreshold	Success threshold for readinessProbe	1
vmselect.startupProbe.enabled	Enable startupProbe on VictoriaMetrics Select containers	false
vmselect.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
vmselect.startupProbe.periodSeconds	Period seconds for startupProbe	10
vmselect.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
vmselect.startupProbe.failureThreshold	Failure threshold for startupProbe	5
vmselect.startupProbe.successThreshold	Success threshold for startupProbe	1
vmselect.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
vmselect.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
vmselect.customStartupProbe	Custom startupProbe that overrides the default one	{}
vmselect.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if vmselect.resources is set (vmselect.resources is recommended for production).	nano
vmselect.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
vmselect.kind	Define how to deploy VictoriaMetrics Select (allowed values: deployment or statefulset)	deployment
vmselect.podManagementPolicy	Pod management policy for VictoriaMetrics Storage statefulset	Parallel
vmselect.annotations	Annotations for VictoriaMetrics Select Deployment or StatefulSet	{}
vmselect.podSecurityContext.enabled	Enabled VictoriaMetrics Select pods' Security Context	true
vmselect.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
vmselect.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
vmselect.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
vmselect.podSecurityContext.fsGroup	Set VictoriaMetrics Select pod's Security Context fsGroup	1001
vmselect.containerSecurityContext.enabled	Enabled VictoriaMetrics Select containers' Security Context	true
vmselect.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
vmselect.containerSecurityContext.runAsUser	Set containers' Security Context runAsUser	1001
vmselect.containerSecurityContext.runAsGroup	Set containers' Security Context runAsGroup	1001
vmselect.containerSecurityContext.runAsNonRoot	Set VictoriaMetrics Select containers' Security Context runAsNonRoot	true
vmselect.containerSecurityContext.privileged	Set VictoriaMetrics Select containers' Security Context privileged	false
vmselect.containerSecurityContext.readOnlyRootFilesystem	Set VictoriaMetrics Select containers' Security Context runAsNonRoot	true
vmselect.containerSecurityContext.allowPrivilegeEscalation	Set VictoriaMetrics Select container's privilege escalation	false
vmselect.containerSecurityContext.capabilities.drop	Set VictoriaMetrics Select container's Security Context runAsNonRoot	["ALL"]
vmselect.containerSecurityContext.seccompProfile.type	Set VictoriaMetrics Select container's Security Context seccomp profile	RuntimeDefault
vmselect.command	Override default container command (useful when using custom images)	[]
vmselect.args	Override default container args (useful when using custom images)	[]
vmselect.extraArgs	Add extra arguments to the default command	[]
vmselect.automountServiceAccountToken	Mount Service Account token in pod	false
vmselect.hostAliases	VictoriaMetrics Select pods host aliases	[]
vmselect.podLabels	Extra labels for VictoriaMetrics Select pods	{}
vmselect.podAnnotations	Annotations for VictoriaMetrics Select pods	{}
vmselect.podAffinityPreset	Pod affinity preset. Ignored if vmselect.affinity is set. Allowed values: soft or hard	""
vmselect.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if vmselect.affinity is set. Allowed values: soft or hard	soft
vmselect.pdb.create	Enable/disable a Pod Disruption Budget creation	true
vmselect.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
vmselect.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
vmselect.autoscaling.vpa.enabled	Enable VPA for VictoriaMetrics Select pods	false
vmselect.autoscaling.vpa.annotations	Annotations for VPA resource	{}
vmselect.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
vmselect.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
vmselect.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
vmselect.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy	Auto
vmselect.autoscaling.hpa.enabled	Enable HPA for VictoriaMetrics Select pods	false
vmselect.autoscaling.hpa.minReplicas	Minimum number of replicas	""
vmselect.autoscaling.hpa.maxReplicas	Maximum number of replicas	""
vmselect.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
vmselect.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""
vmselect.nodeAffinityPreset.type	Node affinity preset type. Ignored if vmselect.affinity is set. Allowed values: soft or hard	""
vmselect.nodeAffinityPreset.key	Node label key to match. Ignored if vmselect.affinity is set	""
vmselect.nodeAffinityPreset.values	Node label values to match. Ignored if vmselect.affinity is set	[]
vmselect.affinity	Affinity for VictoriaMetrics Select pods assignment	{}
vmselect.nodeSelector	Node labels for VictoriaMetrics Select pods assignment	{}
vmselect.tolerations	Tolerations for VictoriaMetrics Select pods assignment	[]
vmselect.updateStrategy.type	VictoriaMetrics Select statefulset strategy type	RollingUpdate
vmselect.priorityClassName	VictoriaMetrics Select pods' priorityClassName	""
vmselect.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
vmselect.schedulerName	Name of the k8s scheduler (other than default) for VictoriaMetrics Select pods	""
vmselect.terminationGracePeriodSeconds	Seconds Redmine pod needs to terminate gracefully	""
vmselect.lifecycleHooks	for the VictoriaMetrics Select container(s) to automate configuration before or after startup	{}
vmselect.extraEnvVars	Array with extra environment variables to add to VictoriaMetrics Select nodes	[]
vmselect.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for VictoriaMetrics Select nodes	""
vmselect.extraEnvVarsSecret	Name of existing Secret containing extra env vars for VictoriaMetrics Select nodes	""
vmselect.extraVolumes	Optionally specify extra list of additional volumes for the VictoriaMetrics Select pod(s)	[]
vmselect.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the VictoriaMetrics Select container(s)	[]
vmselect.sidecars	Add additional sidecar containers to the VictoriaMetrics Select pod(s)	[]
vmselect.initContainers	Add additional init containers to the VictoriaMetrics Select pod(s)	[]

VictoriaMetrics Select RBAC Parameters

Name	Description	Value
vmselect.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
vmselect.serviceAccount.name	The name of the ServiceAccount to use.	""
vmselect.serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
vmselect.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false

VictoriaMetrics Select Traffic Exposure Parameters

Name	Description	Value
vmselect.service.type	VictoriaMetrics Select service type	ClusterIP
vmselect.service.ports.http	VictoriaMetrics Select service http port	8481
vmselect.service.nodePorts.http	Node port for HTTP	""
vmselect.service.clusterIP	VictoriaMetrics Select service Cluster IP	""
vmselect.service.loadBalancerIP	VictoriaMetrics Select service Load Balancer IP	""
vmselect.service.loadBalancerSourceRanges	VictoriaMetrics Select service Load Balancer sources	[]
vmselect.service.externalTrafficPolicy	VictoriaMetrics Select service external traffic policy	Cluster
vmselect.service.annotations	Additional custom annotations for VictoriaMetrics Select service	{}
vmselect.service.extraPorts	Extra ports to expose in VictoriaMetrics Select service (normally used with the sidecars value)	[]
vmselect.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
vmselect.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
vmselect.service.headless.annotations	Annotations for the headless service.	{}
vmselect.ingress.enabled	Enable ingress record generation for VictoriaMetrics Select	false
vmselect.ingress.pathType	Ingress path type	ImplementationSpecific
vmselect.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
vmselect.ingress.hostname	Default host for the ingress record	vmselect.local
vmselect.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
vmselect.ingress.path	Default path for the ingress record	/
vmselect.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
vmselect.ingress.tls	Enable TLS configuration for the host defined at vmselect.ingress.hostname parameter	false
vmselect.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
vmselect.ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
vmselect.ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
vmselect.ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
vmselect.ingress.secrets	Custom TLS certificates as secrets	[]
vmselect.ingress.extraRules	Additional rules to be covered with this ingress record	[]
vmselect.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
vmselect.networkPolicy.allowExternal	Don't require server label for connections	true
vmselect.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
vmselect.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
vmselect.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
vmselect.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
vmselect.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

