charts/bitnami/cadvisor/values.yaml

# Copyright Broadcom, Inc. All Rights Reserved.
# SPDX-License-Identifier: APACHE-2.0

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass
##

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
## @param global.defaultStorageClass Global default StorageClass for Persistent Volume(s)
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  defaultStorageClass: ""
  ## Security parameters
  ##
  security:
    ## @param global.security.allowInsecureImages Allows skipping image verification
    allowInsecureImages: false
  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto
## @section Common parameters
##

## @param kubeVersion Force target Kubernetes version (using Helm capabilities if not set)
##
kubeVersion: ""
## @param nameOverride String to partially override cadvisor.fullname template (will maintain the release name)
##
nameOverride: ""
## @param fullnameOverride String to fully override cadvisor.fullname template
##
fullnameOverride: ""
## @param namespaceOverride String to fully override common.names.namespace
##
namespaceOverride: ""
## @param commonAnnotations Common annotations to add to all cAdvisor resources (sub-charts are not considered). Evaluated as a template
##
commonAnnotations: {}
## @param commonLabels Common labels to add to all cAdvisor resources (sub-charts are not considered). Evaluated as a template
##
commonLabels: {}
## @param extraDeploy Array of extra objects to deploy with the release (evaluated as a template).
##
extraDeploy: []
## Enable diagnostic mode in the deployment
##
diagnosticMode:
  ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden)
  ##
  enabled: false
  ## @param diagnosticMode.command Command to override all containers in the deployment
  ##
  command:
    - sleep
  ## @param diagnosticMode.args Args to override all containers in the deployment
  ##
  args:
    - infinity
## @section cAdvisor parameters
##

## Bitnami cAdvisor image version
## ref: https://hub.docker.com/r/bitnami/cadvisor/tags/
## @param image.registry [default: REGISTRY_NAME] cAdvisor image registry
## @param image.repository [default: REPOSITORY_NAME/cadvisor] cAdvisor Image name
## @skip image.tag cAdvisor Image tag
## @param image.digest cAdvisor image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
## @param image.pullPolicy cAdvisor image pull policy
## @param image.pullSecrets Specify docker-registry secret names as an array
##
image:
  registry: docker.io
  repository: bitnami/cadvisor
  tag: 0.53.0-debian-12-r9
  digest: ""
  ## Specify a imagePullPolicy
  ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## e.g:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []
## @param command Override default container command (useful when using custom images)
##
command: []
## @param args Override default container args (useful when using custom images)
##
args: []
## @param extraArgs Add extra arguments to the default command
##
extraArgs: []
## @param updateStrategy.type Set up update strategy.
##
updateStrategy:
  type: RollingUpdate
## @param priorityClassName cAdvisor pods' priorityClassName
##
priorityClassName: ""
## @param schedulerName Name of the k8s scheduler (other than default)
## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
##
schedulerName: ""
## @param topologySpreadConstraints Topology Spread Constraints for pod assignment
## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
## The value is evaluated as a template
##
topologySpreadConstraints: []
## @param automountServiceAccountToken Mount Service Account token in pod
##
automountServiceAccountToken: false
## @param hostAliases [array] Add daemonset host aliases
## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
##
hostAliases: []
## @param extraEnvVars Extra environment variables
## For example:
##
extraEnvVars: []
#  - name: BEARER_AUTH
#    value: true
## @param extraEnvVarsCM ConfigMap containing extra env vars
##
extraEnvVarsCM: ""
## @param extraEnvVarsSecret Secret containing extra env vars (in case of sensitive data)
##
extraEnvVarsSecret: ""
## Default mounts (set to true to enable it)
##
defaultMounts:
  ## @param defaultMounts.rootfs Mount host /
  ##
  rootfs: true
  ## @param defaultMounts.varRun Mount host /var/run
  ##
  varRun: true
  ## @param defaultMounts.sys Mount host /sys
  ##
  sys: true
  ## @param defaultMounts.varLibDocker Mount host /var/lib/docker
  ##
  varLibDocker: true
  ## @param defaultMounts.devDisk Mount host /dev/disk
  ##
  devDisk: true
## @param extraVolumes Array of extra volumes to be added to the daemonset (evaluated as template). Requires setting `extraVolumeMounts`
##
extraVolumes: []
## @param extraVolumeMounts Array of extra volume mounts to be added to the container (evaluated as template). Normally used with `extraVolumes`.
