ocserv/tests/data/test-client-bypass-protocol.config

# User authentication method. Could be set multiple times and in that case
# all should succeed.
# Options: certificate, pam. 
auth = "certificate"
#auth = "plain[@SRCDIR@/data/test-group.passwd]"
#auth = "pam"

isolate-workers = @ISOLATE_WORKERS@

# A banner to be displayed on clients
#banner = "Welcome"

# Use listen-host to limit to specific IPs or to the IPs of a provided hostname.
#listen-host = [IP|HOSTNAME]

use-dbus = no

# Limit the number of clients. Unset or set to zero for unlimited.
#max-clients = 1024
max-clients = 16

# Limit the number of client connections to one every X milliseconds 
# (X is the provided value). Set to zero for no limit.
#rate-limit-ms = 100

# Limit the number of identical clients (i.e., users connecting multiple times)
# Unset or set to zero for unlimited.
max-same-clients = 2

# TCP and UDP port number
tcp-port = @PORT@
udp-port = @PORT@

# Keepalive in seconds
keepalive = 32400

# Dead peer detection in seconds
dpd = 440

# MTU discovery (DPD must be enabled)
try-mtu-discovery = false

# The key and the certificates of the server
# The key may be a file, or any URL supported by GnuTLS (e.g., 
# tpmkey:uuid=xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx;storage=user
# or pkcs11:object=my-vpn-key;object-type=private)
#
# There may be multiple certificate and key pairs and each key
# should correspond to the preceding certificate.
server-cert = @SRCDIR@/certs/server-cert.pem
server-key = @SRCDIR@/certs/server-key.pem

# Diffie-Hellman parameters. Only needed if you require support
# for the DHE ciphersuites (by default this server supports ECDHE).
# Can be generated using:
# certtool --generate-dh-params --outfile /path/to/dh.pem
#dh-params = /path/to/dh.pem

# If you have a certificate from a CA that provides an OCSP
# service you may provide a fresh OCSP status response within
# the TLS handshake. That will prevent the client from connecting
# independently on the OCSP server.
# You can update this response periodically using:
# ocsptool --ask --load-cert=your_cert --load-issuer=your_ca --outfile response
# Make sure that you replace the following file in an atomic way.
#ocsp-response = /path/to/ocsp.der

# In case PKCS #11 or TPM keys are used the PINs should be available
# in files. The srk-pin-file is applicable to TPM keys only (It's the storage
# root key).
#pin-file = /path/to/pin.txt
#srk-pin-file = /path/to/srkpin.txt

# The name of the group that if selected it would allow to use
# the assigned by default group.
default-select-group = group1

# Instead of specifying manually all the allowed groups, you may instruct
# ocserv to scan all available groups and include the full list. That
# option is only functional on plain authentication.
#auto-select-group = true

select-group = group1
select-group = group3[Do not tunnel access LAN subnet]

# The Certificate Authority that will be used
# to verify clients if certificate authentication
# is set.
ca-cert = @SRCDIR@/certs/ca.pem

# The object identifier that will be used to read the user ID in the client certificate.
# The object identifier should be part of the certificate's DN
# Useful OIDs are: 
#  CN = 2.5.4.3, UID = 0.9.2342.19200300.100.1.1
cert-user-oid = 0.9.2342.19200300.100.1.1

# The object identifier that will be used to read the user group in the client 
# certificate. The object identifier should be part of the certificate's DN
# Useful OIDs are: 
#  OU (organizational unit) = 2.5.4.11 
#cert-group-oid = 2.5.4.11

# A revocation list of ca-cert is set
#crl = /path/to/crl.pem

# GnuTLS priority string
tls-priorities = "PERFORMANCE:%SERVER_PRECEDENCE:%COMPAT"

# To enforce perfect forward secrecy (PFS) on the main channel.
#tls-priorities = "NORMAL:%SERVER_PRECEDENCE:%COMPAT:-RSA"

# The time (in seconds) that a client is allowed to stay connected prior
# to authentication
auth-timeout = 40

# The time (in seconds) that a client is not allowed to reconnect after 
# a failed authentication attempt.
#min-reauth-time = 2

# Script to call when a client connects and obtains an IP
# Parameters are passed on the environment.
# REASON, USERNAME, GROUPNAME, HOSTNAME (the hostname selected by client), 
# DEVICE, IP_REAL (the real IP of the client), IP_LOCAL (the local IP
# in the P-t-P connection), IP_REMOTE (the VPN IP of the client). REASON
# may be "connect" or "disconnect".
#connect-script = /usr/bin/myscript
#disconnect-script = /usr/bin/myscript

# UTMP
use-utmp = true

# PID file
pid-file = ./ocserv.pid

# The default server directory. Does not require any devices present.
#chroot-dir = /path/to/chroot

# socket file used for IPC, will be appended with .PID
# It must be accessible within the chroot environment (if any)
socket-file = ./ocserv-socket

# The user the worker processes will be run as. It should be
# unique (no other services run as this user).
run-as-user = @USERNAME@
run-as-group = @GROUP@

# Network settings

device = vpns

# The default domain to be advertised
default-domain = example.com

ipv4-network = 192.168.1.0
ipv4-netmask = 255.255.255.0
# Use the keywork local to advertize the local P-t-P address as DNS server
ipv4-dns = 192.168.1.1

# The NBNS server (if any)
#ipv4-nbns = 192.168.2.3

#ipv6-address = 
#ipv6-mask = 
#ipv6-dns = 

# Prior to leasing any IP from the pool ping it to verify that
# it is not in use by another (unrelated to this server) host.
ping-leases = false

# Leave empty to assign the default MTU of the device
# mtu = 

no-route = 192.168.98.0/255.255.255.0
route = default

#
# The following options are for (experimental) AnyConnect client 
# compatibility. They are only available if the server is built 
# with --enable-anyconnect
#

# Client profile xml. A sample file exists in doc/profile.xml.
# This file must be accessible from inside the worker's chroot. 
# The profile is ignored by the openconnect client.
#user-profile = profile.xml

# Unless set to false it is required for clients to present their
# certificate even if they are authenticating via a previously granted
# cookie. Legacy CISCO clients do not do that, and thus this option
# should be set for them.
#always-require-cert = false