VictoriaMetrics Select Metrics Parameters

Name	Description	Value
vmselect.metrics.enabled	Enable the export of Prometheus metrics	false
vmselect.metrics.annotations	Additional custom annotations for the service	{}
vmselect.metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
vmselect.metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
vmselect.metrics.serviceMonitor.annotations	Additional custom annotations for the ServiceMonitor	{}
vmselect.metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
vmselect.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in Prometheus	""
vmselect.metrics.serviceMonitor.honorLabels	honorLabels chooses the metric's labels on collisions with target labels	false
vmselect.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
vmselect.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
vmselect.metrics.serviceMonitor.metricRelabelings	Specify additional relabeling of metrics	[]
vmselect.metrics.serviceMonitor.relabelings	Specify general relabeling	[]
vmselect.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}

VictoriaMetrics Insert Parameters

Name	Description	Value
vminsert.image.registry	VictoriaMetrics Insert image registry	REGISTRY_NAME
vminsert.image.repository	VictoriaMetrics Insert image repository	REPOSITORY_NAME/victoriametrics-vminsert
vminsert.image.digest	VictoriaMetrics Insert image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)	""
vminsert.image.pullPolicy	VictoriaMetrics Insert image pull policy	IfNotPresent
vminsert.image.pullSecrets	VictoriaMetrics Insert image pull secrets	[]
vminsert.replicaCount	Number of VictoriaMetrics Insert replicas to deploy	1
vminsert.containerPorts.http	VictoriaMetrics Insert http container port	8480
vminsert.livenessProbe.enabled	Enable livenessProbe on VictoriaMetrics Insert containers	true
vminsert.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
vminsert.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
vminsert.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
vminsert.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
vminsert.livenessProbe.successThreshold	Success threshold for livenessProbe	1
vminsert.readinessProbe.enabled	Enable readinessProbe on VictoriaMetrics Insert containers	true
vminsert.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
vminsert.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
vminsert.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
vminsert.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
vminsert.readinessProbe.successThreshold	Success threshold for readinessProbe	1
vminsert.startupProbe.enabled	Enable startupProbe on VictoriaMetrics Insert containers	false
vminsert.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
vminsert.startupProbe.periodSeconds	Period seconds for startupProbe	10
vminsert.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
vminsert.startupProbe.failureThreshold	Failure threshold for startupProbe	5
vminsert.startupProbe.successThreshold	Success threshold for startupProbe	1
vminsert.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
vminsert.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
vminsert.customStartupProbe	Custom startupProbe that overrides the default one	{}
vminsert.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if vminsert.resources is set (vminsert.resources is recommended for production).	nano
vminsert.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
vminsert.deploymentAnnotations	Annotations for VictoriaMetrics Insert Deployment	{}
vminsert.podSecurityContext.enabled	Enabled VictoriaMetrics Insert pods' Security Context	true
vminsert.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
vminsert.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
vminsert.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
vminsert.podSecurityContext.fsGroup	Set VictoriaMetrics Insert pod's Security Context fsGroup	1001
vminsert.containerSecurityContext.enabled	Enabled VictoriaMetrics Insert containers' Security Context	true
vminsert.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
vminsert.containerSecurityContext.runAsUser	Set containers' Security Context runAsUser	1001
vminsert.containerSecurityContext.runAsGroup	Set containers' Security Context runAsGroup	1001
vminsert.containerSecurityContext.runAsNonRoot	Set VictoriaMetrics Insert containers' Security Context runAsNonRoot	true
vminsert.containerSecurityContext.privileged	Set VictoriaMetrics Insert containers' Security Context privileged	false
vminsert.containerSecurityContext.readOnlyRootFilesystem	Set VictoriaMetrics Insert containers' Security Context runAsNonRoot	true
vminsert.containerSecurityContext.allowPrivilegeEscalation	Set VictoriaMetrics Insert container's privilege escalation	false
vminsert.containerSecurityContext.capabilities.drop	Set VictoriaMetrics Insert container's Security Context runAsNonRoot	["ALL"]
vminsert.containerSecurityContext.seccompProfile.type	Set VictoriaMetrics Insert container's Security Context seccomp profile	RuntimeDefault
vminsert.command	Override default container command (useful when using custom images)	[]
vminsert.args	Override default container args (useful when using custom images)	[]
vminsert.extraArgs	Add extra arguments to the default command	[]
vminsert.automountServiceAccountToken	Mount Service Account token in pod	false
vminsert.hostAliases	VictoriaMetrics Insert pods host aliases	[]
vminsert.podLabels	Extra labels for VictoriaMetrics Insert pods	{}
vminsert.podAnnotations	Annotations for VictoriaMetrics Insert pods	{}
vminsert.podAffinityPreset	Pod affinity preset. Ignored if vminsert.affinity is set. Allowed values: soft or hard	""
vminsert.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if vminsert.affinity is set. Allowed values: soft or hard	soft
vminsert.pdb.create	Enable/disable a Pod Disruption Budget creation	true
vminsert.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
vminsert.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
vminsert.autoscaling.vpa.enabled	Enable VPA for VictoriaMetrics Insert pods	false
vminsert.autoscaling.vpa.annotations	Annotations for VPA resource	{}
vminsert.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
vminsert.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
vminsert.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
vminsert.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy	Auto
vminsert.autoscaling.hpa.enabled	Enable HPA for VictoriaMetrics Insert pods	false
vminsert.autoscaling.hpa.minReplicas	Minimum number of replicas	""
vminsert.autoscaling.hpa.maxReplicas	Maximum number of replicas	""
vminsert.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
vminsert.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""
vminsert.nodeAffinityPreset.type	Node affinity preset type. Ignored if vminsert.affinity is set. Allowed values: soft or hard	""
vminsert.nodeAffinityPreset.key	Node label key to match. Ignored if vminsert.affinity is set	""
vminsert.nodeAffinityPreset.values	Node label values to match. Ignored if vminsert.affinity is set	[]
vminsert.affinity	Affinity for VictoriaMetrics Insert pods assignment	{}
vminsert.nodeSelector	Node labels for VictoriaMetrics Insert pods assignment	{}
vminsert.tolerations	Tolerations for VictoriaMetrics Insert pods assignment	[]
vminsert.updateStrategy.type	VictoriaMetrics Insert statefulset strategy type	RollingUpdate
vminsert.priorityClassName	VictoriaMetrics Insert pods' priorityClassName	""
vminsert.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
vminsert.schedulerName	Name of the k8s scheduler (other than default) for VictoriaMetrics Insert pods	""
vminsert.terminationGracePeriodSeconds	Seconds Redmine pod needs to terminate gracefully	""
vminsert.lifecycleHooks	for the VictoriaMetrics Insert container(s) to automate configuration before or after startup	{}
vminsert.extraEnvVars	Array with extra environment variables to add to VictoriaMetrics Insert nodes	[]
vminsert.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for VictoriaMetrics Insert nodes	""
vminsert.extraEnvVarsSecret	Name of existing Secret containing extra env vars for VictoriaMetrics Insert nodes	""
vminsert.extraVolumes	Optionally specify extra list of additional volumes for the VictoriaMetrics Insert pod(s)	[]
vminsert.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the VictoriaMetrics Insert container(s)	[]
vminsert.sidecars	Add additional sidecar containers to the VictoriaMetrics Insert pod(s)	[]
vminsert.initContainers	Add additional init containers to the VictoriaMetrics Insert pod(s)	[]
vminsert.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
vminsert.serviceAccount.name	The name of the ServiceAccount to use.	""
vminsert.serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
vminsert.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false

