tests: full-test was moved into traffic test

The new traffic test only requires namespaces and no docker.

Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>

tests/Makefile.am

@@ -26,7 +26,8 @@ EXTRA_DIST = certs/ca-key.pem certs/ca.pem ns.sh common.sh certs/server-cert.pem
 	data/test-otp.config data/test-cert-opt-pass.config data/test-gssapi-opt-pass.config \
 	certs/server-key-secp521r1.pem certs/server-cert-secp521r1.pem data/test-vhost-pass-cert.config \
 	data/vhost.hosts data/multiple-routes.config data/haproxy-auth.cfg data/test-haproxy-auth.config \
-	data/haproxy-connect.cfg data/test-haproxy-connect.config scripts/vpnc-script
+	data/haproxy-connect.cfg data/test-haproxy-connect.config scripts/vpnc-script \
+	data/test-traffic.config
 
 SUBDIRS = docker-ocserv docker-kerberos
 
@@ -39,7 +40,7 @@ endif
 if ENABLE_ROOT_TESTS
 if ENABLE_DOCKER_TESTS
 #docker tests
-dist_check_SCRIPTS += radius-test full-test unix-test kerberos-test radius-test-config \
+dist_check_SCRIPTS += radius-test unix-test kerberos-test radius-test-config \
 	proxyproto-test proxyproto-v1-test proxyproto-unix-test \
 	reload-info-test radius-group-test
 endif
@@ -49,8 +50,15 @@ dist_check_SCRIPTS += test-iroute test-multi-cookie test-pass-script \
 	test-cookie-timeout test-cookie-timeout-2 test-explicit-ip \
 	test-cookie-invalidation test-user-config test-append-routes test-ban \
 	multiple-routes haproxy-connect
+
+#other tests requiring nuttcp for traffic
+if ENABLE_NUTTCP_TESTS
+dist_check_SCRIPTS += traffic
 endif
 
+endif
+
+
 if HAVE_CWRAP
 if HAVE_CWRAP_ALL
 dist_check_SCRIPTS += test-vhost

tests/common.sh

@@ -50,14 +50,16 @@ update_config() {
 	username=$(whoami)
 	group=$(groups|cut -f 1 -d ' ')
 	cp "${srcdir}/data/${file}" "$file.$$.tmp"
-	sed -i 's|@USERNAME@|'${username}'|g' "$file.$$.tmp"
-	sed -i 's|@GROUP@|'${group}'|g' "$file.$$.tmp"
-	sed -i 's|@SRCDIR@|'${srcdir}'|g' "$file.$$.tmp"
-	sed -i 's|@OTP_FILE@|'${OTP_FILE}'|g' "$file.$$.tmp"
-	sed -i 's|@CRLNAME@|'${CRLNAME}'|g' "$file.$$.tmp"
-	sed -i 's|@PORT@|'${PORT}'|g' "$file.$$.tmp"
-	sed -i 's|@ADDRESS@|'${ADDRESS}'|g' "$file.$$.tmp"
-	sed -i 's|@VPNNET@|'${VPNNET}'|g' "$file.$$.tmp"
+	sed -i -e 's|@USERNAME@|'${username}'|g' "$file.$$.tmp" \
+	       -e 's|@GROUP@|'${group}'|g' "$file.$$.tmp" \
+	       -e 's|@SRCDIR@|'${srcdir}'|g' "$file.$$.tmp" \
+	       -e 's|@OTP_FILE@|'${OTP_FILE}'|g' "$file.$$.tmp" \
+	       -e 's|@CRLNAME@|'${CRLNAME}'|g' "$file.$$.tmp" \
+	       -e 's|@PORT@|'${PORT}'|g' "$file.$$.tmp" \
+	       -e 's|@ADDRESS@|'${ADDRESS}'|g' "$file.$$.tmp" \
+	       -e 's|@VPNNET@|'${VPNNET}'|g' "$file.$$.tmp" \
+	       -e 's|@VPNNET6@|'${VPNNET6}'|g' "$file.$$.tmp" \
+	       -e 's|@OCCTL_SOCKET@|'${OCCTL_SOCKET}'|g' "$file.$$.tmp"
 	CONFIG="$file.$$.tmp"
 }
 

tests/data/test-haproxy-connect.config

@@ -5,6 +5,8 @@
 auth = "plain[@SRCDIR@/data/test1.passwd]"
 #auth = "pam"
 