##
extraVolumeMounts: []
## @param initContainers Add additional init containers to the pod (evaluated as a template)
##
initContainers: []
## @param sidecars Attach additional containers to the pod (evaluated as a template)
##
sidecars: []
## @param tolerations Tolerations for pod assignment
## Ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
## @param podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAffinityPreset: ""
## @param podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAntiAffinityPreset: soft
## Node affinity preset
## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
## @param nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## @param nodeAffinityPreset.key Node label key to match Ignored if `affinity` is set.
## @param nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set.
##
nodeAffinityPreset:
  type: ""
  ## E.g.
  ## key: "kubernetes.io/e2e-az-name"
  ##
  key: ""
  ## E.g.
  ## values:
  ##   - e2e-az1
  ##   - e2e-az2
  ##
  values: []
## @param affinity Affinity for pod assignment
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
## Note: podAffinityPreset, podAntiAffinityPreset, and nodeAffinityPreset will be ignored when it's set
##
affinity: {}
## @param nodeSelector Node labels for pod assignment. Evaluated as a template.
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
##
nodeSelector: {}
## Container ports
## @param containerPorts.http cAdvisor HTTP container port
##
containerPorts:
  http: 8080
## @param extraContainerPorts Optionally specify extra list of additional ports for cAdvisor container(s)
## e.g:
## extraContainerPorts:
##   - name: myservice
##     containerPort: 9090
##
extraContainerPorts: []
## cAdvisor container's resource requests and limits
## ref: http://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
## @param resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).
## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
##
resourcesPreset: "small"
## @param resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
## Example:
## resources:
##   requests:
##     cpu: 2
##     memory: 512Mi
##   limits:
##     cpu: 3
##     memory: 1024Mi
##
resources: {}
## Configure Pods Security Context
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
## @param podSecurityContext.enabled Enable cAdvisor pods' Security Context
## @param podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
## @param podSecurityContext.sysctls Set kernel settings using the sysctl interface
## @param podSecurityContext.supplementalGroups Set filesystem extra groups
## @param podSecurityContext.fsGroup cAdvisor pods' group ID
##
podSecurityContext:
  enabled: true
  fsGroupChangePolicy: Always
  sysctls: []
  supplementalGroups: []
  fsGroup: 0
## Configure Container Security Context (only main container)
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
## @param containerSecurityContext.enabled Enable cAdvisor containers' Security Context
## @param containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
## @param containerSecurityContext.runAsUser cAdvisor containers' Security Context
## @param containerSecurityContext.runAsGroup cAdvisor containers' Security Context
## @param containerSecurityContext.runAsNonRoot Set cAdvisor container's Security Context runAsNonRoot
## @param containerSecurityContext.privileged Set cAdvisor container's Security Context privileged
## @param containerSecurityContext.allowPrivilegeEscalation Set container's Security Context allowPrivilegeEscalation
## @param containerSecurityContext.readOnlyRootFilesystem Set container's Security Context readOnlyRootFilesystem
## @param containerSecurityContext.capabilities.drop List of capabilities to be dropped
## @param containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
##
containerSecurityContext:
  enabled: true
  seLinuxOptions: {}
  runAsUser: 0
  runAsGroup: 0
  runAsNonRoot: false
  privileged: false
  allowPrivilegeEscalation: true
  readOnlyRootFilesystem: true
  capabilities:
    drop: ["ALL"]
  seccompProfile:
    type: "RuntimeDefault"
## Configure extra options for startup probe
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
## @param startupProbe.enabled Enable startupProbe
## @param startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
## @param startupProbe.periodSeconds Period seconds for startupProbe
## @param startupProbe.timeoutSeconds Timeout seconds for startupProbe
## @param startupProbe.failureThreshold Failure threshold for startupProbe
## @param startupProbe.successThreshold Success threshold for startupProbe
##
startupProbe:
  enabled: false
  initialDelaySeconds: 10
  periodSeconds: 10
  timeoutSeconds: 5
  failureThreshold: 5
  successThreshold: 1
## Configure extra options for liveness probe
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
## @param livenessProbe.enabled Enable livenessProbe
## @param livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
## @param livenessProbe.periodSeconds Period seconds for livenessProbe
## @param livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
## @param livenessProbe.failureThreshold Failure threshold for livenessProbe
## @param livenessProbe.successThreshold Success threshold for livenessProbe
##
livenessProbe:
  enabled: true
  initialDelaySeconds: 10
  periodSeconds: 10
  timeoutSeconds: 5
  failureThreshold: 5
  successThreshold: 1
## Configure extra options for readiness probe
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
## @param readinessProbe.enabled Enable readinessProbe
## @param readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
## @param readinessProbe.periodSeconds Period seconds for readinessProbe
## @param readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
## @param readinessProbe.failureThreshold Failure threshold for readinessProbe
## @param readinessProbe.successThreshold Success threshold for readinessProbe
##
readinessProbe:
  enabled: true
  initialDelaySeconds: 10
  periodSeconds: 5
  timeoutSeconds: 1
  failureThreshold: 5
  successThreshold: 1
## @param customStartupProbe Override default startup probe
##
customStartupProbe: {}
## @param customLivenessProbe Override default liveness probe
##
customLivenessProbe: {}
## @param customReadinessProbe Override default readiness probe
##
customReadinessProbe: {}
## @param lifecycleHooks LifecycleHook to set additional configuration at startup Evaluated as a template
##
lifecycleHooks: {}
## @param podAnnotations Pod annotations
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
##
podAnnotations: {}
## @param podLabels Add additional labels to the pod (evaluated as a template)
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
##
podLabels: {}
## @section Traffic Exposure Parameters
##
## Kubernetes svc configutarion
##
service:
  ## @param service.enabled Whether to create Service resource or not
  ##
  enabled: true
  ## @param service.type Kubernetes Service type
  ##
  type: ClusterIP
  ## @param service.ports.http cAdvisor client port
  ##
  ports:
    http: 8080
  ## @param service.nodePorts.http Port to bind to for NodePort service type (client port)
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
  ##
  nodePorts:
    http: ""
  ## @param service.clusterIP IP address to assign to service
  ##
  clusterIP: ""
  ## @param service.externalIPs Service external IP addresses
  ##
  externalIPs: []
  ## @param service.externalName Service external name
  ##
  externalName: ""
  ## @param service.loadBalancerIP IP address to assign to load balancer (if supported)
  ##
  loadBalancerIP: ""
  ## @param service.loadBalancerSourceRanges List of IP CIDRs allowed access to load balancer (if supported)
  ##
  loadBalancerSourceRanges: []
  ## @param service.externalTrafficPolicy Enable client source IP preservation
  ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
  ##
  externalTrafficPolicy: Cluster
  ## @param service.extraPorts Extra ports to expose in the service (normally used with the `sidecar` value)
  ##
  extraPorts: []
  ## @param service.annotations Annotations to add to service
  ## set the LoadBalancer service type to internal only.
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
  ##
  annotations: {}
  ## @param service.labels Provide any additional labels which may be required.
  ## This can be used to have external-dns show up in `kubectl cluster-info`
  ##  kubernetes.io/cluster-service: "true"
  ##  kubernetes.io/name: "external-dns"
  ##
  labels: {}
  ## @param service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
  ## If "ClientIP", consecutive client requests will be directed to the same Pod
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
  ##
  sessionAffinity: None
  ## @param service.sessionAffinityConfig Additional settings for the sessionAffinity
  ## sessionAffinityConfig:
  ##   clientIP:
  ##     timeoutSeconds: 300
  ##
  sessionAffinityConfig: {}
## Network Policies
## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
##
networkPolicy:
  ## @param networkPolicy.enabled Specifies whether a NetworkPolicy should be created
  ##
  enabled: true
  ## @param networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
  ##
  allowExternalEgress: true
  ## @param networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraIngress:
  ##   - ports:
  ##       - port: 1234
  ##     from:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  extraIngress: []
  ## @param networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraEgress:
  ##   - ports:
  ##       - port: 1234
  ##     to:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  ##
  extraEgress: []
  ## @param networkPolicy.addExternalClientAccess Allow access from pods with client label set to "true". Ignored if `networkPolicy.allowExternal` is true.
  ##
  addExternalClientAccess: true
  ## @param networkPolicy.ingressPodMatchLabels [object] Labels to match to allow traffic from other pods. Ignored if `networkPolicy.allowExternal` is true.
  ## e.g:
  ## ingressPodMatchLabels:
  ##   my-client: "true"
  #
  ingressPodMatchLabels: {}
  ## @param networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces. Ignored if `networkPolicy.allowExternal` is true.
  ## @param networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces. Ignored if `networkPolicy.allowExternal` is true.
  ##
  ingressNSMatchLabels: {}
  ingressNSPodMatchLabels: {}
## Configure the ingress resource that allows you to access the
## cadvisor installation. Set up the URL
## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/
##
ingress:
  ## @param ingress.enabled Set to true to enable ingress record generation
  ##
  enabled: false
  ## @param ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
  ##
  selfSigned: false
  ## @param ingress.pathType Ingress path type
  ##
  pathType: ImplementationSpecific
  ## @param ingress.apiVersion Force Ingress API version (automatically detected if not set)
  ##
  apiVersion: ""
  ## @param ingress.hostname Default host for the ingress resource
  ##
  hostname: cadvisor.local
  ## @param ingress.path The Path to Nginx. You may need to set this to '/*' in order to use this with ALB ingress controllers.
  ##
  path: /
  ## @param ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
  ## For a full list of possible ingress annotations, please see
  ## ref: https://github.com/kubernetes/ingress-nginx/blob/main/docs/user-guide/nginx-configuration/annotations.md
  ## Use this parameter to set the required annotations for cert-manager, see
  ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
  ##
  ## e.g:
  ## annotations:
  ##   kubernetes.io/ingress.class: nginx
  ##   cert-manager.io/cluster-issuer: cluster-issuer-name
  ##
  annotations: {}
  ## @param ingress.ingressClassName Set the ingerssClassName on the ingress record for k8s 1.18+
  ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
  ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
  ##
  ingressClassName: ""
  ## @param ingress.tls Create TLS Secret
  ## TLS certificates will be retrieved from a TLS secret with name: {{- printf "%s-tls" .Values.ingress.hostname }}
  ## You can use the ingress.secrets parameter to create this TLS secret or relay on cert-manager to create it
  ##
  tls: false
  ## @param ingress.tlsWwwPrefix Adds www subdomain to default cert
  ## Creates tls host with ingress.hostname: {{ print "www.%s" .Values.ingress.hostname }}
  ## Is enabled if "nginx.ingress.kubernetes.io/from-to-www-redirect" is "true"
  tlsWwwPrefix: false
  ## @param ingress.extraHosts The list of additional hostnames to be covered with this ingress record.
  ## Most likely the hostname above will be enough, but in the event more hosts are needed, this is an array
  ## extraHosts:
  ## - name: cadvisor.local
  ##   path: /
  ##
  extraHosts: []
  ## @param ingress.extraPaths Any additional arbitrary paths that may need to be added to the ingress under the main host.
  ## For example: The ALB ingress controller requires a special rule for handling SSL redirection.
  ## extraPaths:
  ## - path: /*
  ##   backend:
  ##     serviceName: ssl-redirect
  ##     servicePort: use-annotation
  ##
  extraPaths: []
  ## @param ingress.extraTls The tls configuration for additional hostnames to be covered with this ingress record.
  ## see: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
  ## extraTls:
  ## - hosts:
  ##     - cadvisor.local
  ##   secretName: cadvisor.local-tls
  ##
  extraTls: []
  ## @param ingress.secrets If you're providing your own certificates, please use this to add the certificates as secrets
  ## key and certificate should start with -----BEGIN CERTIFICATE----- or
  ## -----BEGIN RSA PRIVATE KEY-----
  ##
  ## name should line up with a tlsSecret set further up
  ## If you're using cert-manager, this is unneeded, as it will create the secret for you if it is not set
  ##
  ## It is also possible to create and manage the certificates outside of this helm chart
  ## Please see README.md for more information
  ## e.g:
  ## - name: cadvisor.local-tls
  ##   key:
  ##   certificate:
  ##
  secrets: []
  ## @param ingress.extraRules The list of additional rules to be added to this ingress record. Evaluated as a template
  ## Useful when looking for additional customization, such as using different backend
  ##
  extraRules: []
## @section Other Parameters
##

## Service account for cAdvisor to use.
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
##
serviceAccount:
  ## @param serviceAccount.create Enable creation of ServiceAccount for cAdvisor pod
  ##
  create: true
  ## @param serviceAccount.name The name of the ServiceAccount to use.
  ## If not set and create is true, a name is generated using the common.names.fullname template
  ##
  name: ""
  ## @param serviceAccount.automountServiceAccountToken Allows auto mount of ServiceAccountToken on the serviceAccount created
  ## Can be set to false if pods using this serviceAccount do not need to use K8s API
  ##
  automountServiceAccountToken: false
  ## @param serviceAccount.annotations Additional custom annotations for the ServiceAccount
  ##
  annotations: {}

## @section Metrics parameters
##
metrics:
  ## @param metrics.enabled Enable metrics
  ##
  enabled: false
  ## @param metrics.annotations [object] Annotations for the server service in order to scrape metrics
  annotations: {}
  ## Prometheus Operator ServiceMonitor configuration
  ##
  serviceMonitor:
    ## @param metrics.serviceMonitor.enabled Create ServiceMonitor Resource for scraping metrics using Prometheus Operator
    ##
    enabled: false
    ## @param metrics.serviceMonitor.annotations Annotations for the ServiceMonitor Resource
    ##
    annotations: ""
    ## @param metrics.serviceMonitor.namespace Namespace for the ServiceMonitor Resource (defaults to the Release Namespace)
    ##
    namespace: ""
    ## @param metrics.serviceMonitor.interval Interval at which metrics should be scraped.
    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
    ##
    interval: ""
    ## @param metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
    ##
    scrapeTimeout: ""
    ## @param metrics.serviceMonitor.labels Additional labels that can be used so ServiceMonitor will be discovered by Prometheus
    ##
    labels: {}
    ## @param metrics.serviceMonitor.selector Prometheus instance selector labels
    ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
    ##
    selector: {}
    ## @param metrics.serviceMonitor.relabelings RelabelConfigs to apply to samples before scraping
    ##
    relabelings: []
    ## @param metrics.serviceMonitor.metricRelabelings MetricRelabelConfigs to apply to samples before ingestion
    ##
    metricRelabelings: []
    ## @param metrics.serviceMonitor.honorLabels Specify honorLabels parameter to add the scrape endpoint
    ##
    honorLabels: false
    ## @param metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in prometheus.
    ##
    jobLabel: ""