VictoriaMetrics Insert Traffic Exposure Parameters

Name	Description	Value
vminsert.service.type	VictoriaMetrics Insert service type	ClusterIP
vminsert.service.ports.http	VictoriaMetrics Insert service http port	8480
vminsert.service.nodePorts.http	Node port for HTTP	""
vminsert.service.clusterIP	VictoriaMetrics Insert service Cluster IP	""
vminsert.service.loadBalancerIP	VictoriaMetrics Insert service Load Balancer IP	""
vminsert.service.loadBalancerSourceRanges	VictoriaMetrics Insert service Load Balancer sources	[]
vminsert.service.externalTrafficPolicy	VictoriaMetrics Insert service external traffic policy	Cluster
vminsert.service.annotations	Additional custom annotations for VictoriaMetrics Insert service	{}
vminsert.service.extraPorts	Extra ports to expose in VictoriaMetrics Insert service (normally used with the sidecars value)	[]
vminsert.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
vminsert.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
vminsert.ingress.enabled	Enable ingress record generation for VictoriaMetrics Insert	false
vminsert.ingress.pathType	Ingress path type	ImplementationSpecific
vminsert.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
vminsert.ingress.hostname	Default host for the ingress record	vminsert.local
vminsert.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
vminsert.ingress.path	Default path for the ingress record	/
vminsert.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
vminsert.ingress.tls	Enable TLS configuration for the host defined at vminsert.ingress.hostname parameter	false
vminsert.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
vminsert.ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
vminsert.ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
vminsert.ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
vminsert.ingress.secrets	Custom TLS certificates as secrets	[]
vminsert.ingress.extraRules	Additional rules to be covered with this ingress record	[]
vminsert.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
vminsert.networkPolicy.allowExternal	Don't require server label for connections	true
vminsert.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
vminsert.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
vminsert.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
vminsert.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
vminsert.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

VictoriaMetrics Insert Metrics Parameters

Name	Description	Value
vminsert.metrics.enabled	Enable the export of Prometheus metrics	false
vminsert.metrics.annotations	Additional custom annotations for the service	{}
vminsert.metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
vminsert.metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
vminsert.metrics.serviceMonitor.annotations	Additional custom annotations for the ServiceMonitor	{}
vminsert.metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
vminsert.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in Prometheus	""
vminsert.metrics.serviceMonitor.honorLabels	honorLabels chooses the metric's labels on collisions with target labels	false
vminsert.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
vminsert.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
vminsert.metrics.serviceMonitor.metricRelabelings	Specify additional relabeling of metrics	[]
vminsert.metrics.serviceMonitor.relabelings	Specify general relabeling	[]
vminsert.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}

VictoriaMetrics Storage Parameters

Name	Description	Value
vmstorage.image.registry	VictoriaMetrics Storage image registry	REGISTRY_NAME
vmstorage.image.repository	VictoriaMetrics Storage image repository	REPOSITORY_NAME/victoriametrics-vmstorage
vmstorage.image.digest	VictoriaMetrics Storage image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)	""
vmstorage.image.pullPolicy	VictoriaMetrics Storage image pull policy	IfNotPresent
vmstorage.image.pullSecrets	VictoriaMetrics Storage image pull secrets	[]
vmstorage.replicaCount	Number of VictoriaMetrics Storage replicas to deploy	1
vmstorage.containerPorts.http	VictoriaMetrics Storage http container port	8482
vmstorage.containerPorts.vmselect	VictoriaMetrics Storage vmselect container port	8401
vmstorage.containerPorts.vminsert	VictoriaMetrics Storage vminsert container port	8400
vmstorage.livenessProbe.enabled	Enable livenessProbe on VictoriaMetrics Storage containers	true
vmstorage.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
vmstorage.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
vmstorage.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
vmstorage.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
vmstorage.livenessProbe.successThreshold	Success threshold for livenessProbe	1
vmstorage.readinessProbe.enabled	Enable readinessProbe on VictoriaMetrics Storage containers	true
vmstorage.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
vmstorage.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
vmstorage.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
vmstorage.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
vmstorage.readinessProbe.successThreshold	Success threshold for readinessProbe	1
vmstorage.startupProbe.enabled	Enable startupProbe on VictoriaMetrics Storage containers	false
vmstorage.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
vmstorage.startupProbe.periodSeconds	Period seconds for startupProbe	10
vmstorage.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
vmstorage.startupProbe.failureThreshold	Failure threshold for startupProbe	5
vmstorage.startupProbe.successThreshold	Success threshold for startupProbe	1
vmstorage.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
vmstorage.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
vmstorage.customStartupProbe	Custom startupProbe that overrides the default one	{}
vmstorage.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if vmstorage.resources is set (vmstorage.resources is recommended for production).	small
vmstorage.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
vmstorage.retentionPeriod	Data retention period	1
vmstorage.statefulsetAnnotations	Annotations for VictoriaMetrics Storage statefulset	{}
vmstorage.podSecurityContext.enabled	Enabled VictoriaMetrics Storage pods' Security Context	true
vmstorage.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
vmstorage.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
vmstorage.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
vmstorage.podSecurityContext.fsGroup	Set VictoriaMetrics Storage pod's Security Context fsGroup	1001
vmstorage.containerSecurityContext.enabled	Enabled VictoriaMetrics Storage containers' Security Context	true
vmstorage.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
vmstorage.containerSecurityContext.runAsUser	Set containers' Security Context runAsUser	1001
vmstorage.containerSecurityContext.runAsGroup	Set containers' Security Context runAsGroup	1001
vmstorage.containerSecurityContext.runAsNonRoot	Set VictoriaMetrics Storage containers' Security Context runAsNonRoot	true
vmstorage.containerSecurityContext.privileged	Set VictoriaMetrics Storage containers' Security Context privileged	false
vmstorage.containerSecurityContext.readOnlyRootFilesystem	Set VictoriaMetrics Storage containers' Security Context runAsNonRoot	true
vmstorage.containerSecurityContext.allowPrivilegeEscalation	Set VictoriaMetrics Storage container's privilege escalation	false
vmstorage.containerSecurityContext.capabilities.drop	Set VictoriaMetrics Storage container's Security Context runAsNonRoot	["ALL"]
vmstorage.containerSecurityContext.seccompProfile.type	Set VictoriaMetrics Storage container's Security Context seccomp profile	RuntimeDefault
vmstorage.command	Override default container command (useful when using custom images)	[]
vmstorage.args	Override default container args (useful when using custom images)	[]
vmstorage.extraArgs	Add extra arguments to the default command	[]
vmstorage.automountServiceAccountToken	Mount Service Account token in pod	false
vmstorage.hostAliases	VictoriaMetrics Storage pods host aliases	[]
vmstorage.podLabels	Extra labels for VictoriaMetrics Storage pods	{}
vmstorage.podAnnotations	Annotations for VictoriaMetrics Storage pods	{}
vmstorage.podAffinityPreset	Pod affinity preset. Ignored if vmstorage.affinity is set. Allowed values: soft or hard	""
vmstorage.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if vmstorage.affinity is set. Allowed values: soft or hard	soft
vmstorage.pdb.create	Enable/disable a Pod Disruption Budget creation	true
vmstorage.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
vmstorage.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
vmstorage.autoscaling.vpa.enabled	Enable VPA for VictoriaMetrics Storage pods	false
vmstorage.autoscaling.vpa.annotations	Annotations for VPA resource	{}
vmstorage.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
vmstorage.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
vmstorage.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
vmstorage.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy	Auto
vmstorage.autoscaling.hpa.enabled	Enable HPA for VictoriaMetrics Storage pods	false
vmstorage.autoscaling.hpa.minReplicas	Minimum number of replicas	""
vmstorage.autoscaling.hpa.maxReplicas	Maximum number of replicas	""
vmstorage.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
vmstorage.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""
vmstorage.nodeAffinityPreset.type	Node affinity preset type. Ignored if vmstorage.affinity is set. Allowed values: soft or hard	""
vmstorage.nodeAffinityPreset.key	Node label key to match. Ignored if vmstorage.affinity is set	""
vmstorage.nodeAffinityPreset.values	Node label values to match. Ignored if vmstorage.affinity is set	[]
vmstorage.affinity	Affinity for VictoriaMetrics Storage pods assignment	{}
vmstorage.nodeSelector	Node labels for VictoriaMetrics Storage pods assignment	{}
vmstorage.podManagementPolicy	Pod management policy for VictoriaMetrics Storage statefulset	Parallel
vmstorage.tolerations	Tolerations for VictoriaMetrics Storage pods assignment	[]
vmstorage.updateStrategy.type	VictoriaMetrics Storage statefulset strategy type	RollingUpdate
vmstorage.priorityClassName	VictoriaMetrics Storage pods' priorityClassName	""
vmstorage.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
vmstorage.schedulerName	Name of the k8s scheduler (other than default) for VictoriaMetrics Storage pods	""
vmstorage.terminationGracePeriodSeconds	Seconds Redmine pod needs to terminate gracefully	""
vmstorage.lifecycleHooks	for the VictoriaMetrics Storage container(s) to automate configuration before or after startup	{}
vmstorage.extraEnvVars	Array with extra environment variables to add to VictoriaMetrics Storage nodes	[]
vmstorage.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for VictoriaMetrics Storage nodes	""
vmstorage.extraEnvVarsSecret	Name of existing Secret containing extra env vars for VictoriaMetrics Storage nodes	""
vmstorage.extraVolumes	Optionally specify extra list of additional volumes for the VictoriaMetrics Storage pod(s)	[]
vmstorage.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the VictoriaMetrics Storage container(s)	[]
vmstorage.sidecars	Add additional sidecar containers to the VictoriaMetrics Storage pod(s)	[]
vmstorage.initContainers	Add additional init containers to the VictoriaMetrics Storage pod(s)	[]
vmstorage.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
vmstorage.serviceAccount.name	The name of the ServiceAccount to use.	""
vmstorage.serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
vmstorage.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false