+isolate-workers = false
+
 max-ban-score = 0
 
 # A banner to be displayed on clients

tests/data/test-traffic.config

@@ -0,0 +1,193 @@
+# User authentication method. Could be set multiple times and in that case
+# all should succeed.
+# Options: certificate, pam. 
+#auth = "certificate"
+auth = "plain[@SRCDIR@/data/test1.passwd]"
+#auth = "pam"
+
+isolate-workers = false
+
+max-ban-score = 0
+
+# A banner to be displayed on clients
+#banner = "Welcome"
+
+# Use listen-host to limit to specific IPs or to the IPs of a provided hostname.
+#listen-host = @ADDRESS@
+
+use-dbus = no
+
+# Limit the number of clients. Unset or set to zero for unlimited.
+#max-clients = 1024
+max-clients = 16
+
+listen-proxy-proto = false
+
+# Limit the number of client connections to one every X milliseconds 
+# (X is the provided value). Set to zero for no limit.
+#rate-limit-ms = 100
+
+# Limit the number of identical clients (i.e., users connecting multiple times)
+# Unset or set to zero for unlimited.
+max-same-clients = 2
+
+# TCP and UDP port number
+tcp-port = @PORT@
+udp-port = @PORT@
+
+# Keepalive in seconds
+keepalive = 32400
+
+# Dead peer detection in seconds
+dpd = 440
+
+# MTU discovery (DPD must be enabled)
+try-mtu-discovery = false
+
+# The key and the certificates of the server
+# The key may be a file, or any URL supported by GnuTLS (e.g., 
+# tpmkey:uuid=xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx;storage=user
+# or pkcs11:object=my-vpn-key;object-type=private)
+#
+# There may be multiple certificate and key pairs and each key
+# should correspond to the preceding certificate.
+server-cert = @SRCDIR@/certs/server-cert.pem
+server-key = @SRCDIR@/certs/server-key.pem
+
+# Diffie-Hellman parameters. Only needed if you require support
+# for the DHE ciphersuites (by default this server supports ECDHE).
+# Can be generated using:
+# certtool --generate-dh-params --outfile /path/to/dh.pem
+#dh-params = /path/to/dh.pem
+
+# If you have a certificate from a CA that provides an OCSP
+# service you may provide a fresh OCSP status response within
+# the TLS handshake. That will prevent the client from connecting
+# independently on the OCSP server.
+# You can update this response periodically using:
+# ocsptool --ask --load-cert=your_cert --load-issuer=your_ca --outfile response
+# Make sure that you replace the following file in an atomic way.
+#ocsp-response = /path/to/ocsp.der
+
+# In case PKCS #11 or TPM keys are used the PINs should be available
+# in files. The srk-pin-file is applicable to TPM keys only (It's the storage
+# root key).
+#pin-file = /path/to/pin.txt
+#srk-pin-file = /path/to/srkpin.txt
+
+# The Certificate Authority that will be used
+# to verify clients if certificate authentication
+# is set.
+#ca-cert = /path/to/ca.pem
+
+# The object identifier that will be used to read the user ID in the client certificate.
+# The object identifier should be part of the certificate's DN
+# Useful OIDs are: 
+#  CN = 2.5.4.3, UID = 0.9.2342.19200300.100.1.1
+#cert-user-oid = 0.9.2342.19200300.100.1.1
+
+# The object identifier that will be used to read the user group in the client 
