mirror of
https://gitlab.com/openconnect/ocserv.git
synced 2026-02-10 00:37:00 +08:00
130 lines
3.5 KiB
Markdown
130 lines
3.5 KiB
Markdown
Using Radius with ocserv
|
|
========================
|
|
|
|
For radius support the [radcli library](http://radcli.github.io/radcli/)
|
|
is required. The minimum requirement is version 1.2.0. Alternatively
|
|
the freeradius-client library can be used (1.1.7 is the minimum
|
|
requirement), but not all radius features may be available.
|
|
|
|
radcli uses a configuration file to setup the
|
|
server configuration. That is typically found at:
|
|
/etc/radcli/radiusclient.conf
|
|
and is best to copy the default installed as radiusclient-ocserv.conf
|
|
and edit it accordingly.
|
|
|
|
The important options for ocserv usage are the following:
|
|
```
|
|
dictionary /etc/radcli/dictionary
|
|
servers /etc/radcli/servers
|
|
```
|
|
|
|
The dictionary should contain at least the attributes shown below,
|
|
and the servers file should contain the radius server to use.
|
|
|
|
Note, that ocserv provides the 'NAS-Port' attribute to server,
|
|
which corresponds to the worker process PID value. This PID value
|
|
may change during accounting (because the client may be handled
|
|
by a different process/port). To make the port change, not affect
|
|
the radius server's unique ID, you must configure the server
|
|
not to account NAS-Port. In freeradius servers for example you
|
|
have to remove the NAS-Port attribute from the acct_unique section.
|
|
|
|
|
|
Ocserv configuration
|
|
====================
|
|
|
|
For authentication the following line should be enabled.
|
|
```
|
|
auth = "radius[config=/etc/radcli/radiusclient.conf,groupconfig=true]"
|
|
```
|
|
|
|
Check the ocserv manpage for the meaning of the various options
|
|
such as groupconfig.
|
|
|
|
To enable accounting, use
|
|
```
|
|
acct = "radius[config=/etc/radcli/radiusclient.conf]"
|
|
```
|
|
|
|
and modify the following option to the time (in
|
|
seconds), that accounting information should be reported.
|
|
```
|
|
stats-report-time = 360
|
|
```
|
|
|
|
That value will be overridden by Acct-Interim-Interval if sent
|
|
by the server.
|
|
|
|
|
|
Dictionary
|
|
==========
|
|
|
|
Ocserv supports the following radious attributes.
|
|
|
|
```
|
|
# Standard attributes
|
|
ATTRIBUTE User-Name 1 string
|
|
ATTRIBUTE Password 2 string
|
|
ATTRIBUTE NAS-Port 5 integer
|
|
ATTRIBUTE Framed-Protocol 7 integer
|
|
ATTRIBUTE NAS-Identifier 32 string
|
|
ATTRIBUTE Acct-Input-Octets 42 integer
|
|
ATTRIBUTE Acct-Output-Octets 43 integer
|
|
ATTRIBUTE Acct-Session-Id 44 string
|
|
ATTRIBUTE Acct-Input-Gigawords 52 integer
|
|
ATTRIBUTE Acct-Output-Gigawords 53 integer
|
|
ATTRIBUTE Acct-Interim-Interval 85 integer
|
|
ATTRIBUTE Connect-Info 77 string
|
|
|
|
|
|
###########################
|
|
# IPv4 attributes #
|
|
###########################
|
|
|
|
# sets local IPv4 address in link:
|
|
ATTRIBUTE NAS-IP-Address 4 ipaddr
|
|
# sets remote IPv4 address in link:
|
|
ATTRIBUTE Framed-IP-Address 8 ipaddr
|
|
ATTRIBUTE Framed-IP-Netmask 9 ipaddr
|
|
|
|
# sets routes (quite a kludge as it requires to have
|
|
# a CIDR string)
|
|
ATTRIBUTE Framed-Route 22 string
|
|
|
|
# Sets group name using format "OU=group1;group2"
|
|
# Note that the groups sent by the server must be made known
|
|
# to ocserv, via the select-group variable.
|
|
ATTRIBUTE Class 25 string
|
|
|
|
# sets DNS servers
|
|
VENDOR Microsoft 311
|
|
|
|
BEGIN-VENDOR Microsoft
|
|
|
|
ATTRIBUTE MS-Primary-DNS-Server 28 ipaddr
|
|
ATTRIBUTE MS-Secondary-DNS-Server 29 ipaddr
|
|
|
|
END-VENDOR Microsoft
|
|
|
|
|
|
############################
|
|
# IPv6 attributes #
|
|
############################
|
|
|
|
# sets local IPv6 address in link:
|
|
ATTRIBUTE NAS-IPv6-Address 95 string
|
|
|
|
# sets remote IPv6 subnet in link:
|
|
ATTRIBUTE Delegated-IPv6-Prefix 123 ipv6prefix
|
|
|
|
# sets remote IPv6 address in link:
|
|
ATTRIBUTE Framed-IPv6-Address 168 ipv6addr
|
|
|
|
# sets DNS servers
|
|
ATTRIBUTE DNS-Server-IPv6-Address 169 ipv6addr
|
|
|
|
# Sets IPv6 routes
|
|
ATTRIBUTE Framed-IPv6-Prefix 97 ipv6prefix
|
|
ATTRIBUTE Route-IPv6-Information 170 ipv6prefix
|
|
```
|