VictoriaMetrics Storage Traffic Exposure Parameters

Name	Description	Value
vmstorage.service.type	VictoriaMetrics Storage service type	ClusterIP
vmstorage.service.ports.http	VictoriaMetrics Storage service http port	80
vmstorage.service.nodePorts.http	Node port for HTTP	""
vmstorage.service.clusterIP	VictoriaMetrics Storage service Cluster IP	""
vmstorage.service.loadBalancerIP	VictoriaMetrics Storage service Load Balancer IP	""
vmstorage.service.loadBalancerSourceRanges	VictoriaMetrics Storage service Load Balancer sources	[]
vmstorage.service.externalTrafficPolicy	VictoriaMetrics Storage service external traffic policy	Cluster
vmstorage.service.annotations	Additional custom annotations for VictoriaMetrics Storage service	{}
vmstorage.service.extraPorts	Extra ports to expose in VictoriaMetrics Storage service (normally used with the sidecars value)	[]
vmstorage.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
vmstorage.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
vmstorage.service.headless.annotations	Annotations for the headless service.	{}
vmstorage.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
vmstorage.networkPolicy.allowExternal	Don't require server label for connections	true
vmstorage.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
vmstorage.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
vmstorage.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
vmstorage.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
vmstorage.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

VictoriaMetrics Storage Persistence Parameters

Name	Description	Value
vmstorage.persistence.enabled	Enable persistence using Persistent Volume Claims	true
vmstorage.persistence.mountPath	Persistent Volume mount root path	/data
vmstorage.persistence.storageClass	Persistent Volume storage class	""
vmstorage.persistence.accessModes	Persistent Volume access modes	[]
vmstorage.persistence.size	Persistent Volume size	10Gi
vmstorage.persistence.dataSource	Custom PVC data source	{}
vmstorage.persistence.annotations	Annotations for the PVC	{}
vmstorage.persistence.selector	Selector to match an existing Persistent Volume (this value is evaluated as a template)	{}
vmstorage.persistence.existingClaim	The name of an existing PVC to use for persistence	""
vmstorage.persistence.extraVolumeClaimTemplates	Add additional VolumeClaimTemplates for enabling any plugins or any other purpose	[]

VictoriaMetrics Storage Metrics Parameters

Name	Description	Value
vmstorage.metrics.enabled	Enable the export of Prometheus metrics	false
vmstorage.metrics.annotations	Additional custom annotations for the service	{}
vmstorage.metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
vmstorage.metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
vmstorage.metrics.serviceMonitor.annotations	Additional custom annotations for the ServiceMonitor	{}
vmstorage.metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
vmstorage.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in Prometheus	""
vmstorage.metrics.serviceMonitor.honorLabels	honorLabels chooses the metric's labels on collisions with target labels	false
vmstorage.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
vmstorage.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
vmstorage.metrics.serviceMonitor.metricRelabelings	Specify additional relabeling of metrics	[]
vmstorage.metrics.serviceMonitor.relabelings	Specify general relabeling	[]
vmstorage.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}