+# certificate. The object identifier should be part of the certificate's DN
+# Useful OIDs are: 
+#  OU (organizational unit) = 2.5.4.11 
+#cert-group-oid = 2.5.4.11
+
+# A revocation list of ca-cert is set
+#crl = /path/to/crl.pem
+
+# GnuTLS priority string
+tls-priorities = "PERFORMANCE:%SERVER_PRECEDENCE:%COMPAT"
+
+# To enforce perfect forward secrecy (PFS) on the main channel.
+#tls-priorities = "NORMAL:%SERVER_PRECEDENCE:%COMPAT:-RSA"
+
+# The time (in seconds) that a client is allowed to stay connected prior
+# to authentication
+auth-timeout = 40
+
+# The time (in seconds) that a client is not allowed to reconnect after 
+# a failed authentication attempt.
+#min-reauth-time = 2
+
+# Cookie validity time (in seconds)
+# Once a client is authenticated he's provided a cookie with
+# which he can reconnect. This option sets the maximum lifetime
+# of that cookie.
+cookie-validity = 172800
+
+# Script to call when a client connects and obtains an IP
+# Parameters are passed on the environment.
+# REASON, USERNAME, GROUPNAME, HOSTNAME (the hostname selected by client), 
+# DEVICE, IP_REAL (the real IP of the client), IP_LOCAL (the local IP
+# in the P-t-P connection), IP_REMOTE (the VPN IP of the client). REASON
+# may be "connect" or "disconnect".
+#connect-script = /usr/bin/myscript
+#disconnect-script = /usr/bin/myscript
+
+# UTMP
+#use-utmp = true
+
+# PID file
+#pid-file = ./ocserv.pid
+
+# The default server directory. Does not require any devices present.
+#chroot-dir = /path/to/chroot
+
+# socket file used for IPC, will be appended with .PID
+# It must be accessible within the chroot environment (if any)
+socket-file = ./ocserv-socket
+
+occtl-socket-file = @OCCTL_SOCKET@
+use-occtl = true
+
+# The user the worker processes will be run as. It should be
+# unique (no other services run as this user).
+run-as-user = @USERNAME@
+run-as-group = @GROUP@
+
+# Network settings
+
+device = vpns
+
+# The default domain to be advertised
+default-domain = example.com
+
+ipv4-network = @VPNNET@
+# Use the keywork local to advertize the local P-t-P address as DNS server
+ipv4-dns = 192.168.1.1
+
+# The NBNS server (if any)
+#ipv4-nbns = 192.168.2.3
+
+ipv6-network = @VPNNET6@
+#address = 
+#ipv6-mask = 
+#ipv6-dns = 
+
+# Prior to leasing any IP from the pool ping it to verify that
+# it is not in use by another (unrelated to this server) host.
+ping-leases = false
+
+# Leave empty to assign the default MTU of the device
+# mtu = 
+
+#route = 192.168.1.0/255.255.255.0
+#route = 192.168.5.0/255.255.255.0
+
+#
+# The following options are for (experimental) AnyConnect client 
+# compatibility. They are only available if the server is built 
+# with --enable-anyconnect
+#
+
+# Client profile xml. A sample file exists in doc/profile.xml.
+# This file must be accessible from inside the worker's chroot. 
+# The profile is ignored by the openconnect client.
+#user-profile = profile.xml
+
+# Unless set to false it is required for clients to present their
+# certificate even if they are authenticating via a previously granted
+# cookie. Legacy CISCO clients do not do that, and thus this option
+# should be set for them.
+#always-require-cert = false
+

