ocserv/doc/sample.config

# User authentication method. Could be set multiple times and in that case
# all should succeed.
# Options: certificate, pam. 
#auth = "certificate"
auth = "pam"

# A banner to be displayed on clients
#banner = "Welcome"

# Client config xml. The variable $GROUP will be replaced by
# the user's group name. This file must be accessible from inside
# the worker's chroot. It is not used by the openconnect client.
#user-profile = /profile.xml

# Unless set to false it is required for clients to present their
# certificate even if they are authenticating via a previously granted
# cookie. Legacy CISCO clients do not do that, and thus this option
# should be set for them.
#always-require-cert = false

# Use listen-host to limit to specific IPs or to the IPs of a provided hostname.
#listen-host = [IP|HOSTNAME]

# Limit the number of clients. Unset or set to zero for unlimited.
#max-clients = 1024
max-clients = 16

# Limit the number of identical clients (i.e., users connecting multiple times)
# Unset or set to zero for unlimited.
max-same-clients = 2

# TCP and UDP port number
tcp-port = 443
udp-port = 443

# Keepalive in seconds
keepalive = 32400

# Dead peer detection in seconds
dpd = 440

# MTU discovery (DPD must be enabled)
try-mtu-discovery = false

# The key and the certificates of the server
# The key may be a file, or any URL supported by GnuTLS (e.g., 
# tpmkey:uuid=xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx;storage=user
# or pkcs11:object=my-vpn-key;object-type=private)
server-cert = ../test-cert.pem
server-key = ../test-key.pem

# In case PKCS #11 or TPM keys are used the PINs should be available
# in files. The srk-pin-file is applicable to TPM keys only (It's the storage
# root key).
#pin-file = /path/to/pin.txt
#srk-pin-file = /path/to/srkpin.txt

# The Certificate Authority that will be used
# to verify clients if certificate authentication
# is set.
#ca-cert = /path/to/ca.pem

# The object identifier that will be used to read the user ID in the client certificate.
# The object identifier should be part of the certificate's DN
# Useful OIDs are: 
#  CN = 2.5.4.3, UID = 0.9.2342.19200300.100.1.1
#cert-user-oid = 0.9.2342.19200300.100.1.1

# The object identifier that will be used to read the user group in the client 
# certificate. The object identifier should be part of the certificate's DN
# Useful OIDs are: 
#  OU (organizational unit) = 2.5.4.11 
#cert-group-oid = 2.5.4.11

# A revocation list of ca-cert is set
#crl = /path/to/crl.pem

# GnuTLS priority string
tls-priorities = "PERFORMANCE:%SERVER_PRECEDENCE"

# The default server directory
#chroot-dir = /path/to/chroot

# The time (in seconds) that a client is allowed to stay connected prior
# to authentication
auth-timeout = 40

# Cookie validity time (in seconds)
# Once a client is authenticated he's provided a cookie with
# which he can reconnect. This option sets the maximum lifetime
# of that cookie.
cookie-validity = 172800

# A cookie database. If not set cookies are stored in memory and
# server restarts won't preserve them.
#cookie-db = /var/tmp/cookies.db

# Script to call when a client connects and obtains an IP
# Parameters are passed on the environment.
# USERNAME, GROUPNAME, HOSTNAME (the hostname selected by client), 
# DEVICE, IP_REAL (the real IP of the client), IP_LOCAL (the local IP
# in the P-t-P connect), IP_REMOTE (the VPN IP of the client).
#connect-script = /usr/bin/myscript
#disconnect-script = /usr/bin/myscript

# UTMP
use-utmp = true

# PID file
pid-file = /var/run/ocserv.pid

run-as-user = nobody
run-as-group = nogroup

# Network settings

device = vpns

ipv4-network = 192.168.1.0
ipv4-netmask = 255.255.255.0
# Use the keywork local to advertize the local P-t-P address as DNS server
# ipv4-dns = 192.168.2.1
ipv4-dns = local

#ipv6-address = 
#ipv6-mask = 
#ipv6-dns = 

# Leave empty to assign the default MTU of the device
# mtu = 

route = 192.168.1.0/255.255.255.0
#route = 192.168.5.0/255.255.255.0