VictoriaMetrics Auth Parameters

Name	Description	Value
vmauth.enabled	Enable VictoriaMetrics Auth	true
vmauth.image.registry	VictoriaMetrics Auth image registry	REGISTRY_NAME
vmauth.image.repository	VictoriaMetrics Auth image repository	REPOSITORY_NAME/victoriametrics-vmauth
vmauth.image.digest	VictoriaMetrics Auth image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)	""
vmauth.image.pullPolicy	VictoriaMetrics Auth image pull policy	IfNotPresent
vmauth.image.pullSecrets	VictoriaMetrics Auth image pull secrets	[]
vmauth.replicaCount	Number of VictoriaMetrics Auth replicas to deploy	1
vmauth.containerPorts.http	VictoriaMetrics Auth http container port	8427
vmauth.livenessProbe.enabled	Enable livenessProbe on VictoriaMetrics Auth containers	true
vmauth.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
vmauth.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
vmauth.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
vmauth.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
vmauth.livenessProbe.successThreshold	Success threshold for livenessProbe	1
vmauth.readinessProbe.enabled	Enable readinessProbe on VictoriaMetrics Auth containers	true
vmauth.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
vmauth.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
vmauth.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
vmauth.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
vmauth.readinessProbe.successThreshold	Success threshold for readinessProbe	1
vmauth.startupProbe.enabled	Enable startupProbe on VictoriaMetrics Auth containers	false
vmauth.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
vmauth.startupProbe.periodSeconds	Period seconds for startupProbe	10
vmauth.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
vmauth.startupProbe.failureThreshold	Failure threshold for startupProbe	5
vmauth.startupProbe.successThreshold	Success threshold for startupProbe	1
vmauth.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
vmauth.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
vmauth.customStartupProbe	Custom startupProbe that overrides the default one	{}
vmauth.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if vmauth.resources is set (vmauth.resources is recommended for production).	nano
vmauth.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
vmauth.kind	Define how to deploy VictoriaMetrics Auth (allowed values: deployment or daemonset)	deployment
vmauth.annotations	Annotations for VictoriaMetrics Auth Deployment or StatefulSet	{}
vmauth.podSecurityContext.enabled	Enabled VictoriaMetrics Auth pods' Security Context	true
vmauth.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
vmauth.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
vmauth.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
vmauth.podSecurityContext.fsGroup	Set VictoriaMetrics Auth pod's Security Context fsGroup	1001
vmauth.containerSecurityContext.enabled	Enabled VictoriaMetrics Auth containers' Security Context	true
vmauth.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
vmauth.containerSecurityContext.runAsUser	Set containers' Security Context runAsUser	1001
vmauth.containerSecurityContext.runAsGroup	Set containers' Security Context runAsGroup	1001
vmauth.containerSecurityContext.runAsNonRoot	Set VictoriaMetrics Auth containers' Security Context runAsNonRoot	true
vmauth.containerSecurityContext.privileged	Set VictoriaMetrics Auth containers' Security Context privileged	false
vmauth.containerSecurityContext.readOnlyRootFilesystem	Set VictoriaMetrics Auth containers' Security Context runAsNonRoot	true
vmauth.containerSecurityContext.allowPrivilegeEscalation	Set VictoriaMetrics Auth container's privilege escalation	false
vmauth.containerSecurityContext.capabilities.drop	Set VictoriaMetrics Auth container's Security Context runAsNonRoot	["ALL"]
vmauth.containerSecurityContext.seccompProfile.type	Set VictoriaMetrics Auth container's Security Context seccomp profile	RuntimeDefault
vmauth.command	Override default container command (useful when using custom images)	[]
vmauth.args	Override default container args (useful when using custom images)	[]
vmauth.extraArgs	Add extra arguments to the default command	[]
vmauth.automountServiceAccountToken	Mount Service Account token in pod	false
vmauth.hostAliases	VictoriaMetrics Auth pods host aliases	[]
vmauth.podLabels	Extra labels for VictoriaMetrics Auth pods	{}
vmauth.podAnnotations	Annotations for VictoriaMetrics Auth pods	{}
vmauth.podAffinityPreset	Pod affinity preset. Ignored if vmauth.affinity is set. Allowed values: soft or hard	""
vmauth.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if vmauth.affinity is set. Allowed values: soft or hard	soft
vmauth.pdb.create	Enable/disable a Pod Disruption Budget creation	true
vmauth.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
vmauth.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
vmauth.configOverrides	Overwrite or add extra configuration options to the chart default	{}
vmauth.existingSecret	The name of an existing Secret with configuration	""
vmauth.autoscaling.vpa.enabled	Enable VPA for VictoriaMetrics Auth pods	false
vmauth.autoscaling.vpa.annotations	Annotations for VPA resource	{}
vmauth.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
vmauth.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
vmauth.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
vmauth.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy	Auto
vmauth.autoscaling.hpa.enabled	Enable HPA for VictoriaMetrics Auth pods	false
vmauth.autoscaling.hpa.minReplicas	Minimum number of replicas	""
vmauth.autoscaling.hpa.maxReplicas	Maximum number of replicas	""
vmauth.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
vmauth.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""
vmauth.nodeAffinityPreset.type	Node affinity preset type. Ignored if vmauth.affinity is set. Allowed values: soft or hard	""
vmauth.nodeAffinityPreset.key	Node label key to match. Ignored if vmauth.affinity is set	""
vmauth.nodeAffinityPreset.values	Node label values to match. Ignored if vmauth.affinity is set	[]
vmauth.affinity	Affinity for VictoriaMetrics Auth pods assignment	{}
vmauth.nodeSelector	Node labels for VictoriaMetrics Auth pods assignment	{}
vmauth.tolerations	Tolerations for VictoriaMetrics Auth pods assignment	[]
vmauth.updateStrategy.type	VictoriaMetrics Auth statefulset strategy type	RollingUpdate
vmauth.priorityClassName	VictoriaMetrics Auth pods' priorityClassName	""
vmauth.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
vmauth.schedulerName	Name of the k8s scheduler (other than default) for VictoriaMetrics Auth pods	""
vmauth.terminationGracePeriodSeconds	Seconds Redmine pod needs to terminate gracefully	""
vmauth.lifecycleHooks	for the VictoriaMetrics Auth container(s) to automate configuration before or after startup	{}
vmauth.extraEnvVars	Array with extra environment variables to add to VictoriaMetrics Auth nodes	[]
vmauth.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for VictoriaMetrics Auth nodes	""
vmauth.extraEnvVarsSecret	Name of existing Secret containing extra env vars for VictoriaMetrics Auth nodes	""
vmauth.extraVolumes	Optionally specify extra list of additional volumes for the VictoriaMetrics Auth pod(s)	[]
vmauth.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the VictoriaMetrics Auth container(s)	[]
vmauth.sidecars	Add additional sidecar containers to the VictoriaMetrics Auth pod(s)	[]
vmauth.initContainers	Add additional init containers to the VictoriaMetrics Auth pod(s)	[]

VictoriaMetrics Auth RBAC Parameters

Name	Description	Value
vmauth.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
vmauth.serviceAccount.name	The name of the ServiceAccount to use.	""
vmauth.serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
vmauth.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false

VictoriaMetrics Auth Traffic Exposure Parameters

Name	Description	Value
vmauth.service.type	VictoriaMetrics Auth service type	ClusterIP
vmauth.service.ports.http	VictoriaMetrics Auth service http port	8427
vmauth.service.nodePorts.http	Node port for HTTP	""
vmauth.service.clusterIP	VictoriaMetrics Auth service Cluster IP	""
vmauth.service.loadBalancerIP	VictoriaMetrics Auth service Load Balancer IP	""
vmauth.service.loadBalancerSourceRanges	VictoriaMetrics Auth service Load Balancer sources	[]
vmauth.service.externalTrafficPolicy	VictoriaMetrics Auth service external traffic policy	Cluster
vmauth.service.annotations	Additional custom annotations for VictoriaMetrics Auth service	{}
vmauth.service.extraPorts	Extra ports to expose in VictoriaMetrics Auth service (normally used with the sidecars value)	[]
vmauth.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
vmauth.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
vmauth.ingress.enabled	Enable ingress record generation for VictoriaMetrics Auth	false
vmauth.ingress.pathType	Ingress path type	ImplementationSpecific
vmauth.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
vmauth.ingress.hostname	Default host for the ingress record	vmauth.local
vmauth.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
vmauth.ingress.path	Default path for the ingress record	/
vmauth.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
vmauth.ingress.tls	Enable TLS configuration for the host defined at vmauth.ingress.hostname parameter	false
vmauth.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
vmauth.ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
vmauth.ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
vmauth.ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
vmauth.ingress.secrets	Custom TLS certificates as secrets	[]
vmauth.ingress.extraRules	Additional rules to be covered with this ingress record	[]
vmauth.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
vmauth.networkPolicy.allowExternal	Don't require server label for connections	true
vmauth.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
vmauth.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
vmauth.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
vmauth.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
vmauth.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

VictoriaMetrics Auth Metrics Parameters

Name	Description	Value
vmauth.metrics.enabled	Enable the export of Prometheus metrics	false
vmauth.metrics.annotations	Additional custom annotations for the service	{}
vmauth.metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
vmauth.metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
vmauth.metrics.serviceMonitor.annotations	Additional custom annotations for the ServiceMonitor	{}
vmauth.metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
vmauth.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in Prometheus	""
vmauth.metrics.serviceMonitor.honorLabels	honorLabels chooses the metric's labels on collisions with target labels	false
vmauth.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
vmauth.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
vmauth.metrics.serviceMonitor.metricRelabelings	Specify additional relabeling of metrics	[]
vmauth.metrics.serviceMonitor.relabelings	Specify general relabeling	[]
vmauth.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}

VictoriaMetrics Agent Parameters

Name	Description	Value
vmagent.enabled	Enable VictoriaMetrics Agent	true
vmagent.image.registry	VictoriaMetrics Agent image registry	REGISTRY_NAME
vmagent.image.repository	VictoriaMetrics Agent image repository	REPOSITORY_NAME/victoriametrics-vmagent
vmagent.image.digest	VictoriaMetrics Agent image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)	""
vmagent.image.pullPolicy	VictoriaMetrics Agent image pull policy	IfNotPresent
vmagent.image.pullSecrets	VictoriaMetrics Agent image pull secrets	[]
vmagent.replicaCount	Number of VictoriaMetrics Agent replicas to deploy	1
vmagent.containerPorts.http	VictoriaMetrics Agent http container port	8429
vmagent.containerPorts.graphite	VictoriaMetrics Agent graphite container port	2003
vmagent.containerPorts.opentsdb	VictoriaMetrics Agent opentsdb container port	4242
vmagent.containerPorts.influxdb	VictoriaMetrics Agent influxdb container port	8089
vmagent.livenessProbe.enabled	Enable livenessProbe on VictoriaMetrics Agent containers	true
vmagent.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
vmagent.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
vmagent.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
vmagent.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
vmagent.livenessProbe.successThreshold	Success threshold for livenessProbe	1
vmagent.readinessProbe.enabled	Enable readinessProbe on VictoriaMetrics Agent containers	true
vmagent.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
vmagent.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
vmagent.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
vmagent.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
vmagent.readinessProbe.successThreshold	Success threshold for readinessProbe	1
vmagent.startupProbe.enabled	Enable startupProbe on VictoriaMetrics Agent containers	false
vmagent.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
vmagent.startupProbe.periodSeconds	Period seconds for startupProbe	10
vmagent.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
vmagent.startupProbe.failureThreshold	Failure threshold for startupProbe	5
vmagent.startupProbe.successThreshold	Success threshold for startupProbe	1
vmagent.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
vmagent.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
vmagent.customStartupProbe	Custom startupProbe that overrides the default one	{}
vmagent.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if vmagent.resources is set (vmagent.resources is recommended for production).	nano
vmagent.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
vmagent.kind	Define how to deploy VictoriaMetrics Agent (allowed values: deployment or daemonset)	deployment
vmagent.annotations	Annotations for VictoriaMetrics Agent Deployment or StatefulSet	{}
vmagent.podSecurityContext.enabled	Enabled VictoriaMetrics Agent pods' Security Context	true
vmagent.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
vmagent.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
vmagent.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
vmagent.podSecurityContext.fsGroup	Set VictoriaMetrics Agent pod's Security Context fsGroup	1001
vmagent.containerSecurityContext.enabled	Enabled VictoriaMetrics Agent containers' Security Context	true
vmagent.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
vmagent.containerSecurityContext.runAsUser	Set containers' Security Context runAsUser	1001
vmagent.containerSecurityContext.runAsGroup	Set containers' Security Context runAsGroup	1001
vmagent.containerSecurityContext.runAsNonRoot	Set VictoriaMetrics Agent containers' Security Context runAsNonRoot	true
vmagent.containerSecurityContext.privileged	Set VictoriaMetrics Agent containers' Security Context privileged	false
vmagent.containerSecurityContext.readOnlyRootFilesystem	Set VictoriaMetrics Agent containers' Security Context runAsNonRoot	true
vmagent.containerSecurityContext.allowPrivilegeEscalation	Set VictoriaMetrics Agent container's privilege escalation	false
vmagent.containerSecurityContext.capabilities.drop	Set VictoriaMetrics Agent container's Security Context runAsNonRoot	["ALL"]
vmagent.containerSecurityContext.seccompProfile.type	Set VictoriaMetrics Agent container's Security Context seccomp profile	RuntimeDefault
vmagent.command	Override default container command (useful when using custom images)	[]
vmagent.args	Override default container args (useful when using custom images)	[]
vmagent.extraArgs	Add extra arguments to the default command	[]
vmagent.automountServiceAccountToken	Mount Service Account token in pod	true
vmagent.hostAliases	VictoriaMetrics Agent pods host aliases	[]
vmagent.podLabels	Extra labels for VictoriaMetrics Agent pods	{}
vmagent.podAnnotations	Annotations for VictoriaMetrics Agent pods	{}
vmagent.podAffinityPreset	Pod affinity preset. Ignored if vmagent.affinity is set. Allowed values: soft or hard	""
vmagent.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if vmagent.affinity is set. Allowed values: soft or hard	soft
vmagent.pdb.create	Enable/disable a Pod Disruption Budget creation	true
vmagent.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
vmagent.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
vmagent.scrapeConfigOverrides	Overwrite or add extra scraping configuration options to the chart default	{}
vmagent.enableListeners.influxdb	Enable influxdb listener	false
vmagent.enableListeners.opentsdb	Enable graphite listener	false
vmagent.enableListeners.graphite	Enable opentsdb listener	false
vmagent.existingScrapeConfigMap	The name of an existing ConfigMap with the scrape configuration	""
vmagent.namespaced	Only scrape in the deployed namespace	false
vmagent.allowedMetricsEndpoints	Allowed metrics endpoints to scrape (when not namespaced)	[]
vmagent.autoscaling.vpa.enabled	Enable VPA for VictoriaMetrics Agent pods	false
vmagent.autoscaling.vpa.annotations	Annotations for VPA resource	{}
vmagent.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
vmagent.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
vmagent.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
vmagent.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy	Auto
vmagent.autoscaling.hpa.enabled	Enable HPA for VictoriaMetrics Agent pods	false
vmagent.autoscaling.hpa.minReplicas	Minimum number of replicas	""
vmagent.autoscaling.hpa.maxReplicas	Maximum number of replicas	""
vmagent.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
vmagent.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""
vmagent.nodeAffinityPreset.type	Node affinity preset type. Ignored if vmagent.affinity is set. Allowed values: soft or hard	""
vmagent.nodeAffinityPreset.key	Node label key to match. Ignored if vmagent.affinity is set	""
vmagent.nodeAffinityPreset.values	Node label values to match. Ignored if vmagent.affinity is set	[]
vmagent.affinity	Affinity for VictoriaMetrics Agent pods assignment	{}
vmagent.nodeSelector	Node labels for VictoriaMetrics Agent pods assignment	{}
vmagent.tolerations	Tolerations for VictoriaMetrics Agent pods assignment	[]
vmagent.updateStrategy.type	VictoriaMetrics Agent statefulset strategy type	RollingUpdate
vmagent.priorityClassName	VictoriaMetrics Agent pods' priorityClassName	""
vmagent.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
vmagent.schedulerName	Name of the k8s scheduler (other than default) for VictoriaMetrics Agent pods	""
vmagent.terminationGracePeriodSeconds	Seconds Redmine pod needs to terminate gracefully	""
vmagent.lifecycleHooks	for the VictoriaMetrics Agent container(s) to automate configuration before or after startup	{}
vmagent.extraEnvVars	Array with extra environment variables to add to VictoriaMetrics Agent nodes	[]
vmagent.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for VictoriaMetrics Agent nodes	""
vmagent.extraEnvVarsSecret	Name of existing Secret containing extra env vars for VictoriaMetrics Agent nodes	""
vmagent.extraVolumes	Optionally specify extra list of additional volumes for the VictoriaMetrics Agent pod(s)	[]
vmagent.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the VictoriaMetrics Agent container(s)	[]
vmagent.sidecars	Add additional sidecar containers to the VictoriaMetrics Agent pod(s)	[]
vmagent.initContainers	Add additional init containers to the VictoriaMetrics Agent pod(s)	[]

VictoriaMetrics Agent RBAC Parameters

Name	Description	Value
vmagent.rbac.create	Specifies whether RBAC resources should be created	true
vmagent.rbac.rules	Custom RBAC rules to set	[]
vmagent.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
vmagent.serviceAccount.name	The name of the ServiceAccount to use.	""
vmagent.serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
vmagent.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false

VictoriaMetrics Agent Traffic Exposure Parameters

Name	Description	Value
vmagent.service.type	VictoriaMetrics Agent service type	ClusterIP
vmagent.service.ports.http	VictoriaMetrics Agent service http port	8429
vmagent.service.ports.graphite	VictoriaMetrics Agent service graphite port	2003
vmagent.service.ports.opentsdb	VictoriaMetrics Agent service opentsdb port	4242
vmagent.service.ports.influxdb	VictoriaMetrics Agent service influxdb port	8089
vmagent.service.nodePorts.http	Node port for HTTP	""
vmagent.service.nodePorts.graphite	Node port for graphite	""
vmagent.service.nodePorts.opentsdb	Node port for opentsdb	""
vmagent.service.nodePorts.influxdb	Node port for influxdb	""
vmagent.service.clusterIP	VictoriaMetrics Agent service Cluster IP	""
vmagent.service.loadBalancerIP	VictoriaMetrics Agent service Load Balancer IP	""
vmagent.service.loadBalancerSourceRanges	VictoriaMetrics Agent service Load Balancer sources	[]
vmagent.service.externalTrafficPolicy	VictoriaMetrics Agent service external traffic policy	Cluster
vmagent.service.annotations	Additional custom annotations for VictoriaMetrics Agent service	{}
vmagent.service.extraPorts	Extra ports to expose in VictoriaMetrics Agent service (normally used with the sidecars value)	[]
vmagent.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
vmagent.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
vmagent.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
vmagent.networkPolicy.allowExternal	Don't require server label for connections	true
vmagent.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
vmagent.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
vmagent.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
vmagent.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
vmagent.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

VictoriaMetrics Agent Metrics Parameters

Name	Description	Value
vmagent.metrics.enabled	Enable the export of Prometheus metrics	false
vmagent.metrics.annotations	Additional custom annotations for the service	{}
vmagent.metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
vmagent.metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
vmagent.metrics.serviceMonitor.annotations	Additional custom annotations for the ServiceMonitor	{}
vmagent.metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
vmagent.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in Prometheus	""
vmagent.metrics.serviceMonitor.honorLabels	honorLabels chooses the metric's labels on collisions with target labels	false
vmagent.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
vmagent.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
vmagent.metrics.serviceMonitor.metricRelabelings	Specify additional relabeling of metrics	[]
vmagent.metrics.serviceMonitor.relabelings	Specify general relabeling	[]
vmagent.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}

VictoriaMetrics Alert Parameters

Name	Description	Value
vmalert.enabled	Enable VictoriaMetrics Alert	false
vmalert.image.registry	VictoriaMetrics Alert image registry	REGISTRY_NAME
vmalert.image.repository	VictoriaMetrics Alert image repository	REPOSITORY_NAME/victoriametrics-vmalert
vmalert.image.digest	VictoriaMetrics Alert image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)	""
vmalert.image.pullPolicy	VictoriaMetrics Alert image pull policy	IfNotPresent
vmalert.image.pullSecrets	VictoriaMetrics Alert image pull secrets	[]
vmalert.replicaCount	Number of VictoriaMetrics Alert replicas to deploy	1
vmalert.containerPorts.http	VictoriaMetrics Alert http container port	8429
vmalert.livenessProbe.enabled	Enable livenessProbe on VictoriaMetrics Alert containers	true
vmalert.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
vmalert.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
vmalert.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
vmalert.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
vmalert.livenessProbe.successThreshold	Success threshold for livenessProbe	1
vmalert.readinessProbe.enabled	Enable readinessProbe on VictoriaMetrics Alert containers	true
vmalert.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
vmalert.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
vmalert.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
vmalert.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
vmalert.readinessProbe.successThreshold	Success threshold for readinessProbe	1
vmalert.startupProbe.enabled	Enable startupProbe on VictoriaMetrics Alert containers	false
vmalert.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
vmalert.startupProbe.periodSeconds	Period seconds for startupProbe	10
vmalert.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
vmalert.startupProbe.failureThreshold	Failure threshold for startupProbe	5
vmalert.startupProbe.successThreshold	Success threshold for startupProbe	1
vmalert.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
vmalert.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
vmalert.customStartupProbe	Custom startupProbe that overrides the default one	{}
vmalert.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if vmalert.resources is set (vmalert.resources is recommended for production).	nano
vmalert.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
vmalert.datasourceUrl	URL to an external datasource (uses VictoriaMetrics Insert if not set)	""
vmalert.notifierUrl	URL to a notifier like AlertManager (necessary when alert rules are set)	""
vmalert.deploymentAnnotations	Annotations for VictoriaMetrics Alert Deployment	{}
vmalert.podSecurityContext.enabled	Enabled VictoriaMetrics Alert pods' Security Context	true
vmalert.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
vmalert.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
vmalert.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
vmalert.podSecurityContext.fsGroup	Set VictoriaMetrics Alert pod's Security Context fsGroup	1001
vmalert.containerSecurityContext.enabled	Enabled VictoriaMetrics Alert containers' Security Context	true
vmalert.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
vmalert.containerSecurityContext.runAsUser	Set containers' Security Context runAsUser	1001
vmalert.containerSecurityContext.runAsGroup	Set containers' Security Context runAsGroup	1001
vmalert.containerSecurityContext.runAsNonRoot	Set VictoriaMetrics Alert containers' Security Context runAsNonRoot	true
vmalert.containerSecurityContext.privileged	Set VictoriaMetrics Alert containers' Security Context privileged	false
vmalert.containerSecurityContext.readOnlyRootFilesystem	Set VictoriaMetrics Alert containers' Security Context runAsNonRoot	true
vmalert.containerSecurityContext.allowPrivilegeEscalation	Set VictoriaMetrics Alert container's privilege escalation	false
vmalert.containerSecurityContext.capabilities.drop	Set VictoriaMetrics Alert container's Security Context runAsNonRoot	["ALL"]
vmalert.containerSecurityContext.seccompProfile.type	Set VictoriaMetrics Alert container's Security Context seccomp profile	RuntimeDefault
vmalert.command	Override default container command (useful when using custom images)	[]
vmalert.args	Override default container args (useful when using custom images)	[]
vmalert.extraArgs	Add extra arguments to the default command	[]
vmalert.automountServiceAccountToken	Mount Service Account token in pod	true
vmalert.hostAliases	VictoriaMetrics Alert pods host aliases	[]
vmalert.podLabels	Extra labels for VictoriaMetrics Alert pods	{}
vmalert.podAnnotations	Annotations for VictoriaMetrics Alert pods	{}
vmalert.podAffinityPreset	Pod affinity preset. Ignored if vmalert.affinity is set. Allowed values: soft or hard	""
vmalert.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if vmalert.affinity is set. Allowed values: soft or hard	soft
vmalert.pdb.create	Enable/disable a Pod Disruption Budget creation	true
vmalert.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
vmalert.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
vmalert.rulesConfigOverrides	Overwrite or add extra rules configuration options to the chart default	{}
vmalert.existingRulesConfigMap	The name of an existing ConfigMap with the rules configuration	""
vmalert.autoscaling.vpa.enabled	Enable VPA for VictoriaMetrics Alert pods	false
vmalert.autoscaling.vpa.annotations	Annotations for VPA resource	{}
vmalert.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
vmalert.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
vmalert.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
vmalert.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy	Auto
vmalert.autoscaling.hpa.enabled	Enable HPA for VictoriaMetrics Alert pods	false
vmalert.autoscaling.hpa.minReplicas	Minimum number of replicas	""
vmalert.autoscaling.hpa.maxReplicas	Maximum number of replicas	""
vmalert.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
vmalert.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""
vmalert.nodeAffinityPreset.type	Node affinity preset type. Ignored if vmalert.affinity is set. Allowed values: soft or hard	""
vmalert.nodeAffinityPreset.key	Node label key to match. Ignored if vmalert.affinity is set	""
vmalert.nodeAffinityPreset.values	Node label values to match. Ignored if vmalert.affinity is set	[]
vmalert.affinity	Affinity for VictoriaMetrics Alert pods assignment	{}
vmalert.nodeSelector	Node labels for VictoriaMetrics Alert pods assignment	{}
vmalert.tolerations	Tolerations for VictoriaMetrics Alert pods assignment	[]
vmalert.updateStrategy.type	VictoriaMetrics Alert statefulset strategy type	RollingUpdate
vmalert.priorityClassName	VictoriaMetrics Alert pods' priorityClassName	""
vmalert.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
vmalert.schedulerName	Name of the k8s scheduler (other than default) for VictoriaMetrics Alert pods	""
vmalert.terminationGracePeriodSeconds	Seconds Redmine pod needs to terminate gracefully	""
vmalert.lifecycleHooks	for the VictoriaMetrics Alert container(s) to automate configuration before or after startup	{}
vmalert.extraEnvVars	Array with extra environment variables to add to VictoriaMetrics Alert nodes	[]
vmalert.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for VictoriaMetrics Alert nodes	""
vmalert.extraEnvVarsSecret	Name of existing Secret containing extra env vars for VictoriaMetrics Alert nodes	""
vmalert.extraVolumes	Optionally specify extra list of additional volumes for the VictoriaMetrics Alert pod(s)	[]
vmalert.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the VictoriaMetrics Alert container(s)	[]
vmalert.sidecars	Add additional sidecar containers to the VictoriaMetrics Alert pod(s)	[]
vmalert.initContainers	Add additional init containers to the VictoriaMetrics Alert pod(s)	[]
vmalert.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
vmalert.serviceAccount.name	The name of the ServiceAccount to use.	""
vmalert.serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
vmalert.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false

VictoriaMetrics Alert Traffic Exposure Parameters

Name	Description	Value
vmalert.service.type	VictoriaMetrics Alert service type	ClusterIP
vmalert.service.ports.http	VictoriaMetrics Alert service http port	8429
vmalert.service.nodePorts.http	Node port for HTTP	""
vmalert.service.clusterIP	VictoriaMetrics Alert service Cluster IP	""
vmalert.service.loadBalancerIP	VictoriaMetrics Alert service Load Balancer IP	""
vmalert.service.loadBalancerSourceRanges	VictoriaMetrics Alert service Load Balancer sources	[]
vmalert.service.externalTrafficPolicy	VictoriaMetrics Alert service external traffic policy	Cluster
vmalert.service.annotations	Additional custom annotations for VictoriaMetrics Alert service	{}
vmalert.service.extraPorts	Extra ports to expose in VictoriaMetrics Alert service (normally used with the sidecars value)	[]
vmalert.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
vmalert.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
vmalert.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
vmalert.networkPolicy.allowExternal	Don't require server label for connections	true
vmalert.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
vmalert.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
vmalert.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
vmalert.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
vmalert.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

VictoriaMetrics Alert Metrics Parameters

Name	Description	Value
vmalert.metrics.enabled	Enable the export of Prometheus metrics	false
vmalert.metrics.annotations	Additional custom annotations for the service	{}
vmalert.metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
vmalert.metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
vmalert.metrics.serviceMonitor.annotations	Additional custom annotations for the ServiceMonitor	{}
vmalert.metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
vmalert.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in Prometheus	""
vmalert.metrics.serviceMonitor.honorLabels	honorLabels chooses the metric's labels on collisions with target labels	false
vmalert.metrics.serviceMonitor.interval	Interval at which metrics should be rulesd.	""
vmalert.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
vmalert.metrics.serviceMonitor.metricRelabelings	Specify additional relabeling of metrics	[]
vmalert.metrics.serviceMonitor.relabelings	Specify general relabeling	[]
vmalert.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}

Default Init Containers Parameters

Name	Description	Value
defaultInitContainers.volumePermissions.enabled	Enable init container that changes the owner/group of the PV mount point to runAsUser:fsGroup	false
defaultInitContainers.volumePermissions.image.registry	OS Shell + Utility image registry	REGISTRY_NAME
defaultInitContainers.volumePermissions.image.repository	OS Shell + Utility image repository	REPOSITORY_NAME/os-shell
defaultInitContainers.volumePermissions.image.digest	OS Shell + Utility image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag	""
defaultInitContainers.volumePermissions.image.pullPolicy	OS Shell + Utility image pull policy	IfNotPresent
defaultInitContainers.volumePermissions.image.pullSecrets	OS Shell + Utility image pull secrets	[]
defaultInitContainers.volumePermissions.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).	nano
defaultInitContainers.volumePermissions.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
defaultInitContainers.volumePermissions.containerSecurityContext.enabled	Enable securityContext in the init container	true
defaultInitContainers.volumePermissions.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
defaultInitContainers.volumePermissions.containerSecurityContext.runAsUser	User ID for the init container	0

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release --set vmagent.enableListeners.influxdb=true oci://REGISTRY_NAME/REPOSITORY_NAME/victoriametrics

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command install VictoriaMetrics chart with the InfluxDB listener enabled in the vmagent component.

Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/victoriametrics

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami's Helm charts in this troubleshooting guide.

License

Copyright © 2025 Broadcom. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.