tests/full-test

@@ -1,159 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2014 Red Hat
-#
-# This file is part of ocserv.
-#
-# ocserv is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation; either version 2 of the License, or (at
-# your option) any later version.
-#
-# ocserv is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with ocserv; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-srcdir=${srcdir:-.}
-
-#this test can only be run as root
-id|grep root >/dev/null 2>&1
-if [ $? != 0 ];then
-	exit 77
-fi
-
-PORT_OCSERV=443
-CONFIG="tcp"
-IMAGE=ocserv-test1
-IMAGE_NAME=test_ocserv
-TMP=$IMAGE_NAME.tmp
-PIDFILE="$IMAGE_NAME.$$.pid.tmp"
-. ./docker-common.sh
-
-$DOCKER run -e OCCTL_PAGER=cat -P --privileged=true -p 22 --tty=false -d --name $IMAGE_NAME $IMAGE
-if test $? != 0;then
-	echo "Cannot run docker image"
-	exit 1
-fi
-
-echo "ocserv image was run"
-#wait for ocserv to server
-sleep 5
-
-get_ip
-if test -z "$IP";then
-	echo "Detected IP is null!"
-	stop
-fi
-echo "Detected IP: $IP"
-
-if test ! -z "$QUIT_ON_INIT";then
-	exit 0
-fi
-
-$ECHO_E "testuser" >pass-full$TMP
-$OPENCONNECT $IP:$PORT_OCSERV -u test --passwd-on-stdin -v --servercert=d66b507ae074d03b02eafca40d35f87dd81049d3 --cookieonly < pass-full$TMP
-if test $? = 0;then
-	echo "Authentication with wrong password succeeded!"
-	stop
-fi
-
-$ECHO_E "test" >pass-full$TMP
-$OPENCONNECT $IP:$PORT_OCSERV -u testuser --passwd-on-stdin -v --servercert=d66b507ae074d03b02eafca40d35f87dd81049d3 --cookieonly < pass-full$TMP
-if test $? = 0;then
-	echo "Authentication with wrong username succeeded!"
-	stop
-fi
-
-echo ""
-echo "Connecting with correct username"
-$ECHO_E "test" >pass-full$TMP
-$OPENCONNECT $IP:$PORT_OCSERV -b --pid-file $PIDFILE -u test --passwd-on-stdin -v --servercert=d66b507ae074d03b02eafca40d35f87dd81049d3 < pass-full$TMP
-if test $? != 0;then
-	echo "Cannot connect to server"
-	stop
-fi
-
-#wait for openconnect
-sleep 5
-
-rm -f pass-full$TMP
-if [ ! -f $PIDFILE ];then
-	echo "It was not possible to establish session!"
-	stop
-fi
-
-PID=`cat $PIDFILE`
-rm -f $PIDFILE
-
-# The client IP depends on the username so it shouldn't change.
-ping -w 5 192.168.79.1
-if test $? != 0;then
-	kill -INT $PID
-	echo "Cannot ping ocserv"
-	stop
-fi
-
-ping -w 5 192.168.79.1 -s 1500
-if test $? != 0;then
-	kill -INT $PID
-	echo "Cannot ping ocserv"
-	stop
-fi
-
-ping6 -w 5 fd91:6d87:7341:db6a::1
-if test $? != 0;then
-	kill -INT $PID
-	echo "Cannot ping the IPv6 of ocserv"
-	stop
-fi
-
-retrieve_user_info test
-
-# There is an issue in nuttcp that makes it crash under docker if
-# /proc/sys/net/ipv4/tcp_adv_win_scale does not exist.
-if test "$FEDORA" = 1;then
-nuttcp -T 10 -t 192.168.79.1
-if test $? != 0;then
-	echo "Cannot send to ocserv"
-	exit 77
-	kill -INT $PID
-	stop
-fi
-
-nuttcp -T 10 -r 192.168.79.1
-if test $? != 0;then
-	echo "Cannot recv from ocserv"
-	exit 77
-	kill -INT $PID
-	stop
-fi
-fi
-
-sleep 2
-
-kill -INT $PID
-
-sleep 4
-
-#check whether /tmp/disconnect/ok was created
-check_for_file /tmp/disconnect/not-ok
-if test $? = 0;then
-	echo "There was an issue"
-	stop
-fi
-
-check_for_file /tmp/disconnect/ok
-if test $? != 0;then
-	echo "There was an issue getting stats"
-	ret=77
-fi
-
-$DOCKER stop $IMAGE_NAME
-$DOCKER rm $IMAGE_NAME
-
-exit $ret

tests/ns.sh

@@ -40,6 +40,17 @@ if test "$(id -u)" != "0";then
 	exit 77
 fi
 
+ip netns list >/dev/null 2>&1
+if test $? != 0;then
+	echo "This test requires ip netns command"
+	exit 77
+fi
+
+if test "$(uname -s)" != Linux;then
+	echo "This test must be run on Linux"
+	exit 77
+fi
+
 function nsfinish {
   set +e
   test -n "${ETHNAME1}" && ${IP} link delete ${ETHNAME1} >/dev/null 2>&1

tests/traffic

@@ -0,0 +1,143 @@
+#!/bin/bash
+#
+# Copyright (C) 2018 Nikos Mavrogiannopoulos
+#
+# This file is part of ocserv.
+#
+# ocserv is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at
+# your option) any later version.
+#
+# ocserv is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+OCCTL="${OCCTL:-../src/occtl/occtl}"
+SERV="${SERV:-../src/ocserv}"
+srcdir=${srcdir:-.}
+PORT=4568
+PIDFILE=ocserv-pid.$$.tmp
+CLIPID=oc-pid.$$.tmp
+PATH=${PATH}:/usr/sbin
+IP=$(which ip)
+OUTFILE=traffic.$$.tmp
+
+. `dirname $0`/common.sh
+
+if test -z "${IP}";then
+	echo "no IP tool is present"
+	exit 77
+fi
+
+if test "$(id -u)" != "0";then
+	echo "This test must be run as root"
+	exit 77
+fi
+
+echo "Testing ocserv connection via haproxy... "
+
+function finish {
+  set +e
+  echo " * Cleaning up..."
+  test -n "${PID}" && kill ${PID} >/dev/null 2>&1
+  test -n "${PIDFILE}" && rm -f ${PIDFILE} >/dev/null 2>&1
+  test -n "${CLIPID}" && kill $(cat ${CLIPID}) >/dev/null 2>&1
+  test -n "${CLIPID}" && rm -f ${CLIPID} >/dev/null 2>&1
+  test -n "${CONFIG}" && rm -f ${CONFIG} >/dev/null 2>&1
+  rm -f ${OUTFILE} 2>&1
+}
+trap finish EXIT
+
+# server address
+ADDRESS=10.200.2.1
+CLI_ADDRESS=10.200.1.1
+VPNNET=192.168.1.0/24
+VPNADDR=192.168.1.1
+VPNNET6=fd91:6d87:7341:db6a::/112
+VPNADDR6=fd91:6d87:7341:db6a::1
+OCCTL_SOCKET=./occtl-traffic-$$.socket
+USERNAME=test
+
+. `dirname $0`/ns.sh
+
+# Run servers
+update_config test-traffic.config
+if test "$VERBOSE" = 1;then
+DEBUG="-d 3"
+fi
+
+${CMDNS2} ${SERV} -p ${PIDFILE} -f -c ${CONFIG} ${DEBUG} & PID=$!
+
+sleep 4
+
+# Run clients
+echo " * Getting cookie from ${ADDRESS}:${PORT}..."
+( echo "test" | ${CMDNS1} ${OPENCONNECT} ${ADDRESS}:${PORT} -u ${USERNAME} --servercert=d66b507ae074d03b02eafca40d35f87dd81049d3 --cookieonly )
+if test $? != 0;then
+	echo "Could not get cookie from server"
+	exit 1
+fi
+
+echo " * Connecting to ${ADDRESS}:${PORT}..."
+( echo "test" | ${CMDNS1} ${OPENCONNECT} ${ADDRESS}:${PORT} -u ${USERNAME} --servercert=d66b507ae074d03b02eafca40d35f87dd81049d3 -s ${srcdir}/scripts/vpnc-script --pid-file=${CLIPID} --passwd-on-stdin -b )
+if test $? != 0;then
+	echo "Could not connect to server"
+	exit 1
+fi
+
+set -e
+echo " * ping remote address"
+
+${CMDNS2} nuttcp -1
+
+${CMDNS1} ping -c 3 ${VPNADDR}
+
+sleep 2
+
+echo " * Transmitting with nuttcp"
+
+${CMDNS1} nuttcp -T 6 -t ${VPNADDR}
+
+# IPv6
+
+${CMDNS2} nuttcp -1
+
+${CMDNS1} ping -c 3 ${VPNADDR6}
+
+echo " * Receiving with nuttcp"
+
+${CMDNS1} nuttcp -T 6 -r ${VPNADDR}
+
+set +e
+
+${OCCTL} -s ${OCCTL_SOCKET} show users|grep ${USERNAME}
+if test $? != 0;then
+	echo "occtl didn't find connected user!"
+	exit 1
+fi
+
+${OCCTL} -s ${OCCTL_SOCKET} show user ${USERNAME} >${OUTFILE}
+if test $? != 0;then
+	echo "occtl didn't find connected user!"
+	exit 1
+fi
+
+grep Username ${OUTFILE}|grep ${USERNAME}
+if test $? != 0;then
+	echo "occtl show user didn't find connected user!"
+	exit 1
+fi
+
+grep ${CLI_ADDRESS} ${OUTFILE}
+if test $? != 0;then
+	echo "occtl show user didn't find client address!"
+	exit 1
+fi
+
